Plant Productions - Articles List

Simulating response of lentil cultivars to sowing date and initial soil moisture in Lorestan province

Mojtaba Koohro; Sajjad Rahimi-Moghaddam; khosro Azizi; Saeid Heidari; Seyed Reza Amiri

Articles in Press, Accepted Manuscript, Available Online from 17 April 2024

https://doi.org/10.22055/ppd.2024.45041.2127

Abstract

Abstract Introduction Lentil is recognized as one of important legumes due to its favourable characteristics. The lintile production, like to other crops has been influenced by three ... Read More Abstract Introduction Lentil is recognized as one of important legumes due to its favourable characteristics. The lintile production, like to other crops has been influenced by three factors: management, genetics, and environment. Improving crop production can be achieved by optimizing these factors. Thus, paying attention to the above-mentioned factors can reduce the severe climatic effects on crop production. Among the above-mentioned factors, management strategies e.g., optimal sowing date and using the optimal cultivar are considered to improve crop production. Initial soil moisture, which can affect crop germination, establishment and ultimately growth and yield, is another important strategy. Accordingly, the current research was conducted in order to simulate the effects of cultivar, sowing date, and initial soil moisture on lentil grian yield in different locations of Lorestan province. Materials and Methods The study locations were Aligudarz, Nurabad, KhorramAbad, and Kuhdasht. Simple Simulation Models-iCrop2 (SSM-iCrop2) was used to simulate the lentil growth and development. The data required to run model included climatic, soil, management, and crop data. Daily long-term climatic data including maximum and minimum temperature, rainfall, and radiation were collected from Iran Meteorological Organization The crop data e.g., the specific genetic coefficients of each cultivar were obtained form Amiri and Deihimfard (2018). The study treatments consisted of four sowing dates (21 January, 12 February, 4 March, and 30 April), two cultivars (early-maturity and late-maturity) and four initial soil moisture (32, 36, 42, and 58 mm). The model was run for 41 years (1980-2020). Initial soil water contents and sowing dates were obtained from a preliminary simulation experiment. Results and Discussion Averaged across all treatments, the highest grain yield was obtained at KhorramAbad (388 kg ha-1) due to higher rainfall during the growing season. In addition, the grain yield difference among the sowing dates ranged from kg ha-1 on 30 April to 364 kg ha-1 on 21 January. The reason for the higher grain yield on 21 January sowing date was the higher cumulative rainfall season (149.3 mm vs. 99.2 mm) and the lower mean temperature (22.9 °C vs. 23.9 °C) during the growing season compared to other sowing dates. Across locations, sowing dates, and cultivars, the highest grain yield (263 kg ha-1) was simulated under initial soil moisture of 58 mm. Also, on average across sowing dates, initial soil moisture contents, and locations, the early-maturity cultivar simulated more grain yield than late-maturity cultivar (405 kg ha-1 vs. 63 kg ha-1) due to the avoidance of drought stress at the end of the growing season. Considering different interactions, on average across locations, the highest grain yield was simulated by 704 kg ha-1 in the combination of early-maturity cultivar, early sowing date (21 January), and initial soil moisture of 58 mm. Conclusion In general, the results indicated that the lentil grain yield varied among the various study treatments (sowing date, cultivar, and initial soil moisture) as well as different locations of Lorestan province. Lentil growers can increase the lentil production in Lorestan province and study locations by using the interaction of early planting date (21 January)  early-maturity cultivar (Kimia)  higher initial soil moisture (58 mm). It should be noted that the current research was conducted under water-limited condition and it is suggested that researchers focus on other limitimg and reducing factors in the future studies.

View Article

Introduction and evaluation of agronomic features of commercial non-shattering (indehiscent) sesame cultivars named Barkat, Mohajer, Chamran and Dezful

Mohammad reza Siahpoosh; Leila Nejadsadeghi; Mohammad Sina Siahpoosh; saman sheidaie; Enayat Rezvani; Hossein Sadeghi

Volume 46, Issue 4 , March 2024, , Pages 473-490

https://doi.org/10.22055/ppd.2024.46295.2149

Abstract

Introduction Sesame is one of the most important oil plants in the world, especially in arid and semi-arid regions and is known as the queen of oil seeds. The high percentage of ... Read More Introduction Sesame is one of the most important oil plants in the world, especially in arid and semi-arid regions and is known as the queen of oil seeds. The high percentage of oil with the combination of suitable fatty acids, medicinal properties and very low water requirement are the characteristics of this oil plant. The main challenge for the lack of development of sesame cultivation all over the world is seed shattering at the time of ripening. Many efforts have been made to obtain non-shattering sesame cultivars with the characteristics of indehiscent capsule at the ripening stage and resistance to seed loss. In this article, we introduce and evaluate the agronomic characteristics of new indehiscent sesame cultivars named Barkat, Mohajer, Chamran and Dezful. Material and Methods Indehiscent sesame cultivars with the proposed names of Barkat, Mohajer, Chamran and Dezful have been improved during a breeding program at Shahid Chamran University of Ahvaz in collaboration with Shahid Rajaei Agriculture Company. For registration and commercialization, these cultivars were subjected to Distinctness, Uniformity and Stability (DUS) tests and agricultural Value of Cultivation and Use (VCU) experiments under the supervision of the Seed & Plant Certification and Registration Research Institute during the two cropping years 2022-2023. In these experiments, new indehiscent sesame cultivars along with commercial cultivars of dehiscent sesame named Oltan, Sardar and Shevin as control cultivars were evaluated in four regions with different climatic conditions of Iran, including Dezful, Darab, Mughan and Gorgan in the frame of complete blocks design with four replications. In addition, the mechanized cultivation of four promising indehiscent sesame cultivars was performed separately in 100-hectare fields in the Dezful region, and harvesting was done with a combine harvester. Results and DiscussionThe highest plant height was obtained in Barkat with an average of 144 cm and the lowest in Chamran with 140 cm. The highest number of capsules per plant, with an average of 89.8 and the highest number of seeds per capsule, with an average of 72.3, was observed in the Mohajer. The thousand-seed weight was reported between 2.41 and 3.72 g in Dezful and Mohajer respectively. A significant difference (P≤0.01) was observed in the group comparison between indehiscent and dehiscent (control) sesame cultivars, whilst dehiscent cultivars with an average of 1.05 tons per hectare were completely superior to the control cultivars with 0.80 tons per hectare. The highest average seed yield of cultivars in different regions during two years of experiment was obtained with 1.08 tons per hectare in Barkat and Mohajer cultivars. In the mechanized harvesting of indehiscent sesame cultivars with a combine harvester, the amount of seed loss was estimated to be less than 2.8%. The evaluation of morphological traits showed that indehiscent sesame cultivars had indeterminate growth habits and could produce 1-6 sub-branches per plant depending on the genotype and plant density. The superiority of seed yield for all indehiscent sesame cultivars was observed in compare with the control cultivars. The indehiscent sesame cultivars had appropriate agronomic features and could increasing about 24% seed yield in compare to control cultivars. This issue promises a significant increase in sesame production in Iran.ConclusionFinally, Barkat, Mohajer, Chamran and Dezful sesame cultivars were introduced as the first cultivars with resistance to seed shattering during ripening in the country. In addition to the higher seed yield in compare to the control cultivars. These cultivars are able to be harvested using a combine harvester in the mechanized systems at the time of full ripening. Ultimately, the widespread use of these cultivars in the agricultural cultivation pattern of the country promises food security in oil production and water consumption reduction in the stressful season of summer.

Reducing the physiological effects of heat stress at the end of the growing season by using boron in three varieties of rapeseed (Brassica napus L.)

Seyyed Mohammad Mola; Mohammad Reza Moradi Telavat; Ali Moshattati; Ali Ghatei; Nafiseh Rangzan

Volume 46, Issue 3 , December 2023, , Pages 367-380

https://doi.org/10.22055/ppd.2023.43212.2091

Abstract

IntroductionAmong the most common problems and stress in the conditions of Khuzestan province, heat stress at the end of the season and the deficiency of nutrients, which occurs in ... Read More IntroductionAmong the most common problems and stress in the conditions of Khuzestan province, heat stress at the end of the season and the deficiency of nutrients, which occurs in different periods of rapeseed growth, depending on their severity, causes physiological and metabolic disorders and ultimately reduces the yield of rapeseed plants with different intensity depending on the type of plant genotype, they affect Materials and MethodsWith the aim of evaluating the growth and yield response of rapeseed cultivars (Brassica napus) to boron element levels in late season heat stress conditions caused by late sowings dates, this study was carried out in a split-split plot arrangement in the form of a randomized complete block design with three replications. The expeiment was carried out in the crop year of 2021-2022 in the research farm of Agricultural Sciences and Natural Resources University of Khuzestan. Sowings dates (November 21, December 11, and December 31) in the main plots, four levels of boron (zero, 4, 8, and 12 kg/ha) in the subplots and rapeseed cultivars (RGS, Zafar, and Saffar) in the sub-sub-plots were investigated. Results and DiscussionThe results of the research showed that sowing date and end of season heat stress in Khuzestan conditions had a significant effect on most of the studied physiological traits, seed yield and biological yield. In addition, the effect of boron on traits such as leaf area index, leaf area ratio, and relative moisture content of leaf water, leakage of electrolytes, grain yield and biological performance was significant. The triple interaction effect of planting date, boron and variety was also significant on traits such as relative moisture content of leaf water, leakage of electrolytes, grain yield, and biological performance. So that with the delay in planting and the consequent increase in temperature and heat stress at the end of the season in the period of growth of the rapeseed plant, it causes a decrease in traits such as leaf area index, relative moisture content of leaf water, leaf area ratio, leaf specific area, seed yield and biological yield. And conversely, due to the heat stress at the end of the season, the leakage of electrolytes and the canopy temperature increased significantly. In general, the highest seed yield was obtained in Safar variety on the sowing date of December 11 and the boron level was 4 kg/ha with an average of 4590 kg/ha. Also, the highest average leaf area index was observed on the first sowing date and Safar variety with an average of 5.43 and the lowest value was observed on the third sowing date and Safar variety with an average of 2.11. It was also observed that the application of boron caused a significant decrease in the leaf area index in all three studied cultivars. This issue can indicate the lower need of boron consumption of the studied cultivars in this experiment. ConclusionIn general, the heat stress at the end of the season, which occurs in different periods of rapeseed growth, especially the seed filling period, depending on its intensity, causes physiological disorders in the plant and finally affects the grain yield with different intensity and depending on the genotype of the plant. The analyzed rapeseed genotypes also showed tolerance to different levels of boron element in the heat stress conditions of the end of the season and showed different reactions with different amounts of boron consumption per hectare

Response of camellia yield and yield components to planting date and distance in Mazandaran province

Faezeh Zaefarian; Hamidreza Ghorbani; Parastoo Majidian; Mohammad Kaveh

Volume 46, Issue 3 , December 2023, , Pages 427-440

https://doi.org/10.22055/ppd.2024.44449.2117

Abstract

IntroductionThe production of oilseeds plays a significant role in saving currency, accelerating the process of economic development, security and food independence of the country. ... Read More IntroductionThe production of oilseeds plays a significant role in saving currency, accelerating the process of economic development, security and food independence of the country. Camellia (Camelina sativa L. Crantz) from Brassicaceae family, is able to grow in different weather and soil conditions and requires less water, fertilizer and pesticides than other oilseeds. Therefore, the current research was conducted with the aim of introducing this plant and evaluating its yield potential and cultivation compatibility in Mazandaran.Materials and MethodsThis experiment was carried out as factorial based on randomized complete block design in four replications at Bayekola Agricultural Research Station (Mazandaran Agricultural and Natural Resources Research and Training Center). Six sowing dates (November 5, November 21, December 5, December 21, January 4 and January 19) and five planting distances (15, 20, 25, 30, and 35 cm) were selected as the study factors.Results and DiscussionThe results of analysis of variance showed that the treatments of planting distance and planting date had a significant effect on different traits of camellia plant. Plant height, number of sub-branches and biological yield were influenced by the interaction effect of the studied factors. The highest plant height values were observed on the planting date of November 15 and at 20 and 30 cm intervals (125.5 and 124.75 cm, respectively). Also, the characteristics of seed yield, days to flowering, days to maturity, the number of seeds in a pod and 1000 grain weight were affected by sowing date factor, and the traits of days to flowering, days to maturity and 1000 grain weight were affected by planting distance factor.ConclusionIn the field of seed production and obtaining more seed yield, although the planting dates of November 5 to December 5 did not have significant differences with each other; but the planting date of November 21 is the best possible planting date due to the highest seed yield and the higher number of seeds in the pod. Also, the treatment combination of planting distance of 25 cm and planting date of December 5 with high biological yield can be a suitable treatment combination..

The effect of nitrogen application on some quantitative and qualitative characteristics of barley mixed with vetch

Hossein Neyestani; Hamid Abbasdokht; Ahmad Gholami

Volume 46, Issue 2 , September 2023, , Pages 171-183

https://doi.org/10.22055/ppd.2023.42974.2080

Abstract

Introduction One of the main goals of sustainable agriculture is controlling soil erosion, stabilizing yield in unfavorable conditions and increasing yield in favorable environmental ... Read More Introduction One of the main goals of sustainable agriculture is controlling soil erosion, stabilizing yield in unfavorable conditions and increasing yield in favorable environmental conditions, and finally creating diversity and stability in agricultural ecosystems. Mixed cultivation is a part of crop rotation program in sustainable farming systems. One of the most important advantages of mixed cultivation over pure cultivation is that in the mixed state, the plants show more compatibility together and increases the total yield. Among the different types of mixed cropping systems that are currently used by farmers, one-year mixed cropping systems are more economical and are of interest to most farmers. It also includes many positive aspects including increasing yield and increasing land equivalent ratio. Materials and Methods In order to study the production potential and competitive ability of barley and vetch plants in the mixed cropping pattern under the influence of different planting patterns and nitrogen use, an experiment was conducted in the crop year 2017-2018 in Shirvan Rain Research Station of North Khorasan Province. The experiment was in the form of split plots based on a randomized complete block design. The main factor includes nitrogen fertilizer at three levels (zero, 50 and 100 kilograms per hectare) and the secondary factor of different cultivation patterns at five levels (pure barley, pure vetch, incremental ratios of 15, 30 and 45% of vetch plant increase to barley plant density). And the cultivation was of a mixed and incremental type. Results and Discussion According to the results of the experiment, the highest value of 1000-grains weight in the treatment of pure barley cultivation and the use of 50 and 100 kg of nitrogen per hectare (52.75 grams) and in the treatment of mixed cultivation of 100:30 and in the absence of nitrogen use, the lowest value of 1000-garins weight ( 45 grams), the highest number of seeds per spike in nitrogen 100 kg per hectare and mixed cultivation 100:30 with an average of 17.25 and the least amount of this trait in the treatment of no use of nitrogen and pure barley cultivation with an average of 10.8 seeds It was at the peak. Also, the highest seed yield was obtained in the pure cultivation of barley and in the nitrogen treatment of 100 kg (1515 kg) and the lowest was obtained in the mixed crop of 100:45 and the fertilizer treatment of no nitrogen use (732.5 kg). The mixture of 45:100 and 50 kg of nitrogen had the highest amount (1.158). Conclusion According to the results of LER, the use of vetch as a nitrogen-fixing species along with the consumption of 50 kg of nitrogen fertilizer per hectare can be effective to achieve the optimal yield.

Evaluation of yield performance of a shattering tolerant sesame genotype under different Planting arrangements in the Darab and Dezful region

Majid Gholamhoseini; Gholamreza Ghodrati; Abolghasem Alhani; Saadolah Mansori; Farnaz Shariati

Volume 46, Issue 2 , September 2023, , Pages 293-305

https://doi.org/10.22055/ppd.2023.43685.2100

Abstract

Introduction Sesame is a low-expected and low-input crop among oilseed crops, which holds economic significance not only in subsistence agriculture in arid and semi-arid regions of ... Read More Introduction Sesame is a low-expected and low-input crop among oilseed crops, which holds economic significance not only in subsistence agriculture in arid and semi-arid regions of Iran but also in terms of its agronomical characteristics. Shattering tolerant sesame genotypes are crucial for developing sesame cultivation in countries such as Iran. There is a lack of comprehensive information on crop management, including the optimal planting arrangement for imported shattering tolerant sesame genotypes. Therefore, this research was planned and executed to answer the questions regarding the proper planting arrangement of this genotype in two crucial sesame producing provinces, Khuzestan and Fars. Materials and Methods The experiment was conducted in the Khuzestan (Dezful) and Fars (Darab) Agricultural and Natural Resources Research Center fields during 2019 and 2020. A split-block randomized complete block design with three replications was implemented at each location to investigate the effects of 30, 45, and 60 cm row spacing and 5, 8, 11, and 14 cm plant spacing on yield and yield components of shattering tolerant sesame genotypes. The collected data were analyzed using SAS software (version 9.4), and Bartlett's test confirmed homogeneity in the variance of all studied traits. The mean values for both years were presented since the data were consistent. It is important to note that the data from each region were analyzed separately due to inconsistent variances between regions. Statistical significance was determined using an F-test, and protected LSD was used to separate the main effects when necessary. Furthermore, significant interaction effects were separated using the slicing method. Results and Discussion The experiment results indicate that reducing the distance between rows and plants increased plant height in both locations. In Darab, increasing the row distance from 30 to 45 cm increased grain yield by 6%, while a further increase in distance to 60 cm decreased grain yield. The highest seed yield of 659 kg per hectare was obtained in Darab using a planting arrangement of 45x5 cm, and the lowest yield was observed with a 21% decrease in yield for the planting arrangement of 60x14 cm. In Dezful, the maximum seed yield of 684 kg per hectare was obtained with a planting arrangement of 45x11 cm. The study results showed that in both locations, the highest grain yields were achieved with a row distance of 45 cm, and the commonly used row distance of 60 cm did not produce the highest yield in either location. Additionally, in Darab, increasing planting density by up to 42 plants per square meter increased seed yield. In Dezful, the maximum seed yield was obtained at a density of 38 plants per square meter. Conclusion This research suggests that reducing the row distance while maintaining appropriate plant spacing can be a practical approach to achieving high sesame yields. Moreover, increasing plant density can lead to a certain extent of increase in grain yield. However, beyond a certain threshold, as the density further increases, yield decreases due to increased competition among plants. Thus, optimizing planting arrangements, including row and plant spacing, is essential to achieve maximum yields in sesame cultivation.

Assistant Professor Seed and Plant Improvement Institute, Agricultural Research, Education and Extension Organization (AREEO), Karaj, Iran

Majid Gholamhoseini; Amirkhosro Danaie; Abbas Fallah toosi

Volume 45, Issue 4 , February 2023, , Pages 575-587

https://doi.org/10.22055/ppd.2022.40492.2023

Abstract

Introduction Sesame (Sesamum indicum. L) belongs to the Pedaliaceae family and is an annual and thermophilic plant known as the queen of oilseeds. Sesame is compatible with the climatic ... Read More Introduction Sesame (Sesamum indicum. L) belongs to the Pedaliaceae family and is an annual and thermophilic plant known as the queen of oilseeds. Sesame is compatible with the climatic conditions of Iran, and due to its unique characteristics, it is possible to cultivate it second after wheat in arid and semi-arid regions. To utilize the maximum production capacity of sesame, implementing the proper agronomic practices such as plant density, optimal planting arrangement and selecting the appropriate genotype is inevitable. Materials and Methods To investigate the effect of planting arrangement and planting density on grain yield of two sesame genotypes, a factorial experiment based on a randomized complete block design with three replications was carried out in a hot and dry region situated in Behbahan (30° 36’ N; 50° 14’ E) in 2017 and 2018. The region is characterized as arid, and the average yearly precipitation (over a 30-yr period), which occurs mostly during the autumn and winter months, is 345 mm for the site. The annual mean temperature is 24 °C. The average temperature in 2017 was similar to the long-term meteorological data trend, while in 2017, the average temperature (22 °C) was lower. In this experiment, three factors included planting arrangement (cultivation of one and two rows on the ridge), planting density per unit area (including 20, 30 and 40 plants per square meter) and sesame genotypes Behbahan (local name) and Shavin cultivar were investigated. Data were subjected to ANOVA using SAS software (9.4 version). Because Bartlett’s test revealed homogeneity in the variance of all studied traits, data were presented as the mean values for both years. When an F-test showed statistical significance at, the protected LSD was used to separate the main effects, and the significant interaction effects were separated by the slicing method. Results and Discussion The results of grain yield, as the most important trait, indicated that in single-row cultivation, the maximum yield of the Behbahan genotype (1068 kg ha-1) was obtained at a density of 20 plants per square meter. An increase in planting density caused a significant reduction in grain yield when Behbahan genotype was sown as single-row arrangement. In two-row cultivation, the Behbahan genotype responded positively to an increase in plant density and an increase in planting density was associated with a significant increase in grain yield. However, the maximum grain yield obtained in two-row cultivation with a density of 40 plants per square meter (919 kg ha-1) was 16% lower compared to the superior treatment (single-row cultivation with a density of 20 plants per square meter). In the Shavin cultivar, the maximum grain yield was obtained in single-row (683 kg ha-1) and two-row (610 kg ha-1) arrangements at densities of 40 and 20 plants per square meter. The results showed that the average grain yield of the Behbahan genotype (851 kg ha-1) was significantly higher than the Shavin cultivar (561 kg ha-1). Conclusion Overall, in the Behbahan region and for the local genotype of Behbahan, as the superior genotype, a single-row arrangement and plant density of 20 plants per square meter is recommended.

Investigation on Some Physiological Traits of Tritipyrum Lines in Response to Salinity Stress

Fatemeh Razeghi Jahromi; Mohammad Esmailpour; Hossein Shahsavand Hassani

Volume 45, Issue 3 , December 2022, , Pages 409-420

https://doi.org/10.22055/ppd.2022.41353.2047

Abstract

IntroductionSoil salinity is one of the largest global challenges especially in the arid and semi-arid regions. It adversely and severely affected agricultural production and consequently ... Read More IntroductionSoil salinity is one of the largest global challenges especially in the arid and semi-arid regions. It adversely and severely affected agricultural production and consequently food security. The new cereal, tritipyrum, is an artificial hexaploeid wheat (2n=6x=42, AABBEbEb) derived from crossing between Triticum durum (2n=4x=28, AABB) and Thinopyrum bessarabicum (2n=2x=14, EbEb) species that has good potential to be used as a seed or forage plant. The aim of present research was evaluating saline tolerance of new primary different tritipyrum lines through assessing some agronomical traits and ion distribution in plant under mild and severe salinity stress conditions. Materials and MethodsA split-plot hydroponic experiment based on completely randomized block design with two factors and three replications was carried out at Shahrekord University in 2020. The NaCl salinity stress was considered as the main factor with 3 levels (0, 100, 200 Mm) and the genotypes were considered as sub plots with 8 levels. Genotypes included three primary tritipyrum lines (Ka/b, La/b, St/b), three combined tritipyrum lines (i.e. F4, F5 and F6 generations of a combined (Ka/b) (Cr/b) lines), as well as one durum wheat (cv. Creso) and a promising triticale line (Ma45). Different salinity stress levels were imposed from three leaf stage till maturity via irrigating the plants by appropriate saline water. The leaf surface area, fertile florets per spike, 1000-grain weight, grain yield, biological yield as well as concentration of Na+ and K+ and Ca++ ions in both root and aerial parts of genotypes were measured. Results and DiscussionThere were significant differences between genotypes in the case of all measured traits. Regardless of salinity levels, tritipyrum line (ka/b) (cr/b) (F6) had the highest amount of biological yield, grain yield, concentration of K+ and Ca++ and K+/Na+ ratio in shoot and the least amount of Na+ in shoot. With increase in salinity level from 0 to 200 mM, flag leaf area, number of fertile florets, 1000 grain weight, biological yield, grain yield and amount of K+ and Ca++ in both root and shoot were significantly reduced in almost all genotypes and concentration of Na+ was increased. At 200 mM salinity, all of the three combined tritipyrum lines had significantly higher amount of biological yield and K+ concentration in shoot and less amount of Na+ in shoot than durum wheat and triticale. Shoot Na+ concentration had negative significant correlation with flag leaf area and 1000 grain weight. In the other hand, positive correlation was observed between shoot K+ concentration and flag leaf area, number of fertile florets, 1000 grain weight and grain yield. At 200 mM salinity, the highest and lowest shoot K+/Na+ ratio were observed in tritipyrum line F5 and durum wheat, respectively. On average, root sodium concentration in tritipyrum lines was higher than that of wheat and triticale while shoot sodium concentration in tritipyrum lines was less than that of the two other genotypes. ConclusionResults of our experiment suggest that hindrance in the transfer of Na+ from root to the aerial parts is probably one of the mechanisms that used by tritipyrum lines to cope with the high NaCl concentrations.

Identification of different drought patterns of dryland wheat in the northwest of Iran by APSIM model

Sajjad Rahimi-Moghaddam; Hamed Eyni-Nargeseh

Volume 45, Issue 3 , December 2022, , Pages 435-446

https://doi.org/10.22055/ppd.2022.40869.2036

Abstract

IntroductionImproving crop yields can meet the projected demand in developed and developing countries as a key and promising solution. To increase dryland wheat production in arid and ... Read More IntroductionImproving crop yields can meet the projected demand in developed and developing countries as a key and promising solution. To increase dryland wheat production in arid and semi-arid regions such as Iran, researchers and crop breeders need to understand the drought pattern (in terms of time and intensity) occurring in wheat agro-systems because depending on the time and intensity of drought stress, drought stress impacts on different processes and genes of crops. To accurately study the drought pattern of dryland wheat and different cultivars adapted to these conditions, researchers need to design multi-environmental field experiments, which are time-consuming and costly. Under these circumstances, some essential information is limited in the field experiments, especially when done for only a few years, and basically does not indicate fluctuations in the target environments. In contrast, the modeling and simulation approach is a useful method for comprehensive environmental impact assessment. Materials and MethodsThis study was conducted to identify and study different drought patterns in 8 locations including Ardebil, Khalkhal, Maragheh, Marand, Meshginshahr, Sarab, Tabriz, and Urmia in the northwest of Iran. APSIM model was used to simulate the growth and development of dryland wheat in the study locations. The long-term climatic included minimum and maximum temperatures, rainfall, and radiation (1980 to 2016) collected from the Meteorological Organization of Iran. These data were used as input to the crop growth simulation model. Water supply and demand index was used to determine different drought patterns. This index is obtained by dividing soil water content to plant water demand (WSDR). After calculating the water supply and demand index for each year and region, the CLARA clustering method was used to classify and group the index. The number of groups obtained by CLARA method was equal to the type of drought patterns of dryland wheat. Results and DiscussionThe results showed 4 different drought patterns during the dryland wheat growing season in the study locations. Drought pattern 1 showed no drought stress or mild drought stress throughout the growing season of dryland wheat. Under drought pattern 2, drought stress started before flowering and ended during seed filling. For drought pattern 3, water stress started from the time of germination but removed during the vegetative growth period. Drought pattern 4 started in the early stages of growth and continued until the end of the dryland wheat growing season. The frequency of occurrence of 1, 2, 3, and 4 drought patterns was 27.8%, 26%, 8% and 38.2%, respectively. On average across locations, transpiration was 160, 137.1, 31, and 86.7 mm for 1, 2, 3, and 4 drought patterns during the wheat growing season. Also, a significant difference was observed among different drought patterns in terms of biomass that biomass under drought patterns 1, 2, 3, and 4 was equal to 13411, 10076, 2097 and, 6435 kg ha-1, respectively. Grain yield under drought pattern types 1, 2, 3 and 4 were 3738.7, 2949.7, 694.6, and 1456.2 kg ha-1, respectively. The highest percentage of light and mild drought patterns (1 and 2) was related to Marand region with 100% and Sarab region experienced more severe drought patterns (3 and 4) than other regions (88.2%). Under different locations and drought patterns, on average across years, the highest grain yield was simulated for Marand under drought pattern 1 (4759 kg ha-1) and the lowest was recorded for Urmia under drought pattern 3 (208.8 kg ha-1). ConclusionIn general, the simulation results showed that 4 different types of drought patterns were observed during the dryland wheat growing period in the study locations. The frequency of occurrence of 4 drought patterns was various in the study locations and the grain yield varied under the drought patterns. However, the highest occurrence was related to drought pattern 4, under which drought stress begun in the early stages of growth and lasted until the end of the dryland wheat growing season. Accordingly, it is suggested to consider various strategies such as using cultivars with short maturity period to avoid drought stress at the end of the season and using cultivars with high resistance to drought stress (especially in the flowering period).

Study of Soybean (Glycine max (L) Merrill) and Chia (Salvia hispanica L.) Competition in the Different Intercropping Ratios Based on Replacement Method

Rahmat Abbasi; Meisam Namdari

Volume 45, Issue 1 , May 2022, , Pages 1-14

https://doi.org/10.22055/ppd.2022.37720.1986

Abstract

IntroductionToday, efficient agricultural systems such as intercropping are essential due to the optimal use of resources. Meanwhile, using the Legume plant in intercropping can increase ... Read More IntroductionToday, efficient agricultural systems such as intercropping are essential due to the optimal use of resources. Meanwhile, using the Legume plant in intercropping can increase the efficiency of biological nitrogen fixation and be a sustainable approach to meet the crop's nitrogen needs. Since the planting pattern and component crop greatly influence this biological process, selecting complementary species in intercropping can play an essential role in increasing flexibility and sustainability in farming systems. Materials and MethodsIn order to study the effects of intercropping culture on the agronomic traits of Chia and Soybean, a field experiment was conducted in a randomized complete block design with four replications at the research farm of Sari Agricultural Science and Natural Resources University in 2019. The planting ratios were 0:100, 25:75, 50:50, 75:25, and 100:0 (Soybean: Chia respectively) using replacement method. Results and DiscussionResults showed that intercropping significantly affected shoot height, No. branch, grain yield, components yield, and the N. derived from the atmosphere (Ndfa). In the Chia, reducing the number of planting rows in different planting ratios, shoot height, and 1000-seed weight increased in contrast to the number of inflorescences per plant. Different planting ratios had no significant effect on the number of branches per plant of Chia. The soybean crop had the highest no. of branches, the number of pods per plant, and the 1000 seed weight in the 25:75 planting ratio. The highest shoot height was related to the monoculture soybean (100:0), and with decreasing the number of soybean planting rows in intercropping, the shoot height decreased. Also, the Ndfa in intercropping culture was higher than in monoculture during different growth stages. Its amount increased with a decreasing share of soybean planting in intercropping. Biological nitrogen fixation in soybean intercropping cultivation with Chia increased 75 days after planting and then decreased. Besides, the pure stand of Soybean (100: 0) and Chia (0: 100) had the highest and lowest grain yield with an average of 4629.57 and 823.14 kg. ha-1, respectively. Considering the total yield of Chia and Soybean in intercropping cultivation and the compensatory ability to increase the yield of Soybean against the decrease in the yield of Chia, the effect of competition between the two crops is positive complementation. lculation of land equivalent ratio (LER) revealed that the planting ratio of 25:75 had the highest efficiency by 22 percent. ConclusionChia in intercropping can improve the yield components of Soybean while improving the efficiency of biological nitrogen fixation. Increasing the efficiency of intercropping cultivation in the planting ratio of 25:75 due to the increase of 75.37% is the share of the complementarity effect on grain yield, creating balance and facilitating inter-species competition.

Effect of Waterlogging Stress on Yield and Yield Components and Photosynthetic Characteristics of Two Mung Bean Cultivars in Ahvaz Conditions

Seyed Bashir Fazeli; Afrasyab Rahnama; Payman Hassibi

Volume 45, Issue 1 , May 2022, , Pages 95-108

https://doi.org/10.22055/ppd.2020.30538.1805

Abstract

IntroductionMung bean (Vigna radiata L.) is one of the most important legumes in the world. This nitrogen-stabilizing plant has rapid growth and a short growth period, leading to improved ... Read More IntroductionMung bean (Vigna radiata L.) is one of the most important legumes in the world. This nitrogen-stabilizing plant has rapid growth and a short growth period, leading to improved soil fertility. Mung bean is widely cultivated in tropical and subtropical regions of Asia due to its high adaptation range. Plants are obligate aerobic organisms and thus depend on O2 to grow and compete successfully with neighbouring plants in natural environments. Waterlogging stress is one of the most important factors limiting the planting of mung bean under Ahvaz conditions. Materials and MethodsIn order to study the effects of waterlogging stress on some agronomic and physiological characteristics of two Mung bean cultivars, a pot experiment was conducted as split factorial in a completely randomized block design with three replications in the field. The main plots were different growth stages consisted of vegetative growth stage, the beginning of flowering, grain filling stage, and three growth stages. The combination of stress levels (control and waterlogging stress) and two Mung bean cultivars (Hindi and Omrani) were as subplots. Results and DiscussionWaterlogging was caused to decrease significantly dry matter and grain yield in both cultivars at each growth stages, In Hindi cultivar, the highest grain yield reduction was observed at flowering stage and the least difference was observed in waterlogging stress at all three growth stages. In Omrani cultivar, the highest grain yield reduction was observed in waterlogging stress at all three growth stages, and the least grain yield decrease at flowering stage. Overall, the reductions in dry weight and grain yield were higher in Omrani than Hindi cultivar at three growth stages. Therefore, in stress-prone areas such as Ahvaz where summer plants such as Mung bean are exposed to waterlogging stress at different growth stages, Hindi cultivar is suggested for cultivation. Waterlogging stress did not show a significant effect on grain weight and grain number per pod, but significantly reduced the number of pods per plant. The number of pods per plant was significantly more important in determining yield and had a positive and significant correlation (r = 0.846 **) with grain yield. The reason of difference between two cultivars was the better physiological compatibility of Hindi cultivar under stress conditions, including higher levels of photosynthesis and photosynthetic pigments contents. When plants were treated only with waterlogging stress in one growth stage, the Omrani cultivar could compensate some damages due to its indeterminate growth and phenological flexibility, as the period of pod formation was longer in this cultivar. SPAD value had the highest correlation with grain yield (r=0.707**) compared to other photosynthesis-related traits and could be used as a marker trait for selection of tolerant cultivars because of its ease, speed, cheapness and the possibility to measure this trait in the field. ConclusionThe results indicated that mung bean yield decrease in response to waterlogging stress, depending on growth stages, and experimental duration. The reductions in grain yield was impacted by the growth stage subjected to waterlogging stress. Moreover, the Hindi cultivar seems to be more tolerant to waterlogging in Khuzestan region

Influence of Sowing Date and Terminal Heat Stress on Phonological Features and Yield Components of Bread Wheat Genotypes

Fatemeh Mousavi; Mohammad Reza Siahpoosh; Karim Sorkheh

Volume 44, Issue 2 , August 2021, , Pages 157-170

https://doi.org/10.22055/ppd.2019.28957.1744

Abstract

AbstractIntroductionDelay in sowing date results in yield production change in wheat. Belated sowing time of wheat cultivars always encounters terminal heat stress, particularly after ... Read More AbstractIntroductionDelay in sowing date results in yield production change in wheat. Belated sowing time of wheat cultivars always encounters terminal heat stress, particularly after flowering, in south of Iran. Heat stress is one of the main obstacles influencing crop production worldwide. Currently, producing heat tolerant genotypes is so essential in plant breeding programs. In spite of previous research on physiological aspects of heat stress tolerance, a consensus among scientists on the most important traits controling heat stress tolerance in plants is not available. Phenological traits of wheat genotypes are the major traits influencing heat tolerance and very important in breeding programs. Materials and MethodsIn order to investigate the effects of sowing date and terminal heat stress on phenological traits, yield and yield components of bread wheat, a field experiment was conducted in a randomized complete block design with three replications on 30 genotypes including: Pars, Bahar, Sistan, Dez, Shiraz, Bam, Arvand, Chamran 2, Kavir, Neyshabour, Roshan, Pishtaz, Hamoon, Kaz, Arta, Sepahan, Mehregan, Shuosh, Verinak, Arg, Ghods, Hirmand, Chamran, Alvand, Falat, Aflack, Marvdasht, Mantana, Babax and Weebile with different length of phonological stages in experimental fields of Shahid Chamran University of Ahvaz during 2014-2015. The cultivars were planted in normal and late sowing dates (terminal heat stress) and the data were combined and run in a combined analysis of variance. Results and DiscussionIn this research, sowing date and consequent heat stress significantly reduced (P≤0.01) the phenological traits. The average of the number of days from sowing to tillage was reduced by 23% under terminal heat stress in comparison with the normal condition. The yield and yield components were also strongly affected by seasonal heat stress and the number of spikelets per spike (16%), number of kernels per spike (18%), thousands kernel weight (11%), biological yield (40%), harvest index (14%) and grain yield (46%) reduced under heat stress. Based on the results, the correlation between phenological traits and yield components was positive in normal conditions and in most cases it was negative under heat stress conditions. The reults of canonical correlation showed that phenological traits in the first canonical correlation could interprete 38% of the variance of yield components in the normal and 47% in the heat stress conditions, which shows the more effective role of phenological traits on yield components under heat stress than normal conditions. Cluster analysis also displayed the important role of phonological features in comparison with other traits in the classification of commercial wheat cultivars of Iran. Generally, under hot climatical conditions such as Khuzestan the length of different phonological stages over the course of plant life significantly influence the grain performance. If the phenology of genotypes is locally engineered based on the optimum length, the promising heat tolerant cultivars will be achieved with ability to produce and maintaine the yield production. ConclusionGenerally, under hot climatical conditions such as Khuzestan the length of different phonological stages over the course of plant life significantly influence the grain performance. If the phenology of genotypes is locally engineered based on the optimum length, the promising heat tolerant cultivars will be achieved with the potential to produce and maintaine the yield production.

Assessment of the Role of Low Irrigation and Change in Plant Density on Water Use Efficiency and Yield and Yield Components of Maize (S.C 704)

Haleh Badvan; Mojtaba Alavi Fazel

Volume 44, Issue 2 , August 2021, , Pages 271-282

https://doi.org/10.22055/ppd.2020.30499.1797

Abstract

AbstractIntroductionWater is the first and the most important limitation in increasing agricultural production. Topical root dryness is a new method of low irrigation, which improves ... Read More AbstractIntroductionWater is the first and the most important limitation in increasing agricultural production. Topical root dryness is a new method of low irrigation, which improves the water utilization efficiency, without significantly reducing the yield of the plant. Maize is a plant that is very sensitive to plant densities, and if the density is low, then the factors of exploitation are not optimized. On the other hand, excessive plant density causes flower sterility and reduced grain yield. Therefore, this experiment aims to investigate the role of low irrigation and plant density changes on the water use efficiency and grain yield components of corn. Materials and MethodsThe experiment design was implemented as a split plot design in a randomized complete block design with three replications. The main plots Include: 1- full furrow irrigation (control), 2- furrow irrigation in the form of a fixed and 3-variable furrow irrigation. Sub plots include different planting densities: 65,000, 75,000, and 85,000 plants per hectare. Results and DiscussionThe results showed that different low irrigation methods had significant effects on ear tick length, number of seeds per ear, 1000 grain weight, grain yield, biological yield, harvest index and water use efficiency. Differences among plant densities in terms of ear tick length, number of seeds per ear, 1000 grain weight, grain yield, biological yield and water use efficiency were significant. The highest grain yield was observed in full irrigation (6858 kg ha-1) and at a density of 85,000 plants per hectare (6159 kg ha-1). The highest water consumption efficiency was obtained in irrigation as variables (17.33%) and at 85,000 plants per hectare (15.52%). Single plant yield decreased at 85 thousand plants, but this deficit was compensated by increasing plant number per unit area and grain yield increased. Single plant yield increased by 65 thousand plants. But because of the less plant per unit area, its yield decreased. Grain yield increased by about 14% in irrigation of one side of the variable compared with one in the constant. Changes in performance components are expected to trigger these changes. With increasing plant density per unit area, water use efficiency also increased, which is due to more cover and less shade and evaporation from the ground. Plant density per unit area also affects water use efficiency by reducing evaporation and increasing the share of transpiration that results in high yield. Water use efficiency in treatments with intermittent furrow irrigation was higher than constant furrow irrigation. ConclusionThe full furrow irrigation (control) method was able to obtain the highest yield and grain yield components. As a result, in one irrigation in between fixed and variable, 25 and 12% reduction in yield was observed compared to full irrigation, respectively.

The Evaluation of the Elite Genotypes for Drought Tolerance in Cumin (Cuminum Cyminum L.) Using Drought Tolerance Indices

Maryam Dorrani-Nejad; Sonia Aghighi; Ghasem Mohammadi-Nejad

Volume 42, Issue 2 , June 2019, , Pages 227-238

https://doi.org/10.22055/ppd.2019.24247.1539

Abstract

Abstract Background and Objectives Cumin (Cuminum cyminum L.) is one of the most important aromatic and medicinal plants in the world. It has a short life cycle (100-120 days) ... Read More Abstract Background and Objectives Cumin (Cuminum cyminum L.) is one of the most important aromatic and medicinal plants in the world. It has a short life cycle (100-120 days) and needs little water for its growth cycle. Therefore, it is suitable for cultivation in arid and semi-arid regions of Iran. Different indices, including tolerance (TOL), mean productivity (MP), geometric mean productivity (GMP), stress tolerance index (STI), stress susceptibility index (SSI), harmonic mean (HM), yield index (YI), and yield stability index (YSI) have been employed for screening the stress tolerant genotypes. Due to the economic, medicinal, and aromatic importance of cumin, this study evaluated elite genotypes for drought tolerance in cumin in order to develop improved genetic population for farmers’ usage. Materials and Methods The experiment was carried out in the research field of Shahid Bahonar University of Kerman, during the growing season of 2016-2017. In this study, 15 elite genotypes in cumin were evaluated using a randomized complete block design with three replications in two different environments, including normal and stress conditions. Stress treatment was cutting-off irrigation at the early flowering stage. Seed yield (ton/ha) was measured. Tolerance indices were calculated for genotypes based on the seed yield. To find suitable indices in order to determine the tolerant genotypes, the correlation coefficient between the calculated indices YP and YS was performed. To evaluate the relationship between the tolerance indices and the studied genotypes, principal components analysis (PCA) was performed. In order to use all tolerance indices simultaneously, an equation was used for estimating the stress tolerance score (STS). Results The results of the correlation analysis revealed that GMP, MP, and STI indices were positively correlated with seed yield under both stress and non-stress conditions. Therefore, they can be suitable indices for determining tolerant genotypes. Principal components analysis (PCA) showed that the first and second Principal component explained 61.89% and 37.52% of the total variation, respectively. According to the bi-plot graph, genotypes No. 7, 12, 8, and 13 with high MP, GMP, and STI scores and low TOL and SSI scores had the highest tolerance to drought stress. Based on the calculated STS (stress tolerance score), genotypes No. 7, 4, 12, 8, and 13 were the most tolerant genotypes and genotypes No. 14, 10, 6, 9, and 2 were the most sensitive genotypes, respectively. These results were identical with the results of bi-plot analysis. Moreover, this equation is much easier to be used than the multivariate analysis, such as principal components analysis (PCA). Discussion The aim of this study was the evaluation and selection of tolerant genotypes with high seed yield, and based on the results obtained from all the applied methods, it can be concluded that genotypes No. 7, 4, 12, 8, and 13 are identified as tolerant genotypes and were recommended to develop improved genetic population after being-tested in other places.

Response of New Genotypes of Rapeseed (Brassica napus) to Late Season Withholding Irrigation under Semi-Arid Climate

Hamed Eyni Nargeseh; Majid AghaAlikhani; Amir Hosein Shirani Rad; Ali Mokhtasi-Bidgoli; Seyed Ali Mohammad Modares Sanavy

Volume 41, Issue 4 , March 2019, , Pages 55-68

https://doi.org/10.22055/ppd.2018.22672.1491

Abstract

Abstract Background and Objectives Water deficit stress is one of the most important environmental stresses which affect the crop production. Genetic improvement or application ... Read More Abstract Background and Objectives Water deficit stress is one of the most important environmental stresses which affect the crop production. Genetic improvement or application of drought tolerant genotypes is recommended to increase crop production under water restricted conditions. The objective of the current study is investigating the withholding irrigation effect in terminal stages of the growing season on agronomic performance of rapeseed new genotypes in a semi-arid climate. Materials and Methods The experiment was conducted during 2015-2016 growing season in Karaj, Iran. Experimental factors (two water irrigation regimes and 17 rapeseed genotypes) were investigated with factorial arrangement of treatments based on a randomized complete block design (RCBD) with three replications. In this study, several different traits including plant height, number of siliqueper plant, number of grain per silique, 1000-grain weight, grain yield, biomass, oil percentage and oil yield were measured. To determine the most tolerant genotypes, stress tolerance indices (SSI, TOL, STI and GMP) were calculated under stress (withholding irrigation from silique setting stage until the end of the growing season) and non-stress (normal irrigation) conditions. Also, agronomic water use efficiency (WUEagr) was calculated for both irrigation conditions. Results Mean comparison of the interaction between withholding irrigation and genotypes showed that the responses of genotypes were different in terms of plant height, number of siliqueper plant, number of grain per silique, 1000-grain weight, grain yield, biomass, and oil yield at irrigation different treatments. Finally under withholding irrigation treatment from silique setting stage until the end of the growing season, Lauren hybrid was identified as the superior genotype due to suitable agronomic traits such as plant height (158.9 cm), number of siliqueper plant (158.6), number of grain per silique(18.6), 1000-grain weight (3.44 g), biomass (15471 kg.ha-1), grain yield (3854.3 kg.ha-1), oil percentage (43.33%) and oil yield (1668.3 kg.ha-1). Based on the stress tolerance indices among 17 rapeseed genotypes, the most tolerant genotypes were Lauren, Zorica, Alonso and Zlanta. Finally with considering to WUEagr (Kg.ha-1.mm-1), Zorica (0.92), Artist and Lauren genotypes (0.88) had the highest WUEagr under normal irrigation conditions, while Alonso (0.86), Lauren (0.84) and KL3721 (0.82) had the highest WUEagr under withholding irrigation conditions. Discussion Generally in this study, the amount of the studied traits was decreased under conditions of withholding irrigation compared to the full irrigation. Yield components such as silique number per plant, grain number per silique and 1000-grain weight could be considered as key traits affecting rapeseed grain yield under withholding irrigation.

Effects of Drought Stress on Enzymatic and Non- Enzymatic Antioxidants in Flag Leaf and Spikes of Tolerant and Sensitive Wheat Genotypes

P. Sharifi; N. Mohammadkhani

Volume 41, Issue 3 , December 2018, , Pages 37-50

https://doi.org/10.22055/ppd.2018.20256.1420

Abstract

Abstract Background and Objectives Drought stress is one of the main limiting factors in plant production in semiarid regions; this is due to its oxidative stress. Materials and Methods ... Read More

Effect of Plant Growth Promoting Rhizobacteria (PGPR) in Yield and Yield Components of Corn Hybrid (540) under Water Stress Condition

Seyed Mohamad Reza Ehteshami; mehdi Ramezani

Volume 39, Issue 3 , December 2016, , Pages 51-64

https://doi.org/10.22055/ppd.2016.12049

Abstract

Background and Objectives Maize is the most important grain crop that has great economic importance and is grown worldwide. The largest areas under maize in Iran are in the regions ... Read More Background and Objectives Maize is the most important grain crop that has great economic importance and is grown worldwide. The largest areas under maize in Iran are in the regions with semidry and dry climates. Bio-fertilizers differ from chemical and organic fertilizers in the sense that they are cultures of special bacteria which do not directly supply any nutrients to crops. The phenomena of fixation and precipitation of P in soil caused a low efficiency of soluble P fertilizers such as superphosphate. The studies on the application of biofertilizers as replacements or supplements to mineral nutrients in the crop production show economic and ecological justification of their broad practical application and commercialisation of biofertilizers. Given the importance of water and fertilizer in agriculture, research leading to improvements in water efficiency and the use of chemical fertilizers is essential. Material and Methods In order to investigate the effect of growth promoting bacteria and different levels of phosphorus chemical fertilizer on grain yield and yield components of corn hybrid (540) under humidity different regimes, an experiment was conducted as Line source based on a randomized complete block design with three replications in Agricultural Education Center of Shahid Naseri in Karaj during 2012 and 2013. Line source was applied to four levels of irrigation (not stress, mild stress, moderate stress, severe stress). Phosphorus factor was in five levels including the application of 100% triple super phosphate fertilizer and without biofertilizer, 75% recommended chemical fertilizers with biofertilizer, 50% recommended chemical fertilizers with biofertilizer, 25% recommended chemical fertilizers with biofertilizer, biofertilizer and without chemical fertilizers, too. Results The results of the experiment showed the significant effect of fertilizer treatments on all traits both in the first and second years. In comparison, the effect of different levels of phosphorus fertilizers was investigated by the application of 100% phosphorus fertilizer and without inoculation it had the highest grain yield under non-stress conditions, while with increasing of stress intensity, grain yield in 75% recommended chemical fertilizers with biofertilizer treatment under mild stress, moderate stress and severe stress conditions was 2.1%, 5.5% and 35.8 % higher than the same treatment in similar circumstances, respectively. Discussions The result of the experiment showed that the use of plant growth promoting bacteria with a good percentage of the phosphorus chemical fertilizer, while increasing the efficiency of chemical fertilizers and soil conservation, improved grain yield under water stress conditions. The positive effect of bio-fertilizer may also be due to optimum soil pH which facilities maximum utilization of applied micronutrients to crops. Also, use of Biosuper biofertilizer had positive effects on all traits.

Detection and Selection of Effective Traits on Grain Yield in Chickpea (Cicer arientinum L.) Under Normal Moisture Condition

S.S. Moosavi; M.R. Abdollahi; F. Ghanbari; H. Kanouni

Volume 39, Issue 1 , June 2016, , Pages 119-131

https://doi.org/10.22055/ppd.2016.12046

Abstract

Background and Objectives Inequality of increasing population and food will be worse as soon as possible, because the human population is expected to increase to over 8 billion ... Read More Background and Objectives Inequality of increasing population and food will be worse as soon as possible, because the human population is expected to increase to over 8 billion by the year 2020 (Ashraf and Harris, 2006). Therefore, plant breeding is a permanent and economic method to solving the problem. Detection of effective traits on grain yield is an efficient approach to increase crop production. Among agronomy crops, chickpea plays vary important role in human life. KHalighi et al. (2011) showed that grain yield had a significant correlation with pod number per plant, seed number per plant, harvest index and biomass. In another research (Fayyaz and Talebi, 2009), the traits of number of pod and number of seed per plant were proposed as the most important traits for yield increasing in chickpea. Yucel et al. (2006) suggested that seed number per plant and pod number per plant have maximum direct effect on grain yield. Stepwise regression showed that the traits of biomass, harvest index and 100-kernel weight had great effect on chickpea grain yield, so the traits explained the main part of yield variance (Mardi et al, 2003). Detection and identifying the most effective traits on chickpea grain yield was the main objective of the current research. Materials and methods The experiment was conducted based on randomized complete block design with three replications on 18 chickpea promising lines and two cultivars (as control) under normal moisture condition in 2011-2012. The experiment was conducted in agricultural and natural resources research center of Kurdestan, Iran. The traits of day to 50 percent flowering, day to 50 percent podding, day to maturity, relative water content, number of sub-branches, number of main branches, seed number per plant, pod number per plant, plant height, 100- kernel weight, grain yield, harvest index and biomass were measured. Correlation analysis, stepwise regression analysis, and path analysis were used for identifying the best genotypes and traits in the current experiment. Phenotypic coefficient variation, genotypic coefficient variation and broad sense heritability were estimated for all traits. Results The results showed that the traits of number of sub-branch per plant, number of pod per plant, number of main-branch per plant, seed number per plant, harvest index and biomass had the maximum, positive and significant correlation with grain yield, while the trait of day to 50% flowering had the maximum, negative and significant correlation with grain yield. Stepwise regression results indicated that the traits of number of sub-branch, biomass, harvest index and day to 50% flowering (with negative beta) were the most important effective traits on the mean of grain yield and explained 97.98% of yield variance. Path analysis results confirmed the obtained results. The path analysis results showed that the traits of number of sun-branch and biomass had the maximum positive direct effect on grain yield. 100-kerenl weight and plant height had the highest and lowest heritability respectively. The maximum genotypic coefficient of variance belongs to 100-kernel weight, number of sub and main branches respectively. Meanwhile, the trait of harvest index and biomass (by increasing the number of sub-branch) had the maximum indirect positive effect on yield. As a result, increasing the sub-branch number and decreasing of day to 50% flowering may be proposed as a useful strategy for yield increase under the current experiment condition. Discussion Grain yield is a quantitative trait with low broad sense heritability. Therefore, identifying the traits correlated with grain yield is a suitable strategy for improvement and indirect selection of grain yield. Stepwise regression and path analysis are an efficient and useful statistical approach for reaching were the above aim. According to results, the traits of number of sun-branch, number of main-branch and biomass recognized as the best suitable traits for indirect grain yield selection under normal moisture stress condition.

Evaluation of the effect of humic acid and vermicompost on yield and yield components of three wheat cultivars in tropical regions

Sh. Shahbazi; E. Fateh; A. Aynehband

Volume 38, Issue 2 , September 2015, , Pages 99-110

https://doi.org/10.22055/ppd.2015.11323

Abstract

In order to evaluate the effect of humic acid and vermicompost on yield and yield components of three wheat cultivars in tropical regions, an experiment was conducted in the research ... Read More

Investigating of grain growth and contribution of stem reserves in grain yield of barley (Hordeum vulgare L.) cultivars under terminal drought conditions.

M. Pureisa; M. Nabipour; M. Meskarbashee

Volume 38, Issue 1 , May 2015, , Pages 41-53

https://doi.org/10.22055/ppd.2015.11117

Abstract

The duration of grain filling period and the rate of this period determines final grain weight in barley. In this study, in order to investigate the effect of final drought stress on ... Read More

Effects of sowing patterns and density on grain yield and yield components of alfalfa (Medicago sativa L.) cv. Mesa-Sirsa in South Khozestan conditions

G.R. Abadouz; A. Rahnama; G. Fathi

Volume 36, Issue 3 , December 2013, , Pages 53-64

Abstract

In order to investigate the effect of row spacing and seeding rate on Mesa-Sirsa alfalfa cultivar, this experiment was carried out in the research farm of Khuzestan Agricultural Research ... Read More

Effect of water height on physiological and agronomical characteristics of rice cultivars in Ahvaz

A. Lotfi jala abadi; S.A. Siadat; G. Fathi; A. Ebdali; A. Gilani

Volume 36, Issue 3 , December 2013, , Pages 77-92

Abstract

In order to study the effect of plot water height on some agronomical and physiological characteristics of rice cultivars in Ahvaz, a field experiment was conducted experimental field ... Read More

The evaluation of water deficit effect on grain yield and physiological characteristics of three canola (Brassica napus L.) cultivars

S.M. Hoseini; P. Hassibi; B. Andarzian

Volume 36, Issue 1 , June 2013, , Pages 13-24

Abstract

To investigate water deficit stress influence on stem elongation, flowering stage and some physiological characters of three canola (Brassica napus) cultivars including total ... Read More To investigate water deficit stress influence on stem elongation, flowering stage and some physiological characters of three canola (Brassica napus) cultivars including total dry matter, grain yield, total soluble sugars and starch, proline and osmotic potential this study was carried out in the green house of Shahid Chamran University of Ahvaz in 2008-2009 growing season. The experiment was factorial based on complete randomized design arrangement in three replications. The first factor comprised cultivars (including Hyola 308, Hyola 401 and RGS003) and the second factor was water deficit stress including water deficit in the early stem elongation to early-flowering stage (D1), early-flowering stage to early sac appearance (D2), early stem elongation to early sac appearance (D3) and normal irrigation conditions (D4). The results showed that the lowest and the highest reduction in shoot dry matter and grain yield was measured in Hyola 401 and Hyola308, respectively. The lowest shoot dry matter was in Hyola 308 (from the early stem elongation to early sac emergence stages) (22 grams per plant) and the highest shoot dry matter was in Hyola 401 (74 grams per plant) in normal conditions. In the stress conditions, shoot dry matter in all cultivars decreased. The amount of reduction during the flowering stage was more than early stem elongation stage showing more sensitivity of flowering stage to the stem elongation stage in water deficit stress. The interaction of water stress and variety showed significant differences in total soluble sugar, starch, proline, osmotic potential (P≤ 0.01), shoots dry matter and grain yield (P≤ 0.05). Furthermore, in the stress conditions participation in osmotic regulation process and reduction of negative effects of water deficit stress increased the amount of the total soluble sugars and proline of leaves. The lowest leaf osmotic potential (-2.23 Mpa) and the highest osmotic potential (-1.65 Mpa) were determined in Hyola 401, and Hyola 308 for D3 and D4 respectively. Decrease (become more negative) of osmotic potential because of more tolerance of Hyola 401 to water deficit stress was also assessed. According to the results of this study, Hyola 401, RGS003 and Hyola 308 were assessed for tolerance, semi tolerance and susceptibility to water deficit stress respectively.

Yield of Assessraent Some Wheat Cultivars to Planting Date in Noorabad Mammasani

H. Faragee; A. Godarzi; H.R. Owliaiee; M. Azimi Gandomani

Volume 35, Issue 4 , March 2013, , Pages 29-42

Abstract

In order to determine the appropriate wheat sowing date in Mamasany, a field experiment was conducted in 2006-2007 as a factorial randomized complete block design with four replications. ... Read More

Investigation in to Different Sowing Dates and Fertilization Methods (chemical and organic) on Yield and Yield Components of Milk Thistle (Silybum marianum L.)

S A; E F; A A

Volume 35, Issue 1 , June 2012, , Pages 129-143

Abstract

In order to study the effects of different sowing dates and Fertilization methods on yield and yield components of milk thistle (Silybum marianum L.) a field experiment was conducted ... Read More

Volume 46 (2023)

Volume 45 (2022)

Volume 44 (2021)

Volume 43 (2020)

Volume 42 (2019)

Volume 41 (2018)

Volume 40 (2017)

Volume 39 (2016)

Volume 38 (2015)

Volume 37 (2014)

Volume 36 (2013)

Volume 35 (2012)

Volume 34 (2011)

Volume 33 (2010)

Volume 32 (2009)

Keywords = %D8%B9%D9%85%D9%84%DA%A9%D8%B1%D8%AF %D8%AF%D8%A7%D9%86%D9%87

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract