Plant Productions

Research Paper - Agroecology

Evaluating the effect of organic fertilizer in different crop densities on agromorphological characteristics and essential oil yield of Thymus daenensis Celak in rainfed conditions.

Hoshang Rahmati; Hooshmand Safari

Volume 47, Issue 3 , November 2024, Pages 323-336

https://doi.org/10.22055/ppd.2024.46887.2167

Abstract

IntroductionThyme, a plant with valuable metabolites, has been using in the food, pharmaceutical and health industries due to its medicinal properties. Identifying the agricultural ... Read More IntroductionThyme, a plant with valuable metabolites, has been using in the food, pharmaceutical and health industries due to its medicinal properties. Identifying the agricultural factors affecting the quantitative and qualitative changes of medicinal plants is crucial for increment quality and more production. The use of chemical fertilizers has been caused many environmental problems; therefore, it is important to use organic fertilizers in different density patterns of cultivation in order to reduce the consumption of chemical fertilizers to achieve sustainable agriculture. Materials and methodsThis research was carried out as a split-plot design in the form of a randomized complete block design with two factors and three replications in rainfed conditions in the Mahidasht research station of Kermanshah province during the two crop years 2020-2021 and 2021-2022. The main factor included three levels (20 tons per hectare Caw manure, enriched straw at the rate of 10 tons per hectare and no fertilizer application) along with agricultural soil without applying fertilizer, and the sub factor was three densities (4, 6 and 8 plants per square meter). The three plants were randomly selected from each plot, plant height (cm), number of branches per plant, and canopy diameter (cm) were measured. In the flowering stage, plants of one square meter were harvested from each plot and the wet and dry weights were measured in grams per square meter. Also, the dry weight of leaves and stems was measured in grams per plant for each plot, which, leaf to stem ratio was calculated for each plot by dividing leaf to stem weight. The essential oil of 20 grams of dried leaves were extracted using a Clevenger apparatus, and the percentage of essential oil was determined for each plot, and finally, according to the dry leaf yield per square meter, the amount of essential oil yield of aerial parts of the plant per square meter was calculated. Results and DiscussionAnalysis of variance showed that different fertilizers and different levels of density had a significant effect on all traits, but the interaction of fertilizer × density had a significant effect only on the traits of percentage and yield of essential oil. According to the mean comparison by Duncan's method, fertilizer increased the growth of thyme. All the vegetative characteristics of the plant were affected by the use of fertilizer. However, animal manure was the best among the two types of fertilizers used. On the other hand, with the increase in density, the plant height increased, but the number of branches in the plant and the canopy diameter showed a decreasing trend. in contrast to these two characteristics, the wet and dry yield of the plant was lower in low and high density than in medium density. A different trend was observed for the essential oil percentage and yield. The essential oil percentage increased by 17.53% by reducing the density from 8 plants to 4 plants. Interstingly, the yield of essential oil showed a decrease of 5.42%. The results of principal components analysis of the traits in different agricultural conditions showed that 94.3% of the variance was expressed based on the first two components, and the bi-plot of the two components confirmed the results of mean comparison. ConclusionAccording to the final goal of this research, which was to determine the best density, in terms of using manure and enriched straw to achieve the desired result in the cultivation of rainfed thyme, therefore, based on the grouping of the two-factor interaction and principal components analysis, it was observed that the use of manure at the rate of 20 tons per hectare with density cultivation of 6 plants per square meter is the most suitable treatment for the cultivation of thyme in the rainfed conditions of Kermanshah province. Therefore, it can be recommended for the cultivation of this species in the rainy conditions of Kermanshah province.

Research Paper - Horticulture

Efficacy of nitric oxide and zinc oxide nanoparticles in improving growth, nutrition, metabolism and reproductive development in tomato

Elham Danaee; Zahra Oraghi Ardebili

Volume 47, Issue 3 , November 2024, Pages 337-353

https://doi.org/10.22055/ppd.2024.46944.2170

Abstract

IntroductionThere is no doubt that significant progress is being made in nanoscience and technology, which has paved the way for advancements in many different fields such as agriculture, ... Read More IntroductionThere is no doubt that significant progress is being made in nanoscience and technology, which has paved the way for advancements in many different fields such as agriculture, biology, food, and medicine. Among the different types of nano-scaled metal oxides, zinc oxide nanoparticles (ZnONPs) are among the most widely employed nano-compounds in various industries, including agriculture, food, and medicine. Nitric oxide (NO) is a bioactive signaling substance in living organisms, including plants, which plays vital roles in different stages of plant development during the life cycle. Physiological responses of crop plants to long-term application of NO or ZnONPs individually and mixed manners have not been well investigated and remain largely unknown. The purpose of this research is to investigate the effect of long-term foliar application of NO or ZnONPs on the growth performance and physiology of tomato plants. Considering the necessity of developing a sustainable agricultural approach, this project was designed to evaluate the effect of long-term foliar application of NO or ZnONPs on the growth, performance, nutrition and metabolism of tomato. Materials and methodsThis study was implemented as a completely randomized design with four treatment groups and three independent replications. This experiment was conducted in soilless conditions (cocopeat and perlite) in a greenhouse (Islamic Azad University, Garmsar branch, Garmsar). Tomato seedlings was irrigated with Hoagland nutrient solution. 30-days-old tomato seedlings were sprayed with ZnO-NP at two concentrations (0 and 3 mg/L) or NO (0 and 25 μM) 15 times with an interval of 72 hours. Results and DiscussionThe results showed that NO and ZnONPs treatments, especially in the combined one, caused a significant increase in the biomass in shoot and root compared to the control. The applied treatments also affected the characteristics of the plants in the reproductive stage. The application of NO and ZnONPs treatments significantly reduced the time of entering into the reproductive phase, increased fruit production, and enhanced fruit biomass, which indicated the effectiveness of these treatments on plant reproductive development. Foliar spraying with NO and ZnONPs caused a significant improvement in the content of several essential minerals, including potassium (K+), iron (Fe) and zinc (Zn) in leaves and fruits, compared to the control group. The NO and ZnONPs treatments synergistically and significantly augmented in the concentrations of photosynthetic pigments, including chlorophyll a (Chl a), chlorophyll b (Chl b), and carotenoids in leaves in comparison to the control group. The highest amount of proline amino acid was observed in ZnONP and NO+ZnONP treatment groups, which was significantly higher than the control group. Single and combined treatments of seedlings with NO and ZnONPs led to a significant increase in the content of soluble phenols in leaves compared to the control group. Phenylalanine ammonialyase (PAL) enzyme activity also followed the same trend as soluble phenols. Also, the activity of antioxidant peroxidase enzyme showed a significant up-regulation in response to the application of NO or ZnONPs. The highest activity of nitrate reductase enzyme was recorded in the leaves of plants simultaneously supplemented with NO and ZnONPs. ConclusionThe results of this research indicated that foliar spraying with NO or ZnONPs at low concentration can lead to the promotion of plant growth and metabolism and also strengthening the plant's defense system, while reducing the risk of possible toxicity. These findings can be useful for designing future studies on nano-fertilizers or pesticides. This study also emphasizes the necessity of providing transcriptome and proteome data in future studies.

Research Paper - Biotic and Abiotic Stress

Effect of biological stimuli on Some Biochemical Characteristics of Fennel Plant under Cadmium Stress

Seyedeh Yalda Raeisi Sadati; Fereshteh Raeisi Sadati; Mir Reza Raeisi Sadati

Volume 47, Issue 3 , November 2024, Pages 355-372

https://doi.org/10.22055/ppd.2024.46447.2152

Abstract

Introduction With the industrialization of societies in recent days, many toxic compounds have been released into the environment. Environmental pollution caused by heavy metals is ... Read More Introduction With the industrialization of societies in recent days, many toxic compounds have been released into the environment. Environmental pollution caused by heavy metals is one of the most important global factors of soil pollution that threatens food security. Medicinal plants are important economic plants and their products are widely consumed in the world and Iran. Since cadmium is known as the main element in causing various cancers, especially digestive cancer, it is necessary and important to investigate the effects of this toxic metal on the quantitative and qualitative properties of fennel. Using nano fertilizers in soil and nutrients can be a suitable solution to reduce the adverse effects of this heavy metal. Materials and Methods This experiment was conducted in order to evaluate some biochemical characteristics of fennel plant and the possibility of mitigating the effects of cadmium heavy metal stress by foliar spraying of selenium nanoparticles, algae extract and their interaction in greenhouse conditions in a factorial manner based on a randomized complete block experimental design with three replications in 2023-2024 was implemented. The first factor included the heavy metal cadmium chloride at two levels (control and 20 mg/kg of soil) and the second factor is foliar application at three levels (control, algal extract, and selenium nanoparticle with concentrations of 2 mg/L and 20 mg/L). Results The findings showed that under cadmium stress, the amount of malondialdehyde, catalase and superoxide dismutase enzymes, proline content and ion leakage percentage increased significantly, while the content of photosynthetic pigments decreased compared to the control. Also, the highest level of malondialdehyde concentration and activity of catalase and superoxide dismutase enzymes were observed in foliar spraying with algal extract under cadmium stress compared to the control. The synergistic effect of selenium nanoparticle and algal extract decreased ion leakage by 3.91% and increased proline and photosynthetic pigments by 16.73%, especially chlorophyll b by 33.11%. In other words, the adverse effects of cadmium stress have been reduced by strengthening the antioxidant and photosynthetic system of fennel plant by selenium nanoparticles and algae extract. Conclusions In general, foliar application of algal extract (concentration of 2 mg/L) due to the high content of macro and micro elements and antioxidant properties compared to selenium nanoparticles, has been able to inhibit free radicals by increasing the activity of antioxidant enzymes and by reducing the electrolyte leakage, maintain the integrity of the membrane in the condition of cadmium stress.

Research Paper - Agronomy

Evaluation of wheat and rapeseed yield gap using boundary line analysis (BLA) in Khorramshahr

Hamid Matourian; Aydin Khodaei Joghan; Mohammad Reza Moradi Telavat; Seyed Ataollah Siadat; Benjamin Torabi

Volume 47, Issue 3 , November 2024, Pages 373-385

https://doi.org/10.22055/ppd.2023.43754.2101

Abstract

IntroductionFood security is one of the most important challenges facing humankind. Therefore improving crop yields are essential to meet the increasing pressure of global food demands. ... Read More IntroductionFood security is one of the most important challenges facing humankind. Therefore improving crop yields are essential to meet the increasing pressure of global food demands. The Decreasing the area of high-quality land, increasing fertilizer use, and its effect on the environment indicate that we need to develop new strategies to increase grain yields with less impact on the environment. One strategy that could help address this concern is by narrowing the yield gaps using improved management. Therefore, the present study was conducted in Khorramshahr region for recognition of best management practices, percentage of the affected fields, estimation of wheat and rapeseed yield potential and gaps using boundary line analysis.Materials and MethodsTo quantify the production and estimation of wheat and rapeseed yield gap in Khoramshahr, Farm management information of 60 wheat fields and 57 rapeseed fields in the years 2018-2019 were collected. The information was collected through continuous farm monitoring during the growing season as along with face to face interviews with the farmers. Farms were selected by consulting with agricultural service centers expert in Khorramshahr districts. Based on the available information at the agricultural service centers, only farms, which is different in terms of acreage, cultural practices and harvesting operations were selected. In this study, by plotting the distribution of the yield obtained in each field as the dependent variable against the independent variables (crop management activities), using SAS software and an appropriate function was fitted on the upper edge of the data distribution.Results and DiscussionUsing this boundary line analysis method, the average yield, attainable yield and yield gap of wheat were obtained as 3740, 5455 and 1715 kg per hectare respectively. The yield gap percentage in wheat was 31.5% and rapeseed was 48%, which indicates the high effectiveness of wheat and rapeseed in relation to the use of appropriate management methods. The analysis of the investigated data in wheat fields showed that in order to achieve the achievable yield, 258 kg per hectare of seeds, the use of Mehrgan variety, the planting date until October 24, the amount of 280 kg per hectare of nitrogen fertilizer, the consumption of at least 100 Phosphorus fertilizer per hectare was at least 6 kg with irrigation and consumption of at least 70 kg of potassium fertilizer. Also, according to the frontier line analysis, the average yield of rapeseed farmers is 1663 kg, they can achieve a yield of 3197 kg per hectare by improving crop management, and for this purpose, the following measures should be taken into account: 1) consuming a maximum of seven kilograms of seeds per hectare 2) Planting date up to 17 November 3) Use of at least 300 kg of nitrogen fertilizer 4) At least 42 kg of phosphorus fertilizer 5) Use of Hyola 50 variety.ConclusionIn this study by examining several important management factors in growing wheat and rapeseed, optimal requirements of each factor to achieve the highest yield was determined by borderline analysis. In addition, the percentage of farms that had poor management as well as wheat and rapeseed yield potential and gaps in Khorramshahr. Yield responses to management practices were evaluated and studied by means of borderline analysis. Best management practices could be devised using study findings to realize the highest yield potential..

Research Paper - Agronomy

Study of photosynthetic pigments, seed yield and oil compositions of camelina (Camelina sativa L.) under the influence of urea foliar application and irrigation regimes in Tehran

Kimia Momeni-Shijani; Seyed Ali Mohammad Modarres-Sanavy; Ali Heidarzadeh; Amir Mohammad Abedi

Volume 47, Issue 3 , November 2024, Pages 387-403

https://doi.org/10.22055/ppd.2024.46765.2161

Abstract

Introduction Oilseeds are rich in fatty acids, hence they are of paramount importance. Fats and oils are recognized as primary sources of energy in human nutrition. Additionally, fat-soluble ... Read More Introduction Oilseeds are rich in fatty acids, hence they are of paramount importance. Fats and oils are recognized as primary sources of energy in human nutrition. Additionally, fat-soluble vitamins, which play a crucial role in maintaining human health, are supplied through the consumption of oilseeds in the body. Therefore, studying and researching oilseeds and their importance in today's nutrition is crucial. Camelina is an oilseed product belonging to the Brassicaceae family, which can adapt well to various environments and produce suitable oil for biological purposes. Due to its appropriate composition of unsaturated fatty acids such as oleic acid (omega-9), linoleic acid (omega-6), alpha-linolenic acid (omega-3), and low levels of saturated fatty acids, it is considered one of the highest quality edible oils. Materials and Methods This research aimed to investigate the performance and composition of camelina oil under the influence of urea foliar application and irrigation regimes in a split plot arrangement in randomized complete block design with three replications during 2021 growing season at the research farm of the Faculty of Agriculture, Tarbiat Modares University. In this study, the examined factors included different irrigation regimes at the flowering stage at four levels defined as the main factor. These levels included optimal irrigation (no stress), mild water deficit stress, moderate water deficit stress, and severe water deficit stress. Irrigation continued until the plant's available moisture in the root zone reached 20, 40, 60, and 80 percent, respectively, and then irrigation continued to the field capacity. The secondary factor included the application of nitrogen fertilizer from urea source as foliar spray at six levels (0% (distilled water spray), 1%, 2%, 3%, 4%, and no foliar spray (control)). Results and Discussion Under optimal irrigation conditions, seed yield and oil content showed the highest values, with the optimal irrigation treatment exhibiting the highest yield. In mild water deficit stress conditions, seed yield decreased by 12.83% compared to the control (optimal irrigation), while foliar application of nitrogen at concentrations of 1%, 2%, 3%, and 4% increased seed yield by 18.23%, 27.95%, 16.30%, and 11.74%, respectively, compared to the control (no foliar spray). In mild water deficit stress conditions, the use of nitrogen foliar spray at a concentration of 3% resulted in a greater increase in grain yield and oil content compared to other concentrations. Oil yield decreased by 4.42% and 21.23% in mild and moderate water deficit stress conditions, respectively, compared to the control (optimal irrigation). Additionally, foliar application of urea at concentrations of 1%, 2%, and 3% increased oil yield by 23.85%, 35.37%, and 23.81%, respectively, compared to the control (no foliar spray). Under severe water deficit stress conditions, the treatment with 2% nitrogen concentration led to the highest amount of seed oil, chlorophyll a, and chlorophyll b. Regarding the anthocyanin content, under severe water deficit stress conditions, foliar application of nitrogen at a concentration of 1% resulted in a greater increase in anthocyanin content compared to other treatments. Conclusion In optimal irrigation conditions, grain yield and oil content showed the highest values. In mild water deficit stress conditions, the use of foliar spraying of urea fertilizer with a concentration of 3% nitrogen led to a greater increase in grain yield and oil content than other concentrations. In severe water deficit stress conditions, urea fertilizer treatment with 2% nitrogen concentration resulted in the highest amount of oil content and chlorophyll a and b.

Research Paper - Agronomy

Determining the optimal plant density in two types of soil with different physicochemical properties in manual and machine transplanting of rice (Oryza sativa L).

Ebrahim Rezaei; Morteza Sam Daliri; Hamid Reza Mobasser; Amir Abbas Mousavi Mirkolaei; Morteza Moballeghi

Volume 47, Issue 3 , November 2024, Pages 405-423

https://doi.org/10.22055/ppd.2024.47425.2191

Abstract

Introduction Rice (Oryza sativa L) is recognized as an important food product in the world. The survival of approximately 3 billion people depends on the production of this crop. Increasing ... Read More Introduction Rice (Oryza sativa L) is recognized as an important food product in the world. The survival of approximately 3 billion people depends on the production of this crop. Increasing yield and sustainable production of rice is necessary for food security in the world. The transplanting of rice seedlings in Iran is by machine and manual-traditional. Machine transplanting is a promising technology that is more efficient and requires less labor than traditional manual transplanting. Having little land and the poor financial status of farmers are among the shortcomings of adopting this technology. Rice production is determined mostly by the soil. Soil is one of the most important environmental factors and the main source of nutrients and water for the growth of plants. Decreasing soil quality will reduce rice production. Maintaining soil properties at the desired level is one of the important management issues. Determining the appropriate plant density is the most basic and critical consideration for high-yield rice planting. Because it can accelerate tillering in each plant, balance the variables and promote the harmonious growth of the plant and the plant community. By determining the optimal plant density, it is possible to achieve the maximum yield of the crop. The current study aims to determine the optimal plant density in two soils with different physicochemical properties in a region under manual and machine rice transplanting methods. Materials and Methods A split-split plot experiment was conducted based on a randomized complete block design with four replications in 2021 and 2022. The experimental site is located along the coast of the Caspian Sea (36°50′N, 52°83′E; 29 m asl) at the Faculty of Agriculture and Natural Resources of Qaemshahr Azad University, Mazandaran Province (Northern Iran). Physical and chemical properties of soil (first type soil and second type soil) as the main factor, planting method (manual and machine transplanting) as a sub-factor, and plant density (15.9, 20.8, and 27.8 plants m-2 with spaces of 30 × 21, 30 × 16, and 30 × 12 cm2, respectively) as a sub-sub-factor were studied. In the current experiment, phenological traits (the number of days from transplanting to the beginning of flowering and the beginning of flowering to maturity), root morphological characteristics (root length and root fresh weight in tillering, panicle initiation, and maturity stages), and other agronomical traits (panicle length, number of panicles m-2, total spikelet panicle-1, 1000 - grain weight, grain yield, straw yield and harvest index) were measured. Results and Discussion Results showed that in the panicle initiation stage, the maximum root length in 2022 was obtained at a density of 27.8 plants m-2 (23.9 cm). At the same stage, the maximum fresh weight of the root in 2022 was observed with the second type soil (66.2 g). In the maturity stage, the maximum root length was recorded with the second type of soil during manual transplanting (22.4 cm). At the same stage, the highest root fresh weight was observed with the second type of soil at a density of 15.9 plants m-2 (86.4 g). The highest number of panicles m-2 in the second type of soil was obtained, respectively, during machine transplanting with a density of 27.8 plants m-2 (554.6 panicles) and during manual transplanting with the same plant density (547.4 panicles). The maximum total number of spikelets panicle-1 was observed in the first type of soil during manual transplanting and the density of 27 plants m-2 (134.1 spikelets), which was due to the number of panicles m-2 (427.0 panicles). The minimum 1000- grain weight in 2021 was obtained with the first type of soil during manual transplanting (26.6 g). The grain yield in the second type soil was 8.7% higher than the first type soil. Also, the highest grain yield was observed at a density of 27.8 plants m-2 (8687 kg ha-1). Conclusion Based on the results obtained in the present study, the second type of soil and a density of 27.8 plants m-2 are separately suggested to achieve the highest grain yield.

Research Paper - Agronomy

Yield gap analysis of rice in Shoaybiyeh, Khuzestan: yield-reducing factors have the greatest contribution to grain yield reduction

Ghazban Anafjeh; Elham Elahifard; Abolfazl Derakhshan; Ahmad Zare

Volume 47, Issue 3 , November 2024, Pages 425-440

https://doi.org/10.22055/ppd.2024.46453.2153

Abstract

Introduction One of the main issues of crop production in Iran and many countries of the world is the difference between the farmers’ yields (actual yield) and the achievable ... Read More Introduction One of the main issues of crop production in Iran and many countries of the world is the difference between the farmers’ yields (actual yield) and the achievable yields (potential yield). This distance and yield difference is named the yield gap. Therefore, research was conducted with the aim of determining the rice yield gap in Shoaybiyeh region of Khuzestan province. Materials and Methods This research was conducted in 2020 growing season as a survey in 100 rice fields in Shoaybiyeh region of Shushtar county. Comparative performance analysis method was used to determine rice grain yield gap. The modeling of grain production in rice fields was done by examining the relationship between all the investigated variables with the grain yield observed in the fields using progressive stepwise regression method. The production model obtained with this method was able to justify 89% of the grain yield changes of the studied rice fields with the studied variables. Results and Discussion The results showed that there was a gap of about 1495 kg ha-1 between the average yield of farmers (5044.47 kg ha-1) and the achievable yields in the region (6902.61 kg ha-1). From this value of the expected yield gap in the region, the contribution of factors such as the age of the farmer, the intensity of the weed infestation in the fields, the presence of weed in the fields, the use of adjuvants during the spraying operation, the intensity of the infestation of the field with the striped rice stemborer, and the intensity of the infestation of the fields with the blast disease were equivalent to 3.29, 62.29, 2.53, 6.99, 20.22 and 4.68%, respectively. The analysis of rice yield gap showed that the weed infestation of the fields alone accounted for about 62.3% of the yield reduction compared to the achievable yields. In all the studied fields, the weeds of purple nutsedge, junglerice, broadleaf cattail, and johnsongrass were observed and recorded. Due to the lack of diversity in the fields, the model was not able to distinguish the amount of yield loss caused by these weeds. Intensity of weed contamination of rice fields was also observed in only 6% of the fields, and in the remaining 94%, moderate to very high contamination was observed. Some used herbicides such as bensulfuron-methyl and tribenuron-methyl showed a significant negative relationship with grain yields observed in rice fields. Therefore, it seems that farmers should reconsider the use of these herbicides in rice fields. Also, the delay in sowing and laxuary consumption of nitrogenous fertilizers was closely related to the severity of weed infestation and yield reduction. Investigating the relationship between the yields obtained in rice fields and the date of herbicide spraying (31 to 77 days after planting), a significant negative relationship was clearly observed; That is, with the delay in the spraying time and the consequent increase in the competitive ability of weeds, which may be associated with the decrease in the effectiveness of herbicides, yield have decreased linearly. Conclusion In general, among the variables that had a significant impact on the observed yields in the region, except for the age variable of the farmer, all of them were related to yield-reducing factors, including pests, diseases, and weeds. Based on the results, the yield reducing factors, explained about 90% of the yield gap observed in the region.

Research Paper - Medicinal Aromatic Plants

Effect of selenium, silicon and zeolite on yield and yield components and percentage of essential oil of fennel (Foeniculum vulgare Miller.) in Khosrowshahr region

Jalil Shafagh-Kolvanagh; Mohammad Bagher Tajkhalili; Ahmad Bybordi; Mina Amani

Volume 47, Issue 3 , November 2024, Pages 441-454

https://doi.org/10.22055/ppd.2024.44762.2122

Abstract

Introduction Studies have shown that the use of some compounds whose importance is often neglected by researchers and farmers can have a significant effect on the growth and yield ... Read More Introduction Studies have shown that the use of some compounds whose importance is often neglected by researchers and farmers can have a significant effect on the growth and yield of plants and increase the amount of essential oil production in medicinal plants. Therefore, this research was conducted with the aim of investigating the effects of Selenium and Silicon foliar application and zeolite soil application on the yield and components of seed yield and the percentage and yield essential oil of Fennel (Foeniculum vulgare Miller.). Materials and methods This experiment was carried out in the form of a split split plot (twice chopped) based on a randomized complete block design with three replications at the Khosrowshahr Agricultural and Natural Resources Research Center in the 2019 crop year. The first factor included foliar spraying of calcium (zero and 4 gr/L) and the second factor included foliar spraying of selenium (zero and 4 gr/L) in the main and secondary plots, respectively, and the third factor was the application of zeolite (zero, 5 and 10 tons/ha) were placed in sub-sub-plots. In the full ripening stage, plants were harvested from one square meter of each plot and the dry matter of the whole plant, number of seeds per umbels, number of seeds per plant, 1000-seed weight, seed yield, percentage and essential oil yield were measured. Results and Discussion The results showed that the seed yield increased with the application of these treatments, which resulted in an increase in the yield of fennel essential oil per unit area. Based on the results of the average data comparison, the use of all three compounds of zeolite, selenium and silicon caused a significant increase in the yield of fennel essential oil and increased this attribute by 24, 23.1, and 22.5 percent, respectively. Silicon and selenium increased the yield of essential oil by increasing the seed yield. In addition, zeolite had a positive effect on seed yield through the number of seeds, while silicon and selenium increased both characteristics of yield components, including 1000-seed weight and number of seeds. Conclusion Finally, the yield of fennel essential oil was affected by the use of zeolite, selenium and silicon. In most cases, all three compounds were effective on the evaluated traits, and therefore, it can be concluded that these three compounds were effective in increasing the yield and yield components of fennel with different mechanisms. Therefore, it can be concluded that these three compounds work through different mechanisms to enhance the yield and quality of fennel essential oil, positioning them as effective tools in sustainable agriculture and the optimization of medicinal plant production.

Research Paper - Medicinal Aromatic Plants

A study on the effects of chemical and biological fertilizers on the essential oil content of sage (Salvia officinalis L.)

Bohloul Abbaszadeh; Masoumeh Layegh haghighi; Razieh Azimi; Negar Valizadeh

Volume 47, Issue 3 , November 2024, Pages 455-474

https://doi.org/10.22055/ppd.2024.47372.2188

Abstract

Introduction The use of medicinal plants and their products has been expanded significantly in various countries. Sage, scientifically known as Salvia officinalis, is a valuable medicinal ... Read More Introduction The use of medicinal plants and their products has been expanded significantly in various countries. Sage, scientifically known as Salvia officinalis, is a valuable medicinal plant belonging to the mint family. Sage leaves contain various types of flavonoids and phenolic compounds and possess important medicinal properties such as antioxidant and anti-inflammatory activities. Additionally, sage leaves and flowering tops are used in food processing and perfumery. Some compounds present in sage essential oil, such as 1,8-cineole, borneol, camphor, and thujone, exhibit antimicrobial, antioxidant, memory-enhancing, anti-Alzheimer's, and anticancer properties. The application of biofertilizers not only plays a crucial role in increasing the yield of medicinal plants but also affects the quality of active compounds. One of the strategies in sustainable agricultural systems to enhance soil fertility is the minimal use of on-farm inputs, including biofertilizers, and their combined application with organic and chemical fertilizers. Furthermore, nutrient management is a vital factor in successful cultivation. Materials and methods A factorial experiment based on a randomized complete block design with three replications was conducted in the 2021-2022 growing season at the Research Farm of the Forest and Rangelands Research Institute of Iran to evaluate the effects of chemical and biological fertilizers on the percentage and composition of sage essential oil. Treatments included a control (no fertilizer), chemical fertilizers (150 kg/ha phosphorus from triple superphosphate and 300 kg/ha nitrogen from urea), and inoculation with mycorrhizal fungi (Funneliformis mosseae and Rhizophagus irregularis) and phosphate-solubilizing bacteria (Pseudomonas fluorescens strain 187). Results and Discussion Results showed that the application of chemical fertilizers significantly affected the yield and percentage of essential oil compounds including alpha-pinene, camphene, 1,8-cineole, alpha-thujone, and beta-thujone, as well as the total of hydrocarbon monoterpenes, oxygenated monoterpenes, and oxygenated sesquiterpenes. The yield of compounds such as alpha-pinene, 1,8-cineole, alpha-thujone, beta-thujone, and camphor was also significantly affected. The highest percentage of alpha-thujene (% 0.25) were obtained in the treatment with both urea and phosphate fertilizers. The highest percentage of linalool and camphor yield was obtained in the treatment with biofertilizers. The highest essential oil yield with averages of 97.57, 97.07, and 89.27 kg/ha belonged to the treatments N300P0 * Funneliformis mosseae + Rhizophagus irregularis+ Pseudomonas fluorescens strain 187, Pseudomonas fluorescens strain 187 * N0P150, and Funneliformis mosseae + Rhizophagus irregularis + Pseudomonas fluorescens strain 187* N0P150, respectively." Conclusion The results of this study indicated that sage, due to its abundant aerial biomass production, requires adequate fertilization to achieve high yields. However, the essential oil percentage of this plant was not affected by environmental factors such as fertilization and seemed to be more controlled by genetic factors. This finding can significantly contribute to the selection and introduction of cultivars with high essential oil percentages in the future. Furthermore, by combining chemical and biological fertilizers, it is possible to effectively influence the percentage and quantity of major essential oil compounds in sage and achieve the production of higher quality plants with a higher percentage of specific compounds.

Research Paper - Modeling

Simulating response of lentil cultivars to sowing date and initial soil moisture in Lorestan province

Mojtaba Koohro; Sajjad Rahimi-Moghaddam; khosro Azizi; Saeid Heidari; Seyed Reza Amiri

Volume 47, Issue 3 , November 2024, Pages 475-489

https://doi.org/10.22055/ppd.2024.45041.2127

Abstract

Introduction Legumes are the second food source after cereals, which provide almost a quarter of protein for developing countries. Lentil is recognized as one of important legumes ... Read More Introduction Legumes are the second food source after cereals, which provide almost a quarter of protein for developing countries. Lentil is recognized as one of important legumes due to its favourable characteristics. The lintile production, like to other crops has been influenced by three factors: management, genetics, and environment. Improving crop production can be achieved by optimizing these factors. Thus, paying attention to the above-mentioned factors can reduce the severe climatic effects on crop production. Among the above-mentioned factors, management strategies e.g., optimal sowing date and using the optimal cultivar are considered to improve crop production. Initial soil moisture, which can affect crop germination, establishment and ultimately growth and yield, is another important strategy. Accordingly, the current research was conducted in order to simulate the effects of cultivar, sowing date, and initial soil moisture on lentil grian yield in different locations of Lorestan province. Materials and Methods The study locations were Aligudarz, Nurabad, KhorramAbad, and Kuhdasht. Simple Simulation Models-iCrop2 (SSM-iCrop2) was used to simulate the lentil growth and development. The data required to run model included climatic, soil, management, and crop data. Daily long-term climatic data including maximum and minimum temperature, rainfall, and radiation were collected from Iran Meteorological Organization. The soil data included soil depth, soil water content at wilting point, soil water content at field capacity, and saturation water content, which were obtained from different data collection in the Ministry of Agriculture and Agricultural, the Natural Resources Research and Education Centers, and soil laboratories at each location and Food and Agriculture Organization and Global yield Gap Atlas.The management data such as palnt density, tillage, rows distance, and sowing depth were obtained by local experts from the Ministry of Agriculture and Agricultural and the Natural Resources Research and Education Centers at each location. The crop data e.g., the specific genetic coefficients of each cultivar were obtained form Amiri and Deihimfard (2018). The study treatments consisted of four sowing dates (21 January, 12 February, 4 March, and 30 April), two cultivars (early-maturity and late-maturity) and four initial soil moisture (32, 36, 42, and 58 mm). The model was run for 41 years (1980-2020). Initial soil water contents and sowing dates were obtained from a preliminary simulation experiment.Results and DiscussionAveraged across all treatments, the highest grain yield was obtained at KhorramAbad (388 kg ha-1) due to higher rainfall during the growing season. In addition, the grain yield difference among the sowing dates ranged from kg ha-1 on 30 April to 364 kg ha-1 on 21 January. The reason for the higher grain yield on 21 January sowing date was the higher cumulative rainfall season (149.3 mm vs. 99.2 mm) and the lower mean temperature (22.9 °C vs. 23.9 °C) during the growing season compared to other sowing dates. Across locations, sowing dates, and cultivars, the highest grain yield (263 kg ha-1) was simulated under initial soil moisture of 58 mm. Also, on average across sowing dates, initial soil moisture contents, and locations, the early-maturity cultivar simulated more grain yield than late-maturity cultivar (405 kg ha-1 vs. 63 kg ha-1) due to the avoidance of drought stress at the end of the growing season. Considering different interactions, on average across locations, the highest grain yield was simulated by 704 kg ha-1 in the combination of early-maturity cultivar, early sowing date (21 January), and initial soil moisture of 58 mm. Conclusion In general, the results indicated that the lentil grain yield varied among the various study treatments (sowing date, cultivar, and initial soil moisture) as well as different locations of Lorestan province. Lentil growers can increase the lentil production in Lorestan province and study locations by using the interaction of early planting date (21 January) ´ early-maturity cultivar (Kimia) ´ higher initial soil moisture (58 mm). It should be noted that the current research was conducted under water-limited condition and it is suggested that researchers focus on other limitimg and reducing factors in the future studies.

The Most Suitable Method and Time of Ber Tree (Ziziphus spina-christi L.) Budding in Ahvaz

Volume 34, Issue 2 , February 2012, , Pages 81-86

Abstract

Ber (Ziziphus spina-christi L.) is one of the tropical and subtropical fruit trees that grow in different countries in Europe, America, Africa, Australia, and Asia including Iran. Ber ... Read More

Effects of harvest time and packing method on fruit quality and Cold-Storage duration of "Gorban Maragheh" apricot cultivar

Volume 36, Issue 1 , June 2013, , Pages 1-11

Abstract

Apricot because of its high respiration rate and rapid ripening process has short storage life and so should be marketed immediately after harvest. Harvesting of apricot in suitable ... Read More

Induction of Transgenic Hairy Roots in Medicinal Plant Poppy (Papaver Somniferum L.) by Agrobacterium Rhizogenes-Mediated Transformation

Volume 39, Issue 4 , March 2017, , Pages 1-14

https://doi.org/10.22055/ppd.2017.12057

Abstract

Background and Objectives Opium poppy plant (Papaver somniferum L.) is one of the oldest known medicinal plants. Since the potential of medicinal components production in medicinal ... Read More Background and Objectives Opium poppy plant (Papaver somniferum L.) is one of the oldest known medicinal plants. Since the potential of medicinal components production in medicinal plants is very limited in natural conditions, plant tissue culture, as a new technology, has an important role in industrial production of secondary metabolites in medicinal plants. Among different tissue culture systems, hairy root is very stable in hormone-free culture conditions and these roots stably produce secondary metabolites over a long period due to their inherent genetic and biochemical stability. Hence, the objective of this study was to evaluate the effect of some different parameters on optimization of hairy production in P. somniferum. Materials and methods In the present research, for the optimization of hairy root in papaver, a factorial experiment was conducted based on a completely randomized design with 4 replications. The factors included different Agrobacterium rhizogenes strains (ATCC15834, A4 and GMI9534), medium (MS and ½ MS medium), two temperatures (17 and 25 °C) at co-cultivation period, and two different explants (excised shoot and hypocotyl). Different traits were evaluated including percentage of induced hairy roots, number of lateral branches/1cm, number of hairy root per explants and days after inoculation (DAI). Results Hairy roots were induced at the wound site of explants after weeks of culture. Analysis of the results showed that strain ATCC15834, ½ MS medium, temperature 25 °C and excised shoot explant were the best treatment combination for hairy roots induction in the poppy plant. Transformed hairy roots were confirmed by polymerase chain reaction (PCR) using rolB gene specific primers. Discussion All of the A. rhizogenes strains led to hairy root induction, but there were no hairy roots formed from control explants. Differences in virulence, morphology and growth rate can be partially explained by the variety of plasmids harbored by the A. rhizogenesis strains. In the present study, excised shoot explants were highly and significantly susceptible to infection by each strain of A. rhizogenes and hypocotyl explants showed low rate of hairy root induction.

Effect of Different Ploidy Levels on Pollen Grain Fertility, Seed Germination and Seedling Transplanting Ability of Eggplant

Volume 41, Issue 2 , September 2018, , Pages 1-12

https://doi.org/10.22055/ppd.2018.18116.1350

Abstract

Abstract Background and Objectives Eggplant (Solanum melongena L.) is an economically important crop with a wide range of fruit shapes and colors. Breeding programs in eggplant focus ... Read More Abstract Background and Objectives Eggplant (Solanum melongena L.) is an economically important crop with a wide range of fruit shapes and colors. Breeding programs in eggplant focus mainly on fruit quality. Production of commercial triploid cultivars and emission of seeds in fruits may increase acceptability by consumer and increase fruit quality. Induced tetraploidy and cross between di and tetraploid parental line is a conventional method used in different fruits and vegetables like watermelon. The current study aim to find how may induced tetraploidy affect pollen grain quality, its fertility, seed and transplant vigor in different eggplant cultivars. Materials and Methods Aiming to investigate autotetraploidy in four qultivars of Solanum melongena L., Keshtzar, Yalda, Chahboland and Passargad on fertility, number of days till fruit-set, germination rate and percentage and successful transplanting percentage, a survey was done in a completely randomized design. Tetraploid plants were derived from seed maceration/shoot tip treatment (0.5, 1 and 2 percent of colchicine). To ensure ploidy level, chromosome counting of root tips and flow-cytometry was done during the experiment. To quantify germination percentage and rate, 15 seeds of each cultivar in each ploidy level were placed in petri-dishes in three replications. The seeds of each ploidy form were sown in seedling trays and after seedling period, plugs were transplanted in field for evaluation of characteristics in different ploidy levels. Growth and development rate of plant in seedling stage observed since seeds were cultivated. As soon as hypocotyl appeared on the surface, they were counted. Then seedling emergence and rate were calculated. To test viability of pollen grains, they were stained using acetocarmen. In order to find best parental lines, 18 plants from each cultivar and in each ploidy level were cultivated in the greenhouse condition in three replications. Then all plants were crossed competley (direct and reciprocal). Di and tetraploid plants were tested to find out which one would be better as which parent. Results Number of days till fruit-set, characteristics of seed and seedling and growth rate in seedling stage were significantly (P≤5%) influenced by changes on levels of poloidy. Pollen grain staining with acetocarmine for evaluation of fertility percentage in pollen grains showed that with an increase in ploidy level, fertility may significantly increase (P≤5%). In an effort to triploid plant production, none of the crosses between di and tetraploid plant could bear fruit. Discussion With the overall results, despite slower growth, can be tetraploid plant, due to improved germination and seedling emergence, survival and reproductive capabilities, higher transplanting success in this category of plants, induced increase in the number of chromosomal bundles can be considered as a good way to create genetic variation and prepare parental lines with desirable traits for use in the breeding programs.

The Effect of Planting Date on Phonological Stages and Quantity Traits of Four Winter Rapeseed Cultivars in Yasouj

Volume 35, Issue 2 , September 2012, , Pages 99-113

Abstract

In order to study the effect of planting date on phonological stages and quantity traits of four cultivars of winter rapeseed, an experiment was carried out in 2008-2009 at the research ... Read More

Research Paper - Breeding of Fruit Trees Crops

Effect of rootstock and magnetized water on the morphological, physiological, and biochemical characteristics of apple sapling (Malus domestica) under salinity stress

Zahra esmaillou; Mohammadreza Asghari; Fariborz Zaare-Nahandi; Ebrahim Sepehr

Articles in Press, Accepted Manuscript, Available Online from 30 June 2024

https://doi.org/10.22055/ppd.2024.46457.2154

Abstract

Salinity poses a significant challenge to plant growth and can lead to adverse physiological and metabolic alterations. The selection of tolerant rootstocks offers a promising solution ... Read More Salinity poses a significant challenge to plant growth and can lead to adverse physiological and metabolic alterations. The selection of tolerant rootstocks offers a promising solution to mitigate this issue. Magnetized water technology has emerged as an innovative approach to alleviate the negative impact of salinity on water quality. In this greenhouse study, we aimed to explore the synergistic effects of rootstock selection and magnetized water treatment under salinity stress conditions on the growth of apple saplings. By examining these combined factors, we seek to understand their potential in enhancing plant resilience to salinity-induced stress. This research contributes to the ongoing efforts to develop sustainable strategies for managing salinity stress in agricultural settings, with implications for improving crop productivity and resilience in saline environments. Materials and Methods The factorial experiment was conducted using a randomized complete block design with four replications from 2019 to 2020 at the University of Urmia, Iran. The factors examined included two rootstocks (M7 and MM106), three levels of magnetized water (0, 0.1, and 0.2 Tesla), and three levels of salinity stress (0, 40, and 80 mM). To evaluate the investigated factors, leaf thickness, leaf temperature, leaf area, internode length, rootstock diameter, branch growth, greenness index (SPAD), relative water content (RWC), total phenol, antioxidant capacity and phenylalanine ammonia-lyase (PAL) enzyme were measured. Statistical analysis was done with SAS software (version 9.4). GLM procedure was used for the analysis of variance. Means were compared with the least significant difference (LSD) test. Results The three-way interactions of rootstock × magnetized water × salinity stress significantly influenced total phenol and PAL enzyme activity. Additionally, the main effects of rootstock, magnetized water and salinity stress on leaf thickness, root diameter, RWC and, SPAD were significant. Increasing salinity levels reduced rootstock diameter, shoot growth, leaf water content, SPAD, and leaf area. However, salinity treatment increased leaf thickness, leaf temperature, phenolic compound concentration, antioxidant capacity, and PAL activity compared to control. The highest internode (17.58 cm) and rootstock diameter (2.18 mm) were obtained with 0.1 Tesla magnetized water treatment. Conversely, increasing salinity stress reduced internode length in both M7 and MM106 rootstocks, and the maximum internode length was produced in M7 under non-saline conditions (19.35 cm). Also, the highest rootstock diameter (19.83 mm) was observed in MM106 under non-saline conditions. Moreover, leaf RWC was higher in M7 (82.70%) compared to MM106. The highest PAL enzyme activity (62.77 nmol g-1F.W.-1) was recorded under 80 mM salinity, 1.0 Tesla magnetic water, and M7 rootstock. Conclusion The utilization of magnetized water resulted in enhancements across various parameters including rootstock diameter, shoot growth, leaf water content, surface area, phenolic compounds, and PAL enzyme activity, surpassing the control group. Combining magnetic water treatment with M7 rootstock demonstrated significant mitigation of salinity-induced effects on apple saplings. Thus, the joint application of M7 rootstock and magnetic water is advocated for both saline and non-saline environments. This research underscores the importance of employing sustainable approaches to combat salinity stress in apple orchards, offering insights into effective management strategies for enhancing crop resilience in challenging agricultural conditions.

View Article

Research Paper

Evaluation and comparison of the percentage and yield of seed oil in different populations of the Dragon's head (Lallemantia iberica Fisch. et Mey) in the northwest of the country

Jalil Shafagh-Kolvanagh; Adel Dabbagh Mohammadi-Nasab; Yaegoob Raee; Payvand Samimifar; Mina Amani

Articles in Press, Accepted Manuscript, Available Online from 30 June 2024

https://doi.org/10.22055/ppd.2024.46229.2148

Abstract

Introduction: Dragon's head, due to low water requirement or in other words, low water expectation, a short growth period of about 80-95 days can be useful for the climatic conditions ... Read More Introduction: Dragon's head, due to low water requirement or in other words, low water expectation, a short growth period of about 80-95 days can be useful for the climatic conditions of the Iran, especially Azerbaijan. According to the planting of several ecotypes with diverse growth and yield characteristics and the measurement of various quantitative and qualitative traits, as well as the use of statistical methods in data analysis, it is possible to identify and introduce the compatible and suitable ecotypes for the region and, if necessary, in the breeding programs. Therefore, the purpose of this research is to investigate the percentage and yield of the oil of 49 ecotypes of Dragon's head. Materials and methods: In order to evaluate the characteristics related to the percentage and yield of the oil of 49 ecotypes of the Dragon's head collected from different regions of the Iran, a research in the form of a randomized complete block design with 3 replications was carried out during the years 2015 and 2016 in the research farm of the Faculty of Agriculture of the University of Tabriz. The most important traits measured included the length of the fertile branch, seed yield per unit area and the number of seeds in the main and branch branches, as well as some qualitative traits such as oil percentage and oil yield. Data normality test was done using SPSS software and statistical analysis of data based on randomized complete block design and composite analysis using MSTAT-C and SPSS software. The comparison of the average data of the evaluated traits was done using Tukey's test at the probability level of 1%. Also, to group the ecotypes, cluster analysis was done by Ward's method, and the cut point of the resulting dendrogram was determined using the detection function analysis, and Excel software was used to draw the figures. Research findings: The obtained results showed that the ecotypes significant differences in most of the studied traits. In the regression analysis of oil yield, the highest regression coefficient (1.098) was observed in seed yield per unit area. Based on the average comparison results, ecotypes No. 37 (Alwar village of Bostanabad) with an average of 116.3 gr/m2, No. 23 (Tabriz 4) with an average of 107.7 gr/m2 and No. 24 (local mass of Kalvanagh 14) with an average of 101.7 gr/m2 had the highest grain yield per unit area. According to the results of the variance analysis table of ecotype effect on seed oil percentage, the yield of oil per surface unit was significant. So that ecotype No. 8 (indigenous population of Kalvanaq 7 city) with an average of 44.3 % had the highest percentage of oil in the seed among the 49 tested ecotypes, and ecotype No. 27 (native population of Param 1 Harris village) was in the next rank. While ecotype No. 37 (native population of Alwar village, Bostanabad) had the highest oil yield per unit area with an average of 44.4 gr. Conclusion: Based on the results of this research, ecotypes No. 37 (Alwar village of Bostanabad), 23 (Tabriz 4) and 24 (Kolvanagh 14) were recognized as the most suitable and compatible ecotypes for Tabriz city in terms of grain and oil yield traits.

View Article

Research Paper - Agronomy

Study of yield and yield components of camelina (Camelina sativa L.) under water deficit stress conditions with the application of zeolite and wood vinegar

Amirmohammad Abedi; Seyed Ali Mohammad Modarres-Sanavy; Ali Heidarzadeh

Articles in Press, Accepted Manuscript, Available Online from 26 August 2024

https://doi.org/10.22055/ppd.2024.46482.2155

Abstract

Introduction: The agricultural sector bears the responsibility of ensuring food security through domestic production and natural resource conservation. Oilseeds are among the essential ... Read More Introduction: The agricultural sector bears the responsibility of ensuring food security through domestic production and natural resource conservation. Oilseeds are among the essential food items that require a significant amount of water. Introducing Camelina plant as a suitable alternative with characteristics compatible with unfavorable environmental conditions and low requirements for water and nutrients can serve as an effective solution for diversifying cultivation and meeting the country's oil needs. Materials and Methods: This study was conducted to investigate the yield and yield components of Camelina under zeolite and wood vinegar application in water deficit stress conditions. The experiment was carried out in 2023 in a split-plot factorial design with three replications at the Agricultural Faculty Farm of Tarbiat Modares University. The factors examined included irrigation regimes at four levels: optimal irrigation, mild water stress, moderate water stress, and severe water stress, corresponding to 20, 40, 60, and 80 percent of available water capacity after depletion (absorption in the root zone or evaporation), followed by irrigation to field capacity. These regimes were studied in main plots, combined with two levels of zeolite application (no application and 8 tons per hectares) and four levels of wood vinegar application (0, 5000, 10000, 15000 ppm) in subplots in a factorial combination. Results and Discussion: According to the results, it can be concluded that the use of zeolite and foliar spraying of wood vinegar in optimal irrigation conditions can have significant improvements in all the measured traits. Also, in moderate and severe irrigation conditions, these effects become more significant. But it should be noted that in severe irrigation, no significant effects of zeolite were observed, while the use of wood vinegar with a concentration of 10,000 ppm can have significant improvements in some plant characteristics, such as grain yield and harvest index. Overall, these results show that the use of zeolite and wood vinegar can be used as effective methods in improving the performance of plants, especially in low water conditions. According to the results, it can be concluded that the use of zeolite and foliar spraying of wood vinegar in optimal irrigation conditions can have significant improvements in all the measured traits. Also, in moderate and severe irrigation conditions, these effects become more significant. But it should be noted that in severe irrigation, no significant effects of zeolite were observed, while the use of wood vinegar with a concentration of 10,000 ppm can have significant improvements in some plant characteristics, such as grain yield and harvest index. Overall, these results show that the use of zeolite and wood vinegar can be used as effective methods in improving the performance of plants, especially in low water conditions. According to the results, it can be concluded that the use of zeolite and foliar spraying of wood vinegar in optimal irrigation conditions can have significant improvements in all the measured traits. Also, in moderate and severe irrigation conditions, these effects become more significant. But it should be noted that in severe irrigation, no significant effects of zeolite were observed, while the use of wood vinegar with a concentration of 10,000 ppm can have significant improvements in some plant characteristics, such as grain yield and harvest index. Overall, these results show that the use of zeolite and wood vinegar can be used as effective methods in improving the performance of plants, especially in low water conditions. Conclusion: For increasing seed yield and biological yield, moderate water stress along with zeolite application is recommended as the most cost-effective treatment. In severe water stress conditions, the application of wood vinegar foliar application at 10000 ppm concentration is recommended to enhance seed yield and biological yield.

View Article

Research Paper

The effect of foliar application of gamma aminobutyric acid (GABA) and forchlorfenuron (CPPU) on some physiological and biochemical characteristics of strawberry cv. Camarosa

Naeimeh Soukht Saraei; Feryal Varasteh; Hamid Reza Sadeghipour

Articles in Press, Accepted Manuscript, Available Online from 08 September 2024

https://doi.org/10.22055/ppd.2024.47877.2199

Abstract

Introduction Strawberry is one of the most popular fruits, accordingly, its maintenance and increased quality without using harmful chemical compounds is of great concern. Gamma-aminobutyric ... Read More Introduction Strawberry is one of the most popular fruits, accordingly, its maintenance and increased quality without using harmful chemical compounds is of great concern. Gamma-aminobutyric acid (GABA) is a four-carbon non-protein amino acid that affects plant growth activities, tricarboxylic acid cycle, production of primary and secondary metabolites, and response to biotic and abiotic stresses. Growth hormones, especially those growth regulators that increase photosynthesis and plant function, have good potential for agricultural development. The plant hormone cytokinin plays an effective role in controlling many vital processes, including plant growth and flowering. Cytokinins cause an increase in cell division, and therefore, if they are used in the initial stage of the sigmoid curve of fruit growth, when cell division is underway, they may increase the number of cells in each fruit. Materials and Methods The well-developed and consistent strawberry plantlets of the Camarosa cultivar were planted during October 2022 in Ramian County, Golestan province, Iran (UTM: 318446, 4092385). The foliar application of GABA solutions at 10 and 20 mM as well as control (water) was carried out at the flowering stage and 10 days later and the foliar application of forchlorfenuron )CPPU( solutions at 5 and 10 mg/L was carried out at the flowering stage. This research was conducted in the form of a complete randomized blocks design in three replications. Fruits were collected when they reached a consistent ripening stage, as characterized by change of fruit's surface color to red by more than 75% and were promptly transported to the laboratory for analysis. Root volume and weight, total sugar and leaf photosynthetic pigments, length, diameter and shape of fruit, percentage of malformed fruit, fruit firmness, total sugar, fruit color, total weight of harvested fruit and fruit cytokinin were assessed. Data analysis was done using SAS version 9.1 software and comparison of means was done through Duncan's multiple range test at the 1% probability level. Results and Discussion The analysis of variance of the data showed that the effect of GABA treatment at the probability level of 1% on root volume and weight, carotenoid and chlorophyll b of leaf, fruit firmness and the total weight of the harvested fruit at the probability level of 1% and on the total chlorophyll of leaf and percentage of malformed fruit at the probability level of 5% was significant. Leaf area, chlorophyll a, total leaf sugar, fruit length, diameter and length-to-diameter ratio were not affected by GABA spraying. Also, the effect of CPPU treatment was significant at 1% probability level on root volume and weight, leaf area, leaf carotenoid, fruit length and firmness, and percentage of malformed fruits, and at 5% probability level on chlorophyll a and total, fruit length to diameter ratio. Total sugar and chlorophyll b of leaf, fruit diameter and total weight of harvested fruit were not affected by CPPU solution. GABA treatment (20 mM) could increase the total weight of the harvested fruits from each experimental unit by 17%. Plants sprayed with CPPU had more leaf area compared to the control non-sprayed plants. The total chlorophyll amount of leaf increased with increasing GABA and CPPU concentration, and the highest leaf total chlorophyll was found in 20 mM GABA (1.384 mg/g) and 10 mg/L CPPU (1.430 mg/g). 10 mg/L CPPU treatment caused 107 and 59% increase in root volume and weight compared to the control, respectively. The highest fruit length (65.51 mm) and fruit length to diameter ratio (1.69) were obtained in plants sprayed with 10 mg/L CPPU. The highest firmness of the fruit tissue (1.96 N/cm2) was observed in plants sprayed with 20 mM GABA. Accordingly, GABA and CPPU treatments could significantly reduce the malformed fruit and the lowest was observed in CPPU treatment at a concentration of 10 mg/L. Also, both GABA and CPPU treatments had a significant effect on fruit color brightness index and total fruit sugar. Conclusion GABA and CPPU can act as a regulatory factor for plant growth and development. In general, the fruits obtained from plants sprayed with GABA and CPPU were of higher quality. Finally, according to the results, foliar spraying of Camarosa strawberry plants with 20 mM GABA and 10 mg/L CPPU is recommended in order to produce high-quality and long-lasting fruit.

View Article

Research Paper

Study of phenological, physiological, and yield responses of indehiscent and dehiscent sesame (Sesamum indicum L.) cultivars to sowing dates in Dezful, Iran

Mehdei Attar Roshan; Afrasiyab Rahnama; Moosa Meskarbashee; Mohammad reza Siahpoosh; Matthew Harrison

Articles in Press, Accepted Manuscript, Available Online from 28 September 2024

https://doi.org/10.22055/ppd.2024.47179.2178

Abstract

Extended abstract Introduction Sesame (Sesamum indicum L.) is one of the oldest oilseed crops cultivated for purposes relating to industry and household consumption. It is widely grown ... Read More Extended abstract Introduction Sesame (Sesamum indicum L.) is one of the oldest oilseed crops cultivated for purposes relating to industry and household consumption. It is widely grown in tropical and subtropical regions around the world. Sesame productivity can be highly variable depending upon the growing conditions, cultivars, and cultural practices. Sowing date is a critical field crop management practice that influences the intensity of other practices applied in crop growth and production. Grain yield significantly influences by sowing date and cultivar. The optimal sowing date is one of the most important and low cost field management practices affecting crop growth and yield. In general, early sowing dates correspond to higher growth and grain yields. The aim of this study was to explore an optimum sowing date for new indehiscent sesame cultivars and obtain new superior cultivars with the highest yield potential and adaptation to different sowing date in Dezful region. Materials and Methods In order to study the effects of different sowing dates on phonological traits, photosynthetic parameters, and grain and oil yields of dehiscent and indehiscent sesame cultivars, a field experiment was carried out in a split plot arrangement in randomized complete block design with four replications in 2021-2022. The study site was located in Dezful, Iran. The main plots included three sowing dates, June 5, June 20, and July 20, and the sub-plots consisted three indehiscent (Chamran, Mohajer, Barkat) and one dehiscent (Schewin) sesame cultivars. 5 th June sowing date was considered as early sowing date, and 5 th July sowing date was considered as early sowing date. The data regarding plant heigh, height of the first capsule, length of capsule bearing zone, days to the first capsule emergence, days to flowering, stomatal conductance, photosynthetic rate, transpiration rate, chlorophylle index, grain yield, biological yield, harvest index, oil content and oil yield was recorded. Results and discussion Significant genotypic differences in phenological traits, photosynthetic parameters, and grain and oil yields were observed among cultivars and across treatments. Different sowing dates differently influenced photosynthetic properties, phenological traits, and grain and oil yields of sesame cultivars. Sowing dates differently led to significant changes in plant heigh, height of the first capsule, length of capsule bearing zone, days to the first capsule emergence, days to flowering, stomatal conductance, photosynthetic rate, transpiration rate, chlorophylle index, grain yield, biological yield, harvest index, oil content and oil yield. In both years. In 2021, 5 th June early sowing date caused a significant decrease in grain yield of Chamran, Schewin, Mohajer and Barkat cultivars by 1, 25, 11 and 6%, respectively, compared to 20 th June sowing date, while 5 th July late sowing date caused a significant reduction in grain yield of Mohajer and Barkat by 21and 37%, respectively, but increased grain yield of Chamran and Schewin by 12 and 28%, respectively. There was genetic variation in grain and oil yield across cultivars in response to sowing dates. Barkat and Mohajer cultivars with the higher grain yield showed greater grain yield stability in response to early sowing date, when compared to Schwin cultivar. Conclusion Overall, the results of this experiment showed that optimum sowing dates from 5 th June to 20 th June is recommended as the optimal sowing date to improve sesame production in humid tropical areas. Moreover, Barkat cultivar had the highest grain and oil yield; it is recommended along with Mohajer cultivar for both early and late sowing date conditions in Khuzestan region. Keywords: Days to flowering, Oil yield, Photosynthetic rate, Stomatal conductance

View Article

Research Paper - Pomology

Effect of preharvest foliar spraying of compounds containing calcium and potassiumon on the shelf life of thornless blackberry

ehsan alinezhad; Mehdi hadadinejad; Kamran Ghasemi; Morteza Soleimani Aghdam

Articles in Press, Accepted Manuscript, Available Online from 28 September 2024

https://doi.org/10.22055/ppd.2024.46550.2157

Abstract

Background and Objectives: Blackberries due to the lack of protective layer or cuticle, are sensitive to decay and weight loss wrinkle after harvest. Therefore, blackberry have a short ... Read More Background and Objectives: Blackberries due to the lack of protective layer or cuticle, are sensitive to decay and weight loss wrinkle after harvest. Therefore, blackberry have a short life and long-term storage of blackberry is difficult. For this reason, in this study, the effect of pre-harvest treatments on the shelf life of thornless blackberry was investigated. Materials and Methods: This experiment was conducted in 2020 as a factorial in the form of a completely randomized design with two factors in three replications. The first factor consisted of nutritional treatments at five levels (control, calcium nitrate 5 g/L, potassium silicate 1 g/L, calcium nitrate 5 g/L + potassium silicate 1 g/L, and potassium fertilizer 51-0-0 with a concentration of 3.5 g/L) which applied in stage fruitset. The second factor was storage time in cold storage(4 ͦC) at four levels (0, 6, 12 and 18 days post harvesting). Qualitative traits (percentage of weight loss and firmness of the fruit), sensory quality (pH of the extract, soluble solids, taste index, ascorbic acid), nutritional value (total phenol and anthocyanin), and sensory evaluation (marketability, taste, and color of the fruit) were examined. Results: The results indicated during the storage period of blackberry, the weight loss of the berry showed an increasing trend. The combined treatment of calcium nitrate and potassium silicate significantly reduced berry water loss on the eighteenth day. This treatment also managed to maintain the highest berry firmness (0.21 N) during storage, whereas a decrease in firmness was observed with an increase in storage time. Berry length and width decreased with increased storage time, with the highest values obtained in the control treatment (2.107 and 1.923 centimeters, respectively). The levels of soluble solids and taste index increased from harvest to the twelfth day, with the highest amounts (9 and 4.22, respectively) obtained in the potassium silicate treatment. Also, the examination of the amount of ascorbic acid showed that during the storage period of blackberry, its amount in the control treatment increased until the sixth day and then decreased until the end of the storage period. The application of potassium silicate led to a significant preservation (P≤ 0.05) of vitamin C compared to other treatments during storage, with 9% of vitamin C observed in this treatment on the eighteenth day. The highest amount of phenols during storage, with the application of calcium nitrate and potassium silicate, was 74.75 mg/g gallic acid of fruit extract. Based on the results, fruit anthocyanin also showed the highest amount (189.8 mg cyanidin 3-glucoside per liter of juice) in the combined treatment of calcium nitrate*potassium silicate on the day of harvest.Finally, the sensory parameter evaluation showed that fruit quality decreased with increased storage time, along with a reduction in consumer preference. Among pre-harvest treatments, potassium treatments were found to be more effective. Discussion: The overall results have shown that using a combined treatment of calcium nitrate and potassium silicate increases the firmness of fruit during storage. Additionally, potassium silicate has a positive impact on the soluble solid content and fruit taste index, and it can help preserve vitamin C in the fruit. The use of calcium nitrate and potassium silicate enhances the levels of phenols and anthocyanins in the fruit. While the quality of the fruit may decrease with longer storage time, the use of nutritional treatments can assist farmers and fruit sellers in improving storage and enhancing the quality of their products.

View Article

Research Paper - Post Harvest Physiology

Investigating the physicochemical changes of Golden Delicious apple fruit (Malus domestica cv. Golden Delicious) with the application of chitosan and nanochitosan before harvesting and calcium chloride immersion after harvesting

Fatemeh Eyni Tari; Abdollah Ehtesham Nia; Hassan mumivand; Mohamadreza Raji

Articles in Press, Accepted Manuscript, Available Online from 28 September 2024

https://doi.org/10.22055/ppd.2024.47136.2177

Abstract

Introduction Today, healthy lifestyle has faced a high demand at the global level and this demand has increased the need to preserve or better store fresh food items such as fruits ... Read More Introduction Today, healthy lifestyle has faced a high demand at the global level and this demand has increased the need to preserve or better store fresh food items such as fruits because of their abundant amounts of vitamins and minerals. On the other hand, the increase in post-harvest waste has made it necessary to develop the use of natural compounds compatible with nature and humans, in order to produce products free of harmful substances and with high nutritional value, along with reducing waste. Materials and Methods For this purpose, the present experiment is a factorial in the form of a completely randomized design, in 4 replications and includes the first factor of foliar treatments before and after harvesting, including control treatments (spraying with distilled water), chitosan (50 mg/lit) and Nano chitosan (50 and 100 mg/lit) and immersion of the harvested fruits with calcium chloride solution in the post-harvest phase (0 and 2 %) and the second factor of storage time (at 0, 60, 90 and 120 days) ) was carried out on fruits of Golden delicious apple grafted on MM 111 (Malling Merton 111). The foliar spraying before harvesting was done in an 18-year-old apple orchard, located in the Abestan region of Khorramabad city, and the immersion phase was carried out in the laboratory after harvesting at Lorestan University. After initial washing, the fruits were first washed with distilled water, dried and then immersed in calcium chloride solution at room temperature for 8 minutes. Then, in the vicinity of the cool air flow, in order to ensure the removal of excess surface moisture, it was kept in plastic fruit boxes and in the refrigerator at a temperature of 4 ° and a relative humidity of 80-90% until the time of measuring the parameters. In this study, physiological and biochemical characteristics such as weight loss, acidity, titratable acids, soluble solids, ripening index, vitamin C and malondialdehyde were investigated. Results and Discussion The results of the research showed that the treatments used affected the investigated characteristics of apple fruit. The treated fruits had less weight loss than the control treatment. Examining the biochemical characteristics also showed the positive effect of all the treatments on the desired parameters, so that the most titratable acids, vitamin C and the least amount of acidity and malondialdehyde were obtained in the combined treatments of nano chitosan and calcium chloride. Also, the treatments used reduced the soluble solids and fruit ripening index. Coatings such as chitosan create a barrier with selective permeability against oxygen and carbon dioxide gases and create an altered atmosphere by placing carbon dioxide at a higher level and reducing oxygen around the fruit, which process increases respiration rate and ethylene production. reduce the aging process. Conclusion Based on the general results, it can be stated that the application of 100 mg/lit chitosan nanoparticle treatments in the pre-harvest stage along with the immersion of the fruits in the post-harvest stage in a 2% calcium chloride solution, in most features It showed better results than other treatment levels.

View Article

Research Paper - Moderate Fruits

Evaluation of Quantitative and Qualitative Traits of Peach Cultivars under the Climatic Conditions of Kermanshah Province

Isa Arji; Mohammad Gerdakaneh; Ali Imani; Rahmatollah Gholami

Articles in Press, Accepted Manuscript, Available Online from 28 September 2024

https://doi.org/10.22055/ppd.2024.47668.2192

Abstract

Introduction Peach is one of the most important fruit trees that has been cultivated in Iran since ancient times. Therefore, investigating the adaptability and selecting the best peach ... Read More Introduction Peach is one of the most important fruit trees that has been cultivated in Iran since ancient times. Therefore, investigating the adaptability and selecting the best peach varieties for its cultivation expansion is of great importance. The ability of a peach cultivar (a specific cultivated variety of peach) to adapt to a new environment depends on several factors, including: climate, soil and disease and pest resistance. Understanding these factors is crucial for successfully introducing peach cultivars to new areas. Researchers and growers are constantly working to develop new cultivars, evaluate existing cultivars and refine agricultural practices. By considering cultivar adaptability and implementing appropriate strategies, growers can expand peach cultivation into new regions, increasing fruit production and diversifying the agricultural landscape. Materials and Methods This project was conducted with 15 peach varieties to evaluate their adaptability for a period of three years starting from 2016 at the Urban Orchard Research Station in Kermanshah Province. The trees were planted in a randomized complete block design with three replications at a spacing of 4 m x 4 m in December 2013. Four trees were planted in each experimental unit, and a total of 12 trees were evaluated for each variety. To evaluate the pomological and yield characteristics of the cultivars, various fruit traits were measured over a three-year period from 2016 to 2018. These traits included fruit and stone weight, fruit and stone dimensions, stone-to-flesh adhesion, skin and flesh color, percent soluble solids, pH, fruit acidity, tree yield, yield efficiency, ripening time, and ripening duration. At the onset of fruit color change, all fruits on each tree were counted. Upon ripening, all fruits of each cultivar were harvested and weighed. A 30-fruit sample was then selected to determine weight, flesh content, stone weight, and fruit quality parameters, including soluble solids, pH, and titratable acidity. To assess quality traits, juice was first prepared from five ripe fruits. Soluble solids were measured using a handheld refractometer model [refractometer model]. pH was measured using a pH meter model [pH meter model]. Titratable acidity was determined by titration with 0.1 N NaOH solution in the presence of phenolphthalein indicator until a color change to purple was observed. The amount of NaOH consumed indicates the malic acid content per 100 g of fruit, which is the predominant acid in peach and nectarine fruits (Cantín et al., 2010). The collected data were analyzed using the MSTATC software, and mean comparisons were performed using Duncan's multiple range test. Results The results showed that there were significant differences among the varieties in terms of various fruit characteristics, including the number of fruits per tree, fruit weight, fruit and stone dimensions, fruit yield per tree and hectare, and fruit quality characteristics such as soluble solids, pH, and titratable acidity. The average yield over three years indicated that the fruit yield per hectare varied among the varieties from about 5.5 tons per hectare to about 38 tons per hectare. The 'Suncrest' variety had the highest yield with over 35 tons per hectare. Other varieties such as 'Federica', 'Babygold 6', and 'Babygold 7' were also superior with over 25 tons of fruit per hectare. Based on their good yield, fruit weight, and fruit quality, the varieties 'Suncrest', 'Federica', 'DixiRed', 'Domiziana', 'J.H. Hale', 'Amipsimidia', 'Alberta', 'Spring Crest', and 'Anjiry' were found to be suitable for fresh consumption. For industrial purposes, the use of the varieties 'Babygold 7', 'Babygold 6', and 'Sudanl' was found to be appropriate due to their fruit quality and very high yield. Conclusion This study provides valuable insights into the selection of suitable peach varieties for cultivation in Iran, considering both fresh market and industrial processing applications. The findings can guide farmers and policymakers in optimizing peach production and enhancing the competitiveness of the Iranian fruit industry.

View Article

Research Paper - Breeding of Fruit Trees Crops

Morphological evaluation of some Caprifig accessions in South Khorasan Razavi

Mohammad Hasan Bagheri; Mahdi علیزاده; Moslem Jafari; Esmaeil Seifi; khalil Zaynali Nezhad

Articles in Press, Accepted Manuscript, Available Online from 28 September 2024

https://doi.org/10.22055/ppd.2024.46624.2160

Abstract

Introduction Figs are one of the fruit trees that were domesticated earlier than other plants, and fig cultivation in Turkey was long before the cultivation of other plants by humans. ... Read More Introduction Figs are one of the fruit trees that were domesticated earlier than other plants, and fig cultivation in Turkey was long before the cultivation of other plants by humans. According to the history of fig cultivation, it can be said that this plant is one of the first fruit trees that humans have attempted selection technique for its breeding. According to the researchers, the diversity of the population under selection guarantees the achievement of desirable results in the breed-specific programs. The first step for any reeding program is to know the existing accessions in the region and get to know their breeding potentials. In most regions of Iran, fig trees are seen as feral wild species. Regarding the study and identification of wild figs in Iran, several studies have been taken. Most of these actions have taken place in Fars province. So far, no report has been published regarding the study of figs in the southern regions of Khorasan-e- Razavi, which is considered one of the natural habitats of figs. In this research, the caprifigs widespread in these areas have been studied. Materials and methods In this research, morphological evaluation of 10 accessions of figs in the south Khorasan-e-Razavi was done and compared with two commercial cultivars of Estehban Fars. The location of the sampling sites was in a wide range of areas in the south of Khorasan-e-Razavi (from the southernmost village of Gonabad to Bardskan). To evaluate the morphological characteristics, the IPGRI international descriptor and also the national guidelines for tests of differentiation, uniformity and stability in figs (Institute of Registration and Certification of Seeds and Seedlings of Iran) were used. For this purpose, leaf vegetative characteristics and some special characteristics of figs were measured. The measurements were carried out according to the type of trait in late spring and mid-summer. This research was carried out in the form of a nest design with 3 replications. In each repetition, 5 measurement samples and its average data were used. For data analysis, SAS ver 9.4 software was used for cluster analysis using UPGMA algorithm and based on Euclidean morphological distance, as well as NTSYS ver 2.0.1.5 software was used for cluster drawing. Results and disscussion The results showed that there is a significant difference between the morphological characteristics of the studied fig masses. principle component analyses in quantitative traits showed that the eigenvalue is greater than one in nine factors. Examining the analysis results with factors in quantitative traits showed that only the first three factors alone can justify more than 92% of the variation. Also, the analyses into main factors in qualitative traits showed that the number of 12 factors, their eigenvalue is more than one, and the first six factors explain more than 93% of the variation. Cluster analysis showed that all investigated masses are placed in three groups. The first group included the Branjirs of Estehban Fars. The second group included only Pechek and Bejestan figs, and other figs were included in the third group. Conclusion Collecting and determining the characteristics of germplasm is the most important stage of fruit tree breeding programs. Iran is considsered as one of the important centers of plant genetic reserves and is one of the primary origins of Figs. The results of this research showed the extraordinary diversity of caprifigs in a wide range of southern Khorasan-e-Razavi. Due to the observation of high diversity in the studied genotpes, it is suggested to evaluate these accessions from different molecular and biochemical aspects.

View Article

Research Paper - Plant Physiology

The Effect of Sodium Nitroprusside on some Morphological and Physiological Traits of Evening Primrose (Oenothera biennis L.) under Salt Stress

Saeideh Alizadeh-salteh; Aysan Nourizad Ahmedabad; Sahebali Bolandnazar; Mina Amani

Articles in Press, Accepted Manuscript, Available Online from 29 September 2024

https://doi.org/10.22055/ppd.2024.47316.2186

Abstract

Introduction: Salinity is one of the environmental stresses that has a negative effect on the growth and development process and causes oxidative stress in plants. By creating harmful ... Read More Introduction: Salinity is one of the environmental stresses that has a negative effect on the growth and development process and causes oxidative stress in plants. By creating harmful changes in the balance of ions, water status, nutrients, stomatal function and photosynthesis efficiency, salinity causes a decrease in plant growth and development processes such as germination, seedling growth, and finally, a decrease in the amount of crop production in the plant. Sodium nitroprusside is a relatively stable gas radical that prevents the production of reactive oxygen radicals in low concentrations. It has been reported that sodium nitroprusside as a signal conducting molecule in various physiological processes such as seed germination, leaf senescence, ethylene production, stomatal closure and various defense responses to biotic and abiotic stresses such as salinity, drought and UV-B radiation is involved. Also, sodium nitroprusside plays a role in regulating various developmental processes and plant growth, including root growth, respiration, flowering, and cell death. Considering the positive effects of sodium nitroprusside on plants and the importance of evening primrose, the aim of this research was to investigate the effect of sodium nitroprusside on improving the morphological and physiological properties of evening primrose medicinal plant in adjusting salinity stress in greenhouse cultivation. Materials and methods: In the present experiment, the effect of salinity stress caused by sodium chloride at four levels (0, 4, 8, 12 dS/m) and its modification by sodium nitroprusside as foliar spraying at four concentrations of zero (control), 0.05, 0.1, 0.15 mM as sodium nitroprusside releasing compound in evening primrose was carried out factorially based on a completely randomized design in three replications in the greenhouse of Horticultural Sciences, Faculty of Agriculture, University of Tabriz. Salt treatment (NaCl) was applied after planting in pots and two times in the form of a solution in water and injected into the plant roots, and nitroprusside treatment was applied at four levels and with an interval of two weeks until flowering (mid-spring). It was done to the leaf. To facilitate sodium nitroprusside foliar spraying and also to increase accuracy, a sprayer was used so that foliar spraying is done uniformly on the aerial part of the plant. At first, the test of normality of the data and the uniformity of intra-treatment variances was performed and confirmed. Analysis of the variance of the data was done factorially in the form of a completely randomized design in three replications. The mean comparison of the treatments was done by Duncan's test at the probability level of 1%. SAS software (Ver. 9.3) was used for data analysis and Excel software was used for drawing graphs. Results and Discussion: In total, the results of the present experiment showed that the application of salinity treatment caused a significant decrease in fresh and dry weight of leaves, the amount of leaf area and leaf chlorophyll index, while it caused a significant increase in the percentage of ionic electrolyte leakage. The decrease in leaf area due to salt stress is either as a result of a decrease in the number of leaves due to a decrease in photosynthesis or a decrease in leaf size due to a decrease in turgor pressure. So that the highest number (47/08) was obtained in the 4 decisimons treatment and per meter and leaf area (247/95) in the control treatment. Also, the highest percentage of ionic electrolyte leakage (27.5%) was observed at a concentration of 12 deci-siemens/m, but the effect of different concentrations of salinity on the amount of antioxidant activity was not significant. The results showed that sodium nitroprusside treatment caused a significant decrease in leaf dry weight, ion electrolyte leakage percentage. On the other hand, it has caused a significant increase in dry matter percentage, leaf surface, chlorophyll index and antioxidant activity. So that the maximum amount of leaf area, chlorophyll index and antioxidant activity was obtained in the concentration of 0.15 mM sodium nitroprusside. Conclusion: Sodium nitroprusside has a useful and effective role in improving the growth characteristics and function of aerial organs and the quantitative and qualitative characteristics of evening primrose. So that the concentration of 0.15 mM was considered as the optimal concentration for improving the morphological and physiological traits.

View Article

Research Paper

Effect of girdling time on flowering properties of olive trees in Ahvaz climate

Yahya Mansouri; Shohreh Zivdar; Esmaeil Khaleghi

Articles in Press, Accepted Manuscript, Available Online from 23 October 2024

https://doi.org/10.22055/ppd.2024.47834.2197

Abstract

Background and Objectives Olive is one of the most important fruit trees. It has special importance in the fruit production industry of Iran and the world. During the past decades, ... Read More Background and Objectives Olive is one of the most important fruit trees. It has special importance in the fruit production industry of Iran and the world. During the past decades, in Khuzestan province, like some regions of the country, many olive orchard have been stablished without considering the selection of suitable cultivars; so that after several years, olive trees have the problems in terms of flower production, such as lack of flowering, poor flowering, poor fruit set and a decrease in oil percentage. Different methods can be used to solve these problems. Girdling is one of the most important methods of bark prunning, which causes early flowering, fruiting, and increasing the tree's productivity time. Considering the role of girdling, this research was designed to investigate the effects of girdling at different times on the flowering and biochemical characteristics of three olive cultivars (Conservalia, Roghani, and Mission) with poor flower production. Materials and Methods This experiment was conducted in the olive research orchard of the Faculty of Agriculture of Shahid Chamran University of Ahvaz, on 20-year-old olive trees in 2022-2023. In this experiment, the effects of girdling on the quantitative and qualitative characteristics of flowers and some biochemical indicators were investigated.The statistical design was the split plots with a basic design of randomized complete blocks Cultivars (Conservalia, Roghani, Mission) as the main plot and girdling time (control without girdling, girdling in January, February and March) was considered as a sub-plot with 4 replications. Results and Discussion The results showed that girdling at all times increased the number of flowers in the inflorescence compared to the control treatment. In january girdling, the highest number of flower in the inflorescence was recorded (18.17), which was more than the number of flowers in the control (9.1). The highest number of flower in the inflorescence occurred in the Roghani cultivar (14.87). The highest percentage of complete flowers was recorded in january girdling (49.92%) and the Mission showed the highest percentage of complete flowers (45.31%). The relative water content in january girdling showed the highest value (84.49%), which was significantly higher than the relative water content in the control, february and march. The highest relative water content was recorded in Mission (72.33%). Girdling significantly increased the fresh weight of leaves in the ringed branches, but this effect was reduced from January to March. Roghani had the highest leaf dry weight (14.94 g), which was not significantly different from Mission's leaf dry weight (13.69 g), but it was significantly higher than Conservalia's dry weight. The highest amount of leaf dry weight was recorded in January girdling (17 g), which was higher than the dry weight of leaves in the control, February and March girdling.The highest amount of total soluble carbohydrates in the Roghani cultivar was obtained in June (22.23 mg/g). Girdling increased the amount of total soluble carbohydrate, but it decreased from January to March. The results showed that the number of flowers in the inflorescence, fresh and dry weight of flowers and inflorescences, the percentage of complete flowers in the branches treated with girdling, increased and the beginning of flowering was improved. Roghani and Mission cultivars showed better results regarding flowering characteristics, carbohydrates, leaf relative water content and leaf dry weight. Conclusion The immediate effect of girdling is to limit the transfer of sap flow from the leaves to the root tissue and the bottom of the plant, which accumulates sugar and plant hormones in the upper part of the wound. These accumulated materials are transferred to the growing buds and inflorescences and affect them. In general, in the present experiment, girdling improved the flowering traits and the best time of girdling is in January that recommended for olive cultivars.

View Article

Research Paper

Effect of bulk and nanoparticle chelates of iron, zinc, and boron on chickpea (Cicer arietinum L.) in dryland farming: Enhancing grain yield

Mohsen Saeidi; Davood Rahimi monfared; Saeid Jalali Honarmand

Articles in Press, Accepted Manuscript, Available Online from 23 October 2024

https://doi.org/10.22055/ppd.2024.47290.2183

Abstract

Introduction: Legumes are the most important source of plant food after cereals. Chickpea (Cicer arietinum L.) is one of the most important crops of the legume family, and it is planted ... Read More Introduction: Legumes are the most important source of plant food after cereals. Chickpea (Cicer arietinum L.) is one of the most important crops of the legume family, and it is planted as rainfed in semi-arid regions like most western regions of Iran. Chickpea seeds are a valuable addition to the human diet, particularly for low-income individuals, and also, are rich in protein (18-22%), unsaturated fatty acids (such as linoleic acid and oleic acid), and a good source of vitamins, such as riboflavin, niacin, thiamin, and folate (the natural form of vitamin B9), as well as beta-carotene (a precursor of vitamin A synthesis) and minerals like calcium, magnesium, phosphorus, and potassium. In terms of total grain yield production in rainfed environments, chickpea is the third crop in Iran. The largest area under chickpea cultivation in Iran, with about 141 thousand hectares, belongs to Kermanshah province. The lack of moisture and the absorbable form of nutrients in the soil solution is one of the essential reasons for the low yield of chickpeas in Iran's rainfed fields (480 kg ha-1) compared to its global average (1057 kg ha-1). Therefore, this research aims to improve the grain yield of chickpea in the condition of improving nutrition by using iron, zinc, and boron chelates as bulk and nanoparticles. Materials and Methods: This study was conducted under rainfed conditions and at the research farm of the Agriculture and Natural Resources Campus of Razi University in 2018-2019. A randomized complete block design was implemented in three replications. Fertilizer treatments were applied in two steps at the beginning of vegetative growth and flowering as foliar application. Bulk and nanoparticle forms of iron, zinc, and boron chelates in three concentrations (2, 4, and 8 g l-1) and their combined forms and the control treatment were used. Results and Discussion: According to the soil analysis results, in the soil solution, a lack of absorbable forms of iron, zinc, and boron was observed. The results of data variance analysis showed that the effect of the type and concentration of fertilizer on the grain yield and its components was significant. All fertilizer types, except boron fertilizer, caused a significant increase in grain yield compared to the control. The highest grain yield (814 kg ha-1) compared to the control was obtained in the treatment of iron + zinc + boron and iron + zinc and bulk zinc fertilizer combination with 1196, 1108, and 1053 kg ha-1, respectively. With increasing fertilizer concentration, grain yield and biomass, 100 grain weight, number of pods plant-1, number of grain pod-1, number of grain plant-1, and plant height increased significantly compared to the control. The concentration of 8 g l-1 of all fertilizer treatments had the most positive and significant effect on the grain yield and its components. In this connection, the highest grain and biomass yield, with 1392 and 3287 kg ha-1, respectively, was seen in the concentration of 8 g l-1 of iron x zinc x boron fertilizer treatment. Conclusion: Iron and zinc nanoparticle fertilizers were not superior to their bulk form in terms of a significant increase in grain yield. However, regarding plant height increase, bulk iron and zinc fertilizers were superior to nanoparticle iron and zinc fertilizers. According to this research, iron and zinc nanoparticle fertilizers did not have a significant advantage over their bulk form in increasing chickpea grain yield in rainfed environment. According to various reports about the higher efficiency of nanoparticle fertilizers compared to their bulk form in irrigated environments, the efficiency of nanoparticle fertilizers compared to their bulk form in rainfed environments should be studied more.

View Article

Research Paper

The effect of sodium nitroprusside and triacanthanol on the morphological and phytochemical characteristics of the medicinal plant Dracocephalum moldavica in the full bloom stage

Saeideh Alizadeh-salteh; Samaneh Khalaf Khani; parinaz ferdowsi qebchaq

Articles in Press, Accepted Manuscript, Available Online from 23 October 2024

https://doi.org/10.22055/ppd.2024.44445.2116

Abstract

Introduction: Sodium nitroprusside and triacontanol , as plant growth regulators, improve plant growth and development and influence the production of secondary metabolites. Also, Triacontanol, ... Read More Introduction: Sodium nitroprusside and triacontanol , as plant growth regulators, improve plant growth and development and influence the production of secondary metabolites. Also, Triacontanol, as a plant growth stimulant, plays a central role in regulating many biochemical and physiological processes of plants, including photosynthesis. Dracocephalum moldavica L. is a herbaceous, annual and aromatic plant with white and blue flowers from the mint family (Lamiaceae), which is native to Central Asia but has been domesticated in Central and Eastern Europe. Considering the economic importance of Moldavian balm medicinal plant, in this research, it has been tried to investigate the effects of sodium nitroprusside and Triacontanol on the morphological changes and quantitative and qualitative performance of secondary metabolites, especially the yield of essential oil of moldavian balm medicinal plant. Materials and Methods: This investigation was conducted as a factorial experiment based on a completely randomized design with three replications at the Faculty of Agriculture, Tabriz University. The studied factors include foliar spraying of three different concentrations of sodium nitroprusside (0, 0.5 and 1 mM) and tricanthanoltriethanol (0, 0.5 and 1 mM) in the flowering stage. Finally, growth traits (leaf surface and number of lateral stems), shoot yield (fresh and dry weight), essential oil yieldand percentage, biochemical traits (soluble solids, protein, flavonoid and total phenol content) and content of nutrients (nitrogen, phosphorus, potassium and sodium) were examined in full bloom stage. After the measurement of desired parameters, the obtained data were analyzed by SPSS software. Comparison of mean data was done using Duncan's multiple range test. All figures were drawn using Excel software. Results and Discussion: The results obtained in the present study showed that interaction of different concentrations of Tria and SNP had a significant effect on leaf area and the number of lateral branches. Also, SNP at a concentration of 1 mM caused a significant increase in the fresh and dry weight of shoots in the plant. Total soluble solids were significantly affected by different concentrations of Tria. Foliar spraying of Tria and SNP had significant effects on the nutrients content of leaf tissue and the highest increase was recorded at a concentration of 1 mM. Also, foliar spraying of SNP alone and together with Tria had a significant effect on the content of phenol, flavonoid and total soluble protein at the level of 1%, and the treatment of 1 mM SNP with 1 mM Tria caused an increase of 62.93, 51.24 and 34.92% compared to the control treatment, respectively. According to the results, the treatment of 1 mM Tria with 1 mM SNP had the greatest effect on the yield of essential oil and increased the essential oil yield of Moldavian Balm plant by 207% compared to the control treatment. Conclusion: The results of this study showed that the use of sodium nitroprusside and triacantanol with the appropriate concentration had significant effects on the growth and yield of the Moldavian Balm plant, and the treatment of 1mM triacantanol + 1mM sodium nitroprusside was introduced as the optimal treatment in this study.

View Article

Research Paper - Plant Breeding

Identification of superior bread wheat genotypes using composite indices for cultivation in warm regions

Ali reza askari kelestani; Seyed Mahmoud Tabib Ghaffary; Hassan Zali; Mohsen Esmaeilzadeh Moghadam

Articles in Press, Accepted Manuscript, Available Online from 23 October 2024

https://doi.org/10.22055/ppd.2024.46831.2163

Abstract

Abstract Wheat (Triticum aestivum L.) is a socioeconomically important crop in Iran. Improving genetic gain of quantitative traits through selection is at the core of every successful ... Read More Abstract Wheat (Triticum aestivum L.) is a socioeconomically important crop in Iran. Improving genetic gain of quantitative traits through selection is at the core of every successful breeding program. Identification of high-yielding genotypes with high desirable growth traits is one of the most important goals in barley breeding programs. However, the aim of the present study was to select bread wheat superior genotypes based on grain yield and some morpho-phenological traits and finally to compare different indicators using selection index of ideal genotype (SIIG), multi-trait genotype-ideotype distance index (MGIDI) and ideotype design via best linear unbiased prediction (FAI-BLUP). Materials and methods To identify superior genotypes of bread wheat for cultivation in the warm and dry conditions in the southern regions in the Fars province (Darab) and Safiabad-Dezful, an experiment was carried out in the cropping year of 2022-2023 as an augment design with 6 incomplete blocks and three control Sarang, Mehrgan and Barat. plant height (PLH), number of days to heading (DHE), number of days to maturity (DMA), thousand kernel weight (TKW), seed filling rate (SFR), seed filling period (SFP) and grain yield (YLD) were determined. The genetic parameters were estimated using the restricted maximum likelihood (REML). After collecting experimental data, statistical analyses were computed using SAS and R softwares. Results and Discussion The results of the likelihood ratio test (LRT) showed that the genotype effect was significant at the 1% probability level for PLH, DHE, DMA, SFR, SFP and YLD (except TKW). The values of heritability for all measured were, so that the highest and lowest values were estimated for the PLH (0.879) and SFR (0.124), respectively. These results and the heat map of traits, reveal the existence of a genetic diversity among the wheat genotypes. Also, the general heritability of genotypes varied from 0.124 (SFP) to 0.879 (PLH). In Darab region, SIIG index was superior and in Dezful region and the average of two regions, FAI-BLUP index was superior to other indices. The FAI-BLUP selection index has been used on average in Darab, Dezful, and the average of the two regions to select genotypes with a higher number of desired traits through differential selection. In addition to differential selection, the correlation between traits with these indices has shown that the FAI-BLUP selection index had a significant correlation with a greater number of traits compared to the other two selection indices. In Darab, SIIG index introduced G5, G36 and G42 genotypes as supeior genotypes. In Dezful, the FAI-BLUP index introduced the G26, G30 and G37 genotypes as the best genotypes and for the average of the two regions, the G30, G35 and G36 genotypes were introduced as best genotypes using the FAI-BLUP index. Conclusion In general, the results of different indices showed that in the conditions of this study, FAI-BLUP index was superior to other indices. Finally, the results of the two-dimensional graph of the selection indices and grain yield showed that genotypes G50, G52, and G60 can be considered as the superior genotypes for cultivation in bread wheat preliminary experiments in Darab and Dezful regions.

View Article

Research Paper

The effect of plant density on agronomic and physiological traits of different corn lines in the north of Khuzestan province

Gholamhosein Eslamnia; Mohammad Reza Moradi Telavat; SeyedAtaollah Siadat; Khalil Alami-Saeid; Ali akbar Saneinejad

Articles in Press, Accepted Manuscript, Available Online from 23 October 2024

https://doi.org/10.22055/ppd.2024.47210.2179

Abstract

Fodder corn varieties are divided into three classes including: I. early varieties with a life period of less than 85 days, II. medium varieties with a life period between 85-135 days ... Read More Fodder corn varieties are divided into three classes including: I. early varieties with a life period of less than 85 days, II. medium varieties with a life period between 85-135 days and late varieties with a life period of more than 135 days. Optimum planting density is one of the important factors to achieve the highest yield according to the climatic conditions of each region and especially the cultivated cultivars..Commercial varieties of corn for cultivation in different regions of the world for the production of seeds and fodder include hybrid varieties that are supplied annually by seed production companies for planting in farmers' fields. Therefore, investigating the growth, performance and physiological adaptation characteristics of corn lines in different management and agricultural conditions can lead to the identification of optimal management of the desired lines for the production of corn hybrids. Therefore, in order to investigate the ecophysiological responses of different corn lines to the planting density in the north of Khuzestan, an experiment was conducted in the summer of 2018 and 2019 at the Agriculture and Natural Resources Research and Training Center in Safiabad, Dezful, Khuzestan province. This research was conducted as a two-factor factorial experiment in the basic design of randomized complete blocks with three replications. In this experiment, plant density (60, 78 and 110 thousand plants per hectare) as the first factor in the main plots and genotypes (lines SD-95-11, C3-95-5, C3-95-15, C4-95-2, C4-95-3 and control line MO17) were investigated as the second factor in the sub-plots. The examined traits included leaf area index, leaf specific area, leaf chlorophyll, plant height, yield and yield components, harvest index, and biological yield. The results showed a significant difference between corn lines in response to plant density per unit area of the field. According to the comparison results, the highest seed yield was observed at a density of 110 thousand plants per hectare and line 103 (2115 kg per hectare) and the lowest seed yield was observed at a density of 60 thousand plants per hectare and line 119 (1030 kg per hectare). The results of the statistical analysis obtained from this research showed that the density of 110 thousand plants per hectare in most of the measured traits had the highest value of that trait and was the best planting density for the tested lines. Among the morphological traits affecting plant growth, specific leaf area showed a positive and significant correlation with biological performance and grain yield. Also, line number 103 was selected as the best line that can be used in the corn improvement program in hot and dry regions of the country. Achieving the appropriate density in corn lines can be very important for individuals or companies that are active in the field of seed production, because in this field pure maternal and paternal lines are used. On the other hand, among the 6 lines used, line number 103 was selected as the best line that can be used in the corn improvement program in hot and dry regions of the country.

View Article

Research Paper - Medicinal Aromatic Plants

Effects of different levels of humic acid and limitation in irrigation on the growth and functional characteristics of the medicinal plant Lallemantia iberica L.

Masoud Fattahi; Akbar Saljoghi

Articles in Press, Accepted Manuscript, Available Online from 23 October 2024

https://doi.org/10.22055/ppd.2024.47380.2190

Abstract

Introduction Humic acid is a principal component of humic substances, which increasing cell membrane permeability, increasing photosynthesis and respiration rates, enhancing mineral ... Read More Introduction Humic acid is a principal component of humic substances, which increasing cell membrane permeability, increasing photosynthesis and respiration rates, enhancing mineral uptake and enhancing protein synthesis. The effects of Humic acid on the physiological and photosynthetic characteristics of plants under drought stress have been, including the growth parameters, osmotic regulation, antioxidase activity (such as the superoxide dismutase, peroxidase, and catalase) and photosynthesis parameters. Also, drought stress is one of the most important abiotic stresses that adversely influences the growth and production of crops and disturbs plant water relationships, reducing leaf size, root growth and root multiplication. Plants exhibit various physiological and biochemical responses to drought stress at cellular and whole organism levels. The results of some study indicated that the appropriate concentration of humic acid could effectively alleviate the damage of drought stress on plants. Materials and Methods In order to investigate the effect of drought stress on germination characteristics, as well as the effect of different levels of humic acid and water deficit on some characteristics of the medicinal plant of lallemantia, two experiments were conducted. In the first experiment, the characteristics of germination of lallemantia under the influence of five levels of drought stress including 0 potential, -0.4, -0.8, -1.2 and -1.6 MPa in the form of a completely randomized design with 4 replications in the laboratory of the Faculty of Agriculture Shahrekord University was evaluated. In the second experiment, in order to investigate the different levels of humic acid and water deficit stress on some characteristics of the lallemantia, a field experiment was conducted in the form of a split plot in the form of a completely randomized block design in three replications. The treatments included four irrigation levels of 50, 70, 90 and 110 mm evaporation, from the evaporation pan surface as the main factor and four humic acid levels of 0, 5, 10 and 15 liters per hectare as secondary factors. Results and Discussion The results showed that the percentage and speed of germination and fresh weight of lallemantia seedlings decreased due to drought stress levels and the root length increased. Also, in the results of the field experiment, it was observed that the number of flowers, inflorescences, seeds per plant, seed yield, and the amount of biomass were affected by the simple effects of drought stress and humic acid treatments, and drought stress decreased them, while the use of humic acid increased them. As a result of drought stress, the percentage of mucilage increased and the yield of essential oil decreased. Also, the use of humic acid increased the yield of essential oil compared to the control. In general, the use of humic acid, especially at a concentration of 15 liters per hectare, increased the seed yield and the medicinal properties of the lallemantia plant. In general, the use of humic acid, especially at a concentration of 15 liters per hectare, increased the seed yield and the medicinal properties of the lallemantia plant. Conclusion humic acid is an alicyclic ring, and a hydrophilic group, such as a carboxyl group, a hydroxyl group, or a carbonyl group is bonded to enhance the water retention of the plant. Humic acid can be used directly on plants at low concentrations to enhance plant growth, yield and nutrient uptake, thus constituting a popular category of plant biostimulants. Our findings further illustrated that humic acid can relieve the damage of drought stress because humic acid also has the effect of stabilizing the plasma membrane system by increasing the activity of antioxidant enzymes and participating in cell osmotic regulation. Our findings may help to elucidate of the effects of humic acid on lallemantia plant under drought stress and provide substantial guidance for the use of humic acid in agricultural production.

View Article

Research Paper - Legume

Effect of silicates and their dissolving bacteria on growth and yield of guar (Cyamopsis tetragonoloba (L.) Taub.)

Samira Karami

Articles in Press, Accepted Manuscript, Available Online from 23 October 2024

https://doi.org/10.22055/ppd.2024.47097.2176

Abstract

Introduction Guar can form a symbiotic relationship with some strains of bradyrhizobium bacteria but in a weak way. Therefore, achieving a stronger symbiosis in the guar is important. ... Read More Introduction Guar can form a symbiotic relationship with some strains of bradyrhizobium bacteria but in a weak way. Therefore, achieving a stronger symbiosis in the guar is important. Previous studies in some legumes, which do not include guar, show that the legume-bacterium symbiosis can be improved by applying silicates in the soil due to the uptake of silicon, which results in an improved yield. Since the production of silicates is expensive in the industry, recently, some studies focused on the ability of silicate-dissolving bacteria to dissolve silicates present or applied in the soil. Previous studies in some crops show that the soil inoculated with silicate-dissolving bacteria dissolves silicates present and used in the soil, resulting in an improved yield due to the better uptake of silicon and even other nutrients. The present study aimed to investigate the affectability of guar-bacterium symbiosis from soil application of various silicates (Na2SiO3, K2SiO3, Ca2SiO3, and Mg2SiO3) and soil inoculation with silicate-dissolving bacteria. Materials and Methods A pot experiment was performed on the campus of Bu-Ali Sina University in 2022 as a two-factor factorial (2×5) based on a completely randomized design with 10 replications. The first factor included the silicate type in five levels: control, Na2SiO3, K2SiO3, Ca2SiO3, and Mg2SiO3. Silicates were used at 100 mg/kg of soil. The second factor included soil inoculation with a commercial silicate-dissolving bacteria in two levels: 0 and 10 ml/kg of soil. Sixty days after planting, plants of half replications were harvested to measure shoot and root dry weight, nodule number and dry weight, shoot and root nitrogen content, and shoot silicon content. When 80% of the pods turned brown, plants of the other half replications were harvested to measure 100-seed weight, seed yield per plant, and seed gum content. Results and Discussion Based on our observations, guar seedlings grew faster in the pots treated with silicates. Except for seed gum content, other traits were affected by simple and interaction effects between factors. When silicates were not used, the root dry weight and 100-seed weight of guar were not affected by silicate-dissolving bacteria. While it increased the nodule number (34%), nodule dry weight (75%), shoot dry weight (42%), silicon content (16%), shoot nitrogen content (15%), root nitrogen content (41%), and seed yield per plant (25%). When the soil was not inoculated with silicate-dissolving bacteria, the application of all silicates significantly and equally increased silicon content in the guar’s shoot. Also, the co-combined application of silicates and silicate-dissolving bacteria resulted in greater silicon content in guar’s shoot. The highest silicon content (550.1 mg/kg of dry weight) was observed with K2SiO3 + silicate-dissolving bacteria. Conclusion The existence of a synergistic effect of the use of silicates and their dissolving bacteria on the investigated traits of guar was observed, which can cause more effective use of silicates in farms. Although the application of silicates and their dissolving bacteria did not affect the seed gum content, the result of increasing the seed yield per plant is the increase in gum production per plant.

View Article

Research Paper

The effect of 24-Epibrassinolide foliar application on enzymatic and non-enzymatic defense system and yield of pinto beans (Phaseolus vulgaris L. cv. Pinto) under Low irrigation stress

Sulmaz Samfar; Hojatollah Latifmanesh; ali Moradi; Hamid Alahdadi; Amin Mirshekari

Articles in Press, Accepted Manuscript, Available Online from 23 October 2024

https://doi.org/10.22055/ppd.2024.47285.2184

Abstract

Introduction: Beans (Phaseolus vulgaris L.) are among the most valuable and strategic legumes, both in Iran and globally, primarily due to their high protein content and nutritional ... Read More Introduction: Beans (Phaseolus vulgaris L.) are among the most valuable and strategic legumes, both in Iran and globally, primarily due to their high protein content and nutritional benefits. In recent years, the growing global demand for protein-rich foods has further underscored the importance of bean cultivation. However, the economic consequences of the water shortage crisis present significant challenges to food production and security worldwide. This issue is particularly critical in Iran, where the geographical landscape is situated along the global desert belt, resulting in limited rainfall—less than one-third of the worldwide average. As water scarcity intensifies, it becomes essential to explore sustainable agricultural practices that can enhance crop resilience and yield. Brassinosteroids, a group of plant growth regulators, have emerged as a promising solution. These compounds positively influence the physiological activities of crops, improving their growth characteristics and enabling better responses to environmental stresses, such as drought. Moreover, research has shown that brassinosteroids can directly correlate with increased plant yield, making them a valuable tool for farmers. This study aims to evaluate the effects of foliar application of brassinolide hormone under low irrigation conditions on various physiological characteristics and grain yield of pinto beans. By examining these relationships, we hope to provide insights that could lead to more sustainable bean production practices in arid regions. Materials and methods: This study aimed to examine certain physiological parameters and the potential for increasing seed yield in common beans through the application of 24-epibrassinolide under low irrigation stress conditions. The experiment was conducted using a split-plot design within a randomized complete block design with three replications, in a farm located in eastern Shiraz during the 2022 growing season. The irrigation regime was applied at three levels: full irrigation (100% of the moisture requirement) and low irrigation stress at 80% and 60% of the moisture requirement, as the main factor. Four concentrations of 24-epibrassinolide, including control (distilled water), 0.05, 0.1, and 0.2 mg per liter, were applied as the subplot factor. Results and Discussion: The results revealed that both low irrigation stress and the application of 24-epibrassinolide had significant effects on all traits examined. Applying 24-epibrassinolide at a concentration of 0.2 mg per liter led to increases in the chlorophyll index and relative water content of the leaves by 7.42% and 11.77%, respectively, compared to the control treatment (without the hormone). Significant interactions between the irrigation regime and hormone application were observed, where at the 60% and 80% moisture requirement levels, the application of 0.2 mg per liter of 24-epibrassinolide increased the activity of antioxidant enzymes, such as catalase, peroxidase, and superoxide dismutase by 172%, 105%, and 0.35% and by 131%, 115%, and 0.45%, respectively, compared to the control. Similarly, the highest concentration of the hormone at 100%, 80%, and 60% of the water requirement resulted in increases in seed yield by 72.38%, 56.02%, and 44.35%, respectively, compared to the control. Conclusion: Based on the findings of this study, the application of 24-epibrassinolide at a concentration of 0.2 mg per liter is recommended as an effective strategy to reduce reactive oxygen species, prevent cell wall damage, and minimize macromolecule degradation. This approach ultimately leads to improved seed yield in beans, even under varying irrigation conditions, including both full and low irrigation scenarios (60% and 80% of the plants' water requirements). By mitigating the adverse effects of water stress, this treatment offers a promising solution for enhancing bean production in water-scarce environment

View Article

Research Paper

Evaluation of seed germination, visual quality, and morpho-physiological characteristics of several turfgrasses native to Iran

Sahar Mirzaei; Somayeh Esmaeili

Articles in Press, Accepted Manuscript, Available Online from 23 October 2024

https://doi.org/10.22055/ppd.2024.47889.2202

Abstract

Introduction Native turfgrasses are highly important and valuable due to their higher tolerance to environmental stresses and the need for low maintenance, and after establishment, ... Read More Introduction Native turfgrasses are highly important and valuable due to their higher tolerance to environmental stresses and the need for low maintenance, and after establishment, they need less irrigation and fertilization than imported species. Turf grass species with low maintenance ability and at the same time maintaining acceptable quality by reducing management costs, especially mowing and adverse environmental effects, have been receiving more attention from lawn managers today. The primary aim of this study is to assess eight native turfgrass genotypes based on seed germination, visual quality, morpho-physiological traits, and tolerance to wear. Furthermore, the final goal is to identify top-performing genotypes that match breeding objectives, facilitating the development of advanced turfgrass cultivars that can replace foreign varieties. These innovative cultivars are meant to be showcased to urban green space managers and suburban planners as acclimated alternatives. Materials and Methods Eight native turfgrass species including (Lolium perenne, Festuca arundinaceae, F. ovina, F. rubra, Agropyron cristatum, A. intermedium, Poa pratensis and P. trivialis) are collected from from different areas of Iran. The seed germination indices, establishment speed, visual quality, growth characteristics and chlorophyll content were evaluated. Seed germination percentage For germination, Petri dishes were used for 15 days in the germinator at a temperature of 25 ± 2 OC, 513 µmol m-2, a photoperiod of 12 h light/12 h darkness, and a relative humidity of 60%. Germination percentage and seed germination rate was done according to the method (Maguire, 1968). For measuring the height, samples were taken from each experimental unit and the height of the grass was measured with a ruler during the experiment. In order to measure tillering, samples were taken from each experimental unit and the number of tillers created in each plant during the experiment was counted. Among the genotypes in question, the appearance quality was measured by the observation method with scoring from 1 to 9 based on color, density, and uniformity, where the number 1 represents the worst and the number 9 represents the best quality (Morris and Sheerman, 2000). Artificial footing is done periodically on half of each main plot by a footing tension device. The amount of stress applied by the simulator is equivalent to the injuries caused by playing three football matches on grass per week (Canaway, 1976). Then, the wet and dry weight of the grass was measured using a digital scale. The amount of chlorophyll (mg of chlorophyll per gram of plant tissue) was calculated by the method of (Maxwell and Johnson, 2000). Comparison of data values was also done using Duncan's multi-range test and as a result 5% and 1% probability using SAS9.2 software. Results and Discussion The results showed that L. perenne turfgrass genotype showed the highest rates in terms of seed indices such as germination percentage and seed germination rate compared to other genotypes. In addition, in terms of visual quality, height, tillering, shoot fresh and dry weight and chlorophyll content, compared to other genotypes, it showed higher scores and values. Although there was no significant difference with the native genotype of F. arundinacea in most of the measured characteristics. In addition, Pearson's correlation coefficient analysis showed that there is a strong and positive correlation between seed germination rate and all measured characteristics (r≥0.94). This indicates that, in addition to the quantitative traits, the qualitative traits of the seed are also important in the establishment rate, visual quality, amount of chlorophyll and other growth characteristics in turfgrasses. Conclusion It can be concluded that the native turfgrasses of L. perenne and F. arundinaceae can replace foreign turfgrasses and be used in urban green spaces. Also, other studied turfgrasses such as Agropyron spp. are recommended in suburban spaces and low-maintenance environments. Overall, the findings indicate that Iran has the capacity to enhance turfgrass germplasm resources, develop breeding programs, and cultivate compatible varieties by leveraging promising local turfgrass genotypes.

View Article

Research Paper - Horticulture

The effect of foliar application of glutamic acid, aspartic acid, and nicotinic acid on the growth, yield, and morpho-physiological and biochemical characteristics of fenugreek (Trigonella foenum-graecum L.)

Sepideh Dalvand; Hasan Mumivand; Bahman Zahedi; Abdollah Ehtesham Nia

Articles in Press, Accepted Manuscript, Available Online from 23 October 2024

https://doi.org/10.22055/ppd.2024.47919.2204

Abstract

Introduction Biostimulants, such as amino acids and nitrogen-containing compounds, play a vital role in the biochemical and physiological processes of plants. These molecules serve ... Read More Introduction Biostimulants, such as amino acids and nitrogen-containing compounds, play a vital role in the biochemical and physiological processes of plants. These molecules serve as precursors and raw materials for the production of other essential compounds and are crucial for the regulation and control of cellular activities and various biological systems. Amino acids and nitrogen-containing compounds are essential for optimal plant growth and development, and improving nitrogen nutrition and amino acid management can enhance plant growth, yield, and resilience to environmental stresses. Foliar application of amino acids and nitrogen-containing biostimulants helps plants channel more of their stored energy into growth, development, and overall quality. Materials and Methods This study aimed to investigate the effects of amino acid and nitrogen-containing biostimulants on the growth, performance, and morpho-physiological and biochemical characteristics of fenugreek at Lorestan University. The experiment was conducted using a completely randomized design with 10 treatments and three replications. The treatments included a control (spraying with distilled water) and foliar applications of aspartic acid, glutamic acid, and nicotinic acid, each at three levels (75, 150, and 300 mg/L). The first foliar application was performed during the 4 to 6 leaf stage, with subsequent applications every 14 days (for a total of 4 applications). Results and Discussion The results indicated that applying nicotinic acid and aspartic acid at a concentration of 300 mg/L significantly increased plant height. Foliar application of all three biostimulants at concentrations of 150 and 300 mg/L resulted in a significant increase in leaf area and fresh weight of root. The application of nicotinic acid and aspartic acid also led to a significant increase in the fresh weight of the plant. However, the positive effect of nicotinic acid on plant fresh weight was greater than that of aspartic acid. Nicotinic acid treatment at all three levels increased the dry weight of plant. Foliar application of glutamic acid and aspartic acid at concentrations of 150 and 300 mg/L also increased the dry weight of plant. However, root dry weight increased only with concentrations of 150 and 300 mg/L of nicotinic acid and aspartic acid, and 300 mg/L of glutamic acid. Foliar application of all three compounds—glutamic acid, nicotinic acid, and aspartic acid—resulted in significant increases in chlorophyll a, chlorophyll b, and total chlorophyll. The most positive effect on chlorophyll was observed with aspartic acid application. Carotenoid levels were also significantly increased with the application of nicotinic acid and aspartic acid compared to the control, while glutamic acid only increased carotenoids at the highest concentration. Photosynthesis rate, stomatal conductance, CO2 concentration under the stomatal chamber, and total nitrogen were significantly increased with the foliar application of all three compounds—glutamic acid, nicotinic acid, and aspartic acid. Conclusion The results of the present study showed that the application of biostimulants such as nicotinic acid, aspartic acid, and glutamic acid generally led to improvements in the studied characteristics. Overall, it can be concluded that the use of biostimulants, particularly nicotinic acid and aspartic acid (especially at a concentration of 300 mg/L), is recommended for improving the growth, performance, and morpho-physiological traits of fenugreek.

View Article

Research Paper - Tissue Culture

Investigation of the concentration and composition of various phytohormones in the efficiency of micropropagation of Stevia rebaudiana Bertoni

Atefeh Amini Neisiani; Abbas Saidi; Masoud Tohidfar

Articles in Press, Accepted Manuscript, Available Online from 23 October 2024

https://doi.org/10.22055/ppd.2024.47365.2187

Abstract

Introduction Stevia rebaudiana Bertoni is a medicinal plant commercially used as a non-caloric sweetener for diabetic patients. However, the seeds of Stevia are small, infertile, and ... Read More Introduction Stevia rebaudiana Bertoni is a medicinal plant commercially used as a non-caloric sweetener for diabetic patients. However, the seeds of Stevia are small, infertile, and exhibit a relatively low germination rate. Cross-pollination in this plant, combined with the variability in steviol glycoside content and morphological characteristics (such as leaf shape and color), leads to high diversity among the plants grown from seeds. Consequently, asexual propagation methods are vital for the effective cultivation of this plant. Micropropagation not only enhances growth and reproduction rates but also preserves genetic resources. It allows for the creation of a genetically homogeneous population with high yields of steviol glycosides, making it a suitable method for the propagation of Stevia. This study aims to optimize a micropropagation method for Stevia rebaudiana and to investigate the effects of various growth regulators on this plant. Materials and Methods In this study, the germination rate of Stevia seeds was calculated at four and eight days after sowing in MS culture medium. Shoot induction was assessed using three hormonal combinations: kinetin (KIN), gibberellic acid (GA3), and benzylaminopurine (BAP). Following shoot induction, the samples were evaluated for rooting using three different auxin hormones: naphthaleneacetic acid (NAA), indole-3-acetic acid (IAA), and indole-3-butyric acid (IBA). The acclimatization of the samples was conducted after rooting. Results and Discussion The germination rate of Stevia seeds was found to be 33.38%. The highest number of leaves and lateral branches were observed in the treatment with 0.5 mg/L BAP and 2 mg/L KIN. The maximum fresh weight (437.29 g) and shoot length (15.38 cm) were obtained in the treatment with 1.5 mg/L GA3 and 2 mg/L KIN. There were significant negative correlations at the 1% probability level between the number of leaves and shoot length (-0.61**), the number of leaves and fresh weight (-0.46**), the number of lateral branches and shoot length (-0.81**), and the number of lateral branches and fresh weight (-0.69**). Positive significant correlations were found between the number of leaves and the number of lateral branches (0.95**) and between shoot length and fresh weight (0.98**). The longest root was observed in the treatment with 0.5 mg/L NAA, and the highest number of roots was found in the treatment with 1 mg/L IBA. The study highlights the effectiveness of using specific combinations of growth regulators for the micropropagation of Stevia rebaudiana. The findings indicate that the hormonal treatments significantly affect various growth parameters, including leaf number, shoot length, fresh weight, and root development. The negative correlations between some traits suggest that optimizing one growth parameter might compromise. The positive correlations between other traits, such as the number of leaves and lateral branches, suggest that some growth attributes can be simultaneously enhanced. Conclusion The protocol developed in this study for the micropropagation of Stevia rebaudiana (0.5 mg/L BAP and 2 mg/L KIN for shoot proliferation, and 0.5 mg/L NAA for root induction) demonstrates superior performance in a shorter time with fewer and less diverse hormones compared to other micropropagation protocols. Therefore, it can be considered an economical and efficient protocol for the propagation of Stevia, potentially benefiting commercial cultivation and research applications.

View Article

Research Paper - Biotic and Abiotic Stress

Effect of humic acid and seaweed extract application on some biochemical traits of quinoa (Chenopodium quinoaWilld.) in the condition of interruption of irrigation in two places of Kermanshah province

Ghobad Mohamadpoor; salim farzaneh; saeed khomari; seyedeh yalda Raeisi Sadati; Raouf Seyed Sharifi; Behrooz Smaielpoor; kianoosh azashab

Articles in Press, Accepted Manuscript, Available Online from 02 December 2024

https://doi.org/10.22055/ppd.2024.46890.2168

Abstract

Introduction: Due to its high protein content, the balance of essential amino acids such as lysine and plant tryptophan with great nutritional value, quinoa can be a suitable substitute ... Read More Introduction: Due to its high protein content, the balance of essential amino acids such as lysine and plant tryptophan with great nutritional value, quinoa can be a suitable substitute for rice, so the development and cultivation of this product is very important. Since our country is located in an arid and semi-arid region and the amount of evaporation and transpiration is higher than the amount of rainfall, the planted crops suffer from drought stress especially at the end of the season, so the use of natural fertilizers such as seaweed extract and humic acid can be suitable in adjusting the effect of stress. Materials and Methods: This experiment was conducted in order to evaluate some biochemical indices of quinoa under the condition of irrigation interruption in two locations with hot climate (Qasar Shirin) and cold climate (Dalaho) in Kermanshah province in it was implemented as a split plot in the form of a randomized complete block design in the 2018-2018 crop year. The main plots of irrigation treatment were at three levels (complete irrigation, stop irrigation at the beginning of flowering and the beginning of seeding) and the sub-plots of foliar spraying at five levels of seaweed extract at two levels (2.5 g/L and 3.57 g/L), humic acid at two levels (3.75 g/L and 5 g/L) along with a control treatment (solution spraying with pure water).. Results and Discussion: The results showed that stopping irrigation caused a decrease in the concentration of photosynthetic pigments chlorophyll a, chlorophyll b and carotenoid, the amount of protein and the relative water content of quinoa plant leaves compared to full irrigation. Also, under stress conditions, proline content and electrolyte leakage from the cell membrane, the activity of antioxidant enzymes superoxide dismutase, catalase and peroxidase increased. The use of seaweed extract and humic acid reduced the effect of irrigation interruption, so that the highest amount of chlorophyll a (1.760 mg/g), chlorophyll b (0.989 mg/g), carotenoid (0.291 mg/g), protein (1.40 mg/g) and the relative water content in foliar application was 3.75 g/L of seaweed extract. The effects of interruption of irrigation were greater in Qasr-Shirin hot location and the greatest effect of drought stress was observed in the phase of interruption of irrigation at the beginning of flowering. Conclusions: In general, these findings showed that foliar spraying with seaweed extract and humic acid can be used as an efficient and environmentally friendly strategy to reduce the adverse effects of irrigation interruption on Koshia plant. Conclusions: In general, these findings showed that foliar spraying with seaweed extract and humic acid can be used as an efficient and environmentally friendly strategy to reduce the adverse effects of irrigation interruption on Koshia plant.Conclusions: In general, these findings showed that foliar spraying with seaweed extract and humic acid can be used as an efficient and environmentally friendly strategy to reduce the adverse effects of irrigation interruption on Koshia plant.Conclusions: In general, these findings showed that foliar spraying with seaweed extract and humic acid can be used as an efficient and environmentally friendly strategy to reduce the adverse effects of irrigation interruption on Koshia plant.

View Article

Research Paper - Agroecology

The effect of Thiobacillus spp. and bentonite sulfur application on the seed yield and physiological characteristics of safflower (Carthamus tinctorius L.) under different irrigation regimes

Hamid Alahdadi; Alireza Yadavi; Mohsen Movahedi Dehnavi; Hamidreza Balouchi

Articles in Press, Accepted Manuscript, Available Online from 02 December 2024

https://doi.org/10.22055/ppd.2024.47066.2174

Abstract

Abstract Introduction: Safflower (Carthamus tinctorius L.) is a multipurpose plant with medicinal and oil applications, primarily cultivated for edible oil and industrial dyes. Water ... Read More Abstract Introduction: Safflower (Carthamus tinctorius L.) is a multipurpose plant with medicinal and oil applications, primarily cultivated for edible oil and industrial dyes. Water resource limitations in Iran and drought stress negatively affect the growth and performance of this plant. Sulfur, as the fourth most consumed nutrient for plants, plays a vital role in photosynthesis and cell membrane structure. Excessive use of chemical sulfur fertilizers can lead to soil salinity. Therefore, bio-fertilizers have been proposed as a suitable alternative. Thiobacillus spp. bacteria help improve plant growth by providing sulfate and enhancing soil properties. Materials and methods: This study was conducted to evaluate the effect of chemical and biological sources of sulfur, including bentonite sulfur and Thiobacillus bacteria, on the content of elements (N, P, K, S, Fe and Zn) of aerial organs, some physiological characteristics, and the seed yield of safflower under water stress conditions in the summer of 2023 in the research farm of Yasouj University Faculty of Agriculture located in Dashtrom. The experiment was performed as a split factorial based on a randomized complete block design with three replications. Irrigation regimes at three levels (complete irrigation and interruption of irrigation from the beginning of flowering and the beginning of seed filling) were the main factor, and the combination of bentonite sulfur fertilizer at three levels (0, 150, and 300 kg/ha) and Thiobacillus bacteria at two levels (use and non-use) were the secondary factors studied. Results and discussion: Statistical analysis showed that bentonite sulfur fertilizer and the use of Thiobacillus bacteria, significantly improved the content of aerial organ elements, physiological traits, and grain yield of safflower under drought stress. Under severe dehydration conditions (cut off irrigation from flowering stage), the highest content of elements of aerial organs, including nitrogen (2.33%), sulfur (0.149%), iron (44 mg/kg), and zinc (25.66 mg/kg), was obtained from the simultaneous application of 300 kg of bentonite sulfur + Thiobacillus bacteria. The triple interaction of irrigation regime × bentonite sulfur × Thiobacillus was also significant for traits such as total chlorophyll content, carotenoid content, total soluble sugars, and activity of antioxidant enzymes catalase and peroxidase. The highest of this these traits in each irrigation regims were observed in application of 300 kg/ha of bentonite sulfur + Thiobacillus. The content of malondialdehyde increased by cutoff irrigation from the stages of flowering and seed filling, but it decreased with the use of bentonite sulfur and Thiobacillus bacteria.The grain yield was also affected by the application of 300 kg/ha of bentonite sulfur + Thiobacillus under full irrigation and medium stress levels, with an increase of 25.28% and 45.54%, respectively. Conclusion: The findings of this research indicate that the application of water stress, particularly from the flowering stage, was associated with a decrease in physiological traits and seed yield of safflower. The application of 150 kg/ha sulfur-bentonite along with Thiobacillus bacteria, in addition to reducing the use of chemical fertilizers and its negative consequences, led to increased nutrient uptake, improved efficiency of biofertilizer, and enhanced seed yield under water stress conditions.

View Article

Research Paper - Olericulture

Optimization of greenhouse cucumber plant and fruit growth in response to foliar spraying of salicylic acid and boric acid

Amirhossein Shahbazi; Seyyed Javad Mousavizadeh; Kambiz Mashayekhi; Ayoub Ghorbani Dehkordi

Articles in Press, Accepted Manuscript, Available Online from 02 December 2024

https://doi.org/10.22055/ppd.2024.47687.2193

Abstract

Abstract Introduction: Cucumber is one of the vegetables that has a large area under greenhouse cultivation in Iran. There are many problems in greenhouse cucumber cultivation, most ... Read More Abstract Introduction: Cucumber is one of the vegetables that has a large area under greenhouse cultivation in Iran. There are many problems in greenhouse cucumber cultivation, most of which is the reduction of water and food absorption due to various environmental stresses, which has a direct effect on the quantitative and qualitative characteristics of cucumber. Meanwhile, salicylic acid acts as a vital regulator as well as a potential tool for product protection and sustainable production. In addition, boron plays a role in the transfer of sugars and hormones, fruit formation, leaf and flower bud formation in plants. Therefore, the main purpose of this experiment is to evaluate the combined effect of salicylic acid and boric acid on Gohar cultivar greenhouse cucumber, which is carried out under soil cultivation conditions on the quantitative and qualitative characteristics of the plant and fruit. Materials and methods: The present study was implemented as a factorial arrangement based on a randomized complete block design in three replications. The first factor was spraying salicylic acid in three concentrations (0, 0.5 and 1 mM) and the second factor was spraying boric acid in three concentrations (0, 2 and 4 mM). After the emergence of the second true leaf of cucumber, foliar spraying was done with an interval of 10 days, and four times of foliar spraying were done in total. Morphological traits such as plant length, number of leaves, single leaf area and petiole length were measured. Leaf biochemical traits such as chlorophyll a, chlorophyll b, total chlorophyll, carotenoid, anthocyanin and fruit quality traits such as total sugar, sucrose, glucose and fructose and finally the number of fruit and yield were measured. Results and Discussion: According to the results, salicylic acid and boric acid had a significant effect on the traits. A higher number of leaves with an average of 47.33 was observed in 0.5 mM salicylic acid and 0 mM boric acid. In 0 mM salicylic acid and 2 mM boric acid, the upper leaf area was recorded as 306.03 cm2. Similarly, the highest amount of total chlorophyll was recorded with 12.11 and 10.8 mgg-1FW, respectively, in 0 and 1 mM salicylic acid along with 2 mM boric acid. The maximum amount of fruit sucrose and fructose was seen with 226.28 and 87.9 mgg-1FW, respectively, in 1 mM salicylic acid and 0 mM boric acid. 1 mM salicylic acid in 2 mM boric acid showed the highest amount of fruit glucose with 368.71 mgg-1FW. The highest number of fruits with 86.33 and the highest total fruit yield with 9.59 kg/plant and 21.10 kg/m2 was obtained corresponding to 0.5 mM salicylic acid in 2 mM boric acid. Likewise, the lowest number of fruits with 44 and the lowest yield with 3.39 kg/plant was recorded in control. Conclusion: By evaluating the obtained results, salicylic acid had a more noticeable effect than boric acid. However, the combination of salicylic acid and boric acid showed a more optimal result than their single application. In general, 0.5 mM salicylic acid in 2 mM boric acid achieved better results in most quantitative and qualitative traits.

View Article

Research Paper - Oil seed

Evaluation of seed yield and water productivity of sesame promising line under different irrigation treatments in Borazjan region, Bushehr province

Majid Gholamhoseini; Davod Kiani; Mehrdad Norouzi; Farnaz Shariati; Gholamreza Ghodrati

Articles in Press, Accepted Manuscript, Available Online from 02 December 2024

https://doi.org/10.22055/ppd.2024.47304.2185

Abstract

Introduction Sesame (Sesamum indicum L.) is an oilseed crop grown for its edible oil in dry and semi-arid conditions worldwide. Because of its minimal input requirements, it is a great ... Read More Introduction Sesame (Sesamum indicum L.) is an oilseed crop grown for its edible oil in dry and semi-arid conditions worldwide. Because of its minimal input requirements, it is a great crop to cultivate in rotation with other crops. In the context of irrigation planning and determining the optimal time to cut-off irrigation at the end of sesame cultivation in the Bushehr region, a major sesame production hub, there has been no research conducted on the available cultivars or newly introduced lines. This study hypothesises that by reducing water availability during non-critical stages of drought tolerance, it may be possible to enhance irrigation water productivity in existing sesame cultivars and lines while maintaining seed and oil yields. To test this hypothesis, the present research was designed and implemented. Materials and Methods The current experiment was carried out in 2022 and 2023 growing seasons at the Agricultural and Natural Resources Research Center fields in Borazjan, Bushehr, Iran. The region is characterized as hot and arid, and the average yearly precipitation (over a 30-yr period), which occurs mostly during the autumn and winter months, is 250 mm for the site. This study investigated the effect of different irrigation regimes—full irrigation (80 mm evaporation) and low irrigation (160 mm evaporation)—and the timing of irrigation cut-off on yield and yield components, seed oil content, oil yield and irrigation water productivity in two sesame genotypes: Dashtestan 2 cultivar and promising line number 7. The cut-off timings were as follows: beginning of flowering, beginning of capsule formation, and mid-capsule formation. A split-split-plot design was used, with irrigation regime as the main plot, irrigation cut-off timing as the sub-plot, and genotype as the sub-sub-plot, arranged within a randomised complete block design with three replications. Results and Discussion As anticipated, the reduction in water availability under the low irrigation regime led to a significant decrease in seed yield components across both genotypes. Results indicated that for the two primary traits determining sesame seed yield—the number of capsules per plant and the number of seeds per capsule—line number 7 outperformed Dashtestan 2 under full irrigation and was less affected by reduced irrigation or earlier irrigation termination. Conversely, Dashtestan 2 had a superior thousand-seed weight. Overall, line number 7 showed a higher average yield than Dashtestan 2 across irrigation treatments, and did not require irrigation beyond the early capsule- formation stage to reach maximum seed yield, leading to water saving of at least 600 cubic metres per hectare without significant yield reduction. While the maximum irrigation water productivity was similar for both genotypes, Dashtestan 2’s efficiency gains were due to lower water use rather than increased yield, whereas line number 7 achieved both water savings and satisfactory yield (733 kg per hectare) with early irrigation cut-off during capsule setting. Although Dashtestan 2 exhibited up to 1.5% higher seed oil content, line number 7 yielded up to 24% more oil yield than Dashtestan 2. Conclusion In conclusion, replacing older sesame cultivars with new lines alongside optimal irrigation management can increase water productivity, reduce water consumption, and prevent yield losses.

View Article

Research Paper - Organic Agriculture

Feasibility and capacity assessment of nano-organo-silica production from rice husk and its characterization

Reza Ebrahimi Gaskarei; Fatemeh nickkhoo shaldehi

Articles in Press, Accepted Manuscript, Available Online from 10 December 2024

https://doi.org/10.22055/ppd.2024.47929.2205

Abstract

Background and purpose: Gilan and Mazandaran produce about 84% of the country's rice. Gilan province has 1805 active rice mills that convert about 700,000 tons of paddy produced ... Read More Background and purpose: Gilan and Mazandaran produce about 84% of the country's rice. Gilan province has 1805 active rice mills that convert about 700,000 tons of paddy produced from 230,000 hectares of paddy fields into white rice every year. In this process, about 20% of the dry weight of paddy, i.e. 140,000 tons of the outer husk of rice remains as waste in the rice milling factories -about 20% of the dry weight of this husk is silica, so from a theoretical point of view, it is possibil to extract 28,000 tons silica from this waste.In the north of the country, the inner husk of rice paddy (soft husk) is used as livestock and poultry feed, but the outer husk of rice paddy (rough husk) contains 70% lignocellulose and 20% amorphous silica and has no nutritional value in livestock and poultry feed. For every ton of rice paddy, 0.2 ton of the outer shell of paddy is left in the rice mills factories. The outer shell of rice husk is the waste of rice mills and about twenty percent of its dry weight is silica in the form of SiO2, which can be extracted and returned to the production cycle espetially in paddy soils. In other words, the annual waste of rice mills can be used to extract silica. The necessity of this research is related to the insufficiency of silicon in the soil of some rice paddy fields in the north of Iran, returning silicon to the rice field and solving the problem of rice milling factory waste. The production of this element from organic waste is a demand-oriented, innovative and technological idea in line with sustainable agriculture. Due to the high price of imported silicon fertilizer and currency and vice versa, the cheap and annual availability of the outer shell of husk, as well as the many uses of silicon in agriculture, industry, medicine and pharmaceuticals, the production of granulated nano-organosilica from this waste with economic and environmental aspects is one of the goals of this applied research. Materials and methods: This research was done in the soil chemistry laboratory in University of Guilan. First, the outer shell of rice husk was obtained as a waste of rice mills from a rice mill factory in rural district of Jiredeh, Shaft city in Guilan and after boiling with hydrochloric acid, it was heated in an electric furnace at a temperature of 700 degrees Celsius so that amorphous nanosilica remains. From the interaction of amorphous nanosilica with potassium nitrate, semi-crystalline nanosilica was obtained. Field emission scanning electron microscopy (FESEM), X-ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FTIR) analyzes were used to identify amorphous nanosilica and semi-crystalline nanosilica. In addition, the production capacity of the outer shell of rice husk from the waste of rice mills in active mills was randomly estimated using a questionnaire. Result: Firstly it has been approved that the silica particles produced from rice husk are nanoparticles secondly the results showed that about 100 grams of nano-organosilica can be produced from every 1000 grams of outer shell of rice husk. Based on this result; the amount of silica that can be produced from rice husk in the country is estimated to be about 90 thousand tons. Conclusion: In line with sustainable agriculture, by extracting silica from the waste of rice mills, the soil silica needed of the rice fields in the north of the country can be supplied.

View Article

Research Paper

Effect of different intensities of continuous red and blue LED light on yield and secondary metabolites synthesis of basil microgreens

Afsaneh Abbasi; Naser Alemzadeh Ansari; Mohammadreza Fayezizadeh

Articles in Press, Accepted Manuscript, Available Online from 10 December 2024

https://doi.org/10.22055/ppd.2024.48202.2220

Abstract

Introduction Basil microgreen (Ocimum basilicum L.) is a valuable plant belonging to the Lamiaceae family, which is known as a superfood in the 21st century due to its high antioxidant ... Read More Introduction Basil microgreen (Ocimum basilicum L.) is a valuable plant belonging to the Lamiaceae family, which is known as a superfood in the 21st century due to its high antioxidant index, including phenolic compounds, flavonoids, and carotenoids. In addition to their antioxidant and nutritional properties, microgreens are introduced as one of the strategic products that can be produced in vegetable production factories due to their short growth period, compatibility with soilless cultivation systems, ability to be cultivated in layered cultivation systems and high profitability. However, there are several challenges facing vegetable producers that hinder the development of microgreen cultivation. One of the most important production parameters is light intensity, the results of which are limited on the performance and synthesis of basil microgreen secondary metabolites in past research. Materials and Methods This research was conducted in the Department of Horticultural Science, Faculty of Agriculture, Shahid Chamran University of Ahvaz, in February 2024. This experiment aims to investigate the effect of different intensities of red+blue continuous LED light with a ratio (1:1) including 18 (82.8 µmol m-2 s-1), 36 (165.6 µmol m-2 s-1), 54 (248.4 µmol m-2 s-1) and 72 (331.2 µmol m-2 s-1) Wm-2s-1 on the yield and synthesis of secondary metabolites of three cultivars (Kapoor, Red Rubin, Violetta) and one genotype (Abloq) of basil microgreen were investigated using a split-plot approach based on a randomized complete block design in a floating system with four replications. Results and Discussion The results showed that the simple effect of light intensity on all studied traits had a significant difference at the 1% level. Also, the simple effect of cultivar and the interaction between light intensity and cultivar on all studied traits created a significant difference. The highest and lowest yield were obtained in Red Rubin cultivar (4.1 kg m-2) with light intensity of 331.2 µmol m-2 s-1 and in Violetta cultivar (0.5 kg m-2) with light intensity of 82.8 µmol m-2 s-1, respectively. The highest antioxidant capacity (78.31%), anthocyanin (31.0 mg 100 g-1 of fresh weight), vitamin C (306.1 mg 100 g-1 of fresh weight) and phenolic compounds (2039.6 mg 100 g-1 of fresh weight) were measured in Ablaq genotype under light intensity of 331.2 µmol m-2 s-1. The highest amount of proline was measured in Red Rubin cultivar (3.61 mg g-1 fresh weight) grown under a light intensity of 331.2 µmol m-2 s-1 and the lowest amount of proline was measured in Ablaq genotype (1.55 mg g-1 fresh weight) under light intensity of 82.8 µmol m-2 s-1. The highest amount of flavonoids was measured in Violetta cultivar (8.42 mg g-1 fresh weight) under light intensity of 331.2 µmol m-2 s-1 and the lowest amount of flavonoids was measured in Red Rubin cultivar (3.45 mg g-1 fresh weight) under light intensity of 82.8 µmol m-2 s-1. Basil microgreen performance with antioxidant capacity, anthocyanin, carbohydrate, proline, vitamin C, total phenolic compounds, and flavonoids had a positive and significant correlation at the 1% level. Conclusion The light intensity of red+blue LED lamps affected the synthesis of secondary metabolites and the yield of basil microgreens. Based on the results of the Ablaq genotype under the light intensity of 331.2 µmol m-2 s-1, it can be used as a suitable method for growing basil microgreens in the floating system.

View Article

Number of Volumes	46
Number of Issues	56
Number of Articles	609
Number of Contributors	1,584
Article View	734,560
PDF Download	363,097
View Per Article	1206.17
PDF Download Per Article	596.22
Number of Submissions	1,238
Reject Rate	57
Acceptance Rate	31
Average Time to Accept (Days)	150
Number of Indexing Databases	4

Volume 47 (2024)

Volume 46 (2023)

Volume 45 (2022)

Volume 44 (2021)

Volume 43 (2020)

Volume 42 (2019)

Volume 41 (2018)

Volume 40 (2017)

Volume 39 (2016)

Volume 38 (2015)

Volume 37 (2014)

Volume 36 (2013)

Volume 35 (2012)

Volume 34 (2011)

Volume 33 (2010)

Volume 32 (2009)

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Indexing and Abstracting

Keywords Cloud