Plant Productions

Research Paper - Plant Breeding

Dissection of genotype × environment interaction and yield stability analysis in durum wheat using SHMM and GGE biplot models

Tohid Najafi Mirak; Manoochehr Dastfal; Manoochehr Sayyahfar; Hossein Farzadi; Shahryar Sasani; Hassan Zali

Volume 47, Issue 2 , August 2024, Pages 161-178

https://doi.org/10.22055/ppd.2024.46214.2144

Abstract

IntroductionDurum wheat (Triticum turgidum L. var. durum) is an important crop for the human diet grown in many parts of the world predominantly for semolina and resulting pasta production. ... Read More IntroductionDurum wheat (Triticum turgidum L. var. durum) is an important crop for the human diet grown in many parts of the world predominantly for semolina and resulting pasta production. The presence of genotype × environment interaction (GEI) is a challenge for breeders in evaluating genotypes in multilocational trials. The use of statistical models such as GGE biplot assist breeders in quantifying and understanding the patterns of GEI and in evaluating the performance of genotypes in various environmental conditions. This allows breeders to select stable and adaptable genotypes for a range of environments. One of the important goals of durum wheat breeding programs is to produce high-yielding cultivars that have suitable characteristics for cultivation in different regions of the country. Therefore, the aim of this research was to select promising durum wheat lines in terms of stability and high grain yield by GGE biplot and SHMM models.Materials and MethodsIn this study, 17 promising lines of durum wheat with three check Hana, Aran, Mehregan in five research centers of Kermanshah, Khorramabad, Karaj, Dezful and Fars (Darab) in the form of randomized complete blocks design in 3 replications and in two cropping seasons (2020-2022) were cultivated and compared. The studied genotypes were planted in six lines along 6 m with a line distance of 15 cm. Seed rate was determined by 450 seeds per square meter considering the thousand kernel weight for each genotype. Seeds were sown using an experimental plot planter (Wintersteiger, Ried, Austria). The fertilizer composition was 32 kg ha-1 nitrogen (twice), and di-ammonium phosphate and potassium sulfate were 100 and 50 kg ha-1, respectively (before planting). After the removal of perimeter plants, all experimental plots were harvested with an experimental grain harvester (Wintersteiger, Ried, Austria).Results and DiscussionThe results of the combined variance analysis of grain yield showed that the differences between the test environments, genotypes and genotype x environment interaction effect are significant at the 1% level. The highest grain yield in the first year was observed in Kermanshah station (Ker1) (8441 kg ha-1) and the lowest seed yield in Khorramabad in the first year (Kho1) (5648 kg ha-1) and Karaj in the second year (Kar2) (5961 kg ha-1). GGE biplot analysis determined two durum wheat environmental groups. The first environmental group contained of Kho1, Dar1, Kar1, Kar2 and Dar2 environments, where the recommended genotypes 18, 17, 2 and 19 produced the highest yields. The second environmental group comprised of Kho2, Dez1, Ker2, Dez2 and Ker1 environments, where genotypes 12, 9 and 8 were the best adapted genotypes. Biplot results showed that genotypes 10, 5, 13, 18 and 16 were more stable than other genotypes, respectively. Comparison of the examined genotypes with the ideal genotype showed that genotypes 18 and 10 are the closest genotypes to the ideal genotype, which in addition to high grain yield, had high yield stability. Dar2 was the closest environment to the ideal environment. The results showed that the classification of environments based on the SHMM model was completely consistent with the GGE biplot model. Based on environmental vector of the biplot, Dar2 and Ker1 had high discriminating ability for the genotypes. Also, Dezful in the first and second year (Dez1 and Dez2), Karaj in the second year (Kar2) and Kermanshah in the second year (Ker2) showed low discriminating ability for genotypes. The environments that were placed in the same group were close to each other in terms of genotype x environment interaction values. Based on the SHMM model, the environments with the least cross over effects are placed in one group. Accordingly, the placement of Kermanshah and Dezful in the same group indicates the relative similarity of these places. Also, these results were confirmed by the GGE biplot model. ConclusionAs a conclusion, GGE biplot identified G10 (DW-99-10) and G18 (DW-99-18) as the superior durum wheat genotypes which that can be released as new commercial cultivars for the temperate and warm regions of Iran.

Research Paper - Agroecology

The impact of conventional, sustainable, and organic farming systems on grain yield and energy use efficiency in sesame (Sesamum indicum L.), mung bean (Vigna radiate L.) and maize (Zea mays L.)

Aram Gorooei; Amir Aaynehband; Afraseyab Rahnama

Volume 47, Issue 2 , August 2024, Pages 179-193

https://doi.org/10.22055/ppd.2020.32356.1871

Abstract

Background and objectiveConsidering the limited natural resources and the negative effects of inappropriate use of these resources on both human health and environment, addressing the ... Read More Background and objectiveConsidering the limited natural resources and the negative effects of inappropriate use of these resources on both human health and environment, addressing the patterns of energy consumption remains vital (Baran and Gokdogan, 2017; Ozkan et al, 2004). Materials and methodsThis study was conducted at the research farm of Shahid Chamran University of Ahvaz in the summer of 2018. Experimental design was split-plot based on randomized complete block design with three replications. Main plots consisted of agriculture production systems; intensive (all inputs e.g., fertilizers, herbicides, and pesticides were chemical), sustainable (a combination of organic and intensive methods were used to manage this farming system), and organic (in this farming system, all inputs were organic and biological, no chemical fertilizers were applied. control of weeds was done mechanically). Sub plots consisted of three crops; corn (cereal), mung bean (legume) and sesame (oil seed). In this study, energy efficiency indices were calculated by measuring the energy equivalent of all inputs and outputs. ResultsResults showed that the highest and lowest grain yields for corn, mung bean and sesame were obtained in the intensive and organic systems, respectively. The lowest (1.18) and highest (3.69) energy use efficiencies were belonged to intensive sesame and organic corn, respectively. The highest amount of energy consumed (34396 MJha-1) was observed in intensive corn and the lowest with the value of 8247 MJ ha-1 was belonged to the organic mung bean. Additionally, intensive corn presented the highest (94045 MJ) output energy. On the other hand, organic mung bean showed the lowest value of the output energy (15279 MJ). Intensive corn and organic sesame had the highest and lowest amounts of net energy indices with the values of 59649 and 7032, respectively. Although corn yield in the organic system was nearly 30 percent lower than in the intensive system, energy consumption for organic corn was 50 percent lower than for intensive cornConclusionTo design an appropriate agroecosystem, it is necessary to consider a collection of agroecological indices e.g., energy use efficiency, net energy, energy utilization index, special energy, as well as crop production history and agricultural culture (human resource productivity index, agrochemical energy, greenhouse gas emission) to find a balance between both factors based on each region.

Research Paper - Horticulture

Effect of UV-B radiation on physiological and phytochemical indices related to cold tolerance in Yaghooti grapes (Vitis vinifera L.)

Ahmad Orooji; Rouhollah Karimi; Alireza Shayganfar

Volume 47, Issue 2 , August 2024, Pages 195-212

https://doi.org/10.22055/ppd.2024.46261.2146

Abstract

Introduction Environmental stresses, especially damage caused by frost, often have a significant effect on plant growth and development. In order to adapt to the cold, plants show ... Read More Introduction Environmental stresses, especially damage caused by frost, often have a significant effect on plant growth and development. In order to adapt to the cold, plants show specific physiological and biochemical responses that lead to an increase in their duirability and survival during exposure to low temperature. The use of ultraviolet (UV) rays to increase cold tolerance and physiological and biochemical changes related to it has been less researched. This is while UV-B is not necessarily a source of stress, but moderate, non-harmful levels of UV-B act as an environmental signal in higher plants and able to induce several key reactions in order to adapt to cold in the plant. Materials and Methods This experiment was carried out on rooted seedlings of Vitis vinifera L. cv. Yaghooti in a factorially (3×3) based on a completely randomized design with three replications in the research greenhouse of Malayer University in the spring and summer of 2022. In the 15-leaf stage, the vines (except for the control) were exposed to two doses of UV-B radiation in the following order: first dose (control): natural light, second dose (moderate): 5.98 kJ m-2 d-1 ( equal to 0.55 W/m2 for 3 hours) and the third dose (severe): 9.66 kJ m-2 d-1 (equal to 0.55 W/m2 for 4.5 hours) was applied to the plants under the natural photoperiod in the greenhouse in June. After applying UV-B radiation treatments, one group of pots was kept in the greenhouse (temperature 24±1 ºC) and another group of pots (control vines and treated with UV-B rays to apply cold stress to the cooling chamber) transferred and placed under the temperature of 4ºC and -4ºC (for 6 hours at each temperature). Results and Discussion According to the results, the highest and lowest total chlorophyll content was related to the treatment without irradiation and temperature of 24°C and the treatment of severe irradiation and temperature of -4°C, respectively. The highest and lowest carotenoid content was related to the severe UV-B irradiation treatment and 24°C temperature and the treatment without irradiation and 24°C temperature, respectively. The relative water content was the highest in the treatments without radiation and temperature of 24°C, and the lowest in the treatment of moderate irradiation and temperature of -4°C. The highest and lowest percentages of electrolyte leakage were observed in treatments without irradiation and temperature of -4°C and treatment without irradiation and temperature of 24°C, respectively. The content of malondialdehyde and hydrogen peroxide was the highest in the vines under severe UV-B irradiation along with (-4°C) and was the lowest in treatment without irradiation along with 24°C. The highest content of soluble sugar and soluble protein was observed in plants treated with severe irradiation along with (-4°C), and the lowest amount of these compounds was observed in the treatment without UV-B irradiation along with (24°C). The content of proline was the highest in the treatments with severe irradiation along with (4°C), and the lowest in the treatment without radiation and temperature of 24°C. The highest and lowest activity of ascorbate peroxidase (APX) enzyme was observed in the treatments of sever irradiation along with (4°C) and moderate irradiation along with (-4°C), respectively. The activities of guaiacol peroxidase (GPX) and catalase enzymes (CAT) were the highest in plants under moderate irradiation along with (4°C), and the lowest activity of these enzymes observed under non-irradiation condition along with (-4°C). The highest and lowest total phenol and flavonoid contents were related to those vines that were treated with sever irradiation along with (4°C) and without UV-B irradiation along with 24°C, respectively. Conclusion Totally, it can be concluded that moderate radiation treatment through the stimulation of antioxidant systems, the accumulation of UV-B absorbing compounds and acclimate osmolytes in the plant led to an increase in their tolerance to chilling temperatures (+4°C), but there was no effect on frost tolerance (-4°C). However, sever UV-B irradiation treatment both at normal and low temperatures caused damage to cell membranes and leaf necrosis. Based on the results of application of moderate dose of UV-B rays, it can be used as an elicitor to improve plant antioxidant system and cell membrane stability under chilling temperature (4°C).

Research Paper - Biotic and Abiotic Stress

Effects of salinity stress on some morpho-physiological traits and grain yield of quinoa cultivars under greenhouse conditions

Mojtaba Kaboodkhani; Hadi Salek Mearaji; Keyvan Aghaei; Afshin Tavakoli

Volume 47, Issue 2 , August 2024, Pages 213-227

https://doi.org/10.22055/ppd.2024.46220.2145

Abstract

IntroductionSince plants cannot move, they face many environmental stresses. Salinity is a major threat to modern agriculture, causing inhibition and impairment of crop growth and development. ... Read More IntroductionSince plants cannot move, they face many environmental stresses. Salinity is a major threat to modern agriculture, causing inhibition and impairment of crop growth and development. Salinity stress affects all vital plant processes such as photosynthesis, protein and metabolism of fat in the plant, causing changes in morphological, physiological, biochemical and molecular functions of the plant, which ultimately decreases plant yield. Due to high nutritional value and high resistance to abiotic stresses such as salinity and drought, quinoa (Chenopodium quinoa willd.) has been proposed to ensure food security in the world. Quinoa genotypes have different morphological and physiological mechanisms in terms of germination, growth and grain yield under salinity stress. Considering the differences in salinity resistance in different quinoa cultivars, this study was carried out for investigating the physiological responses and seed yield of three quinoa cultivars with different origins under salinity stress. Materials and MethodsThis experiment carried out as random complete block design with three replications in the greenhouse of the Faculty of Agriculture of Zanjan University during the year 2019. The experimental treatments included three salinity levels of 0, 15 and 30 dS m-1 and three quinoa varieties (Giza1, Titicaca and Q26) with different origins. First, soil with a ratio of 50% sieved farm soil, 30% sand and 20% rotted manure was added inside the 1 kg pots. Inside each pot, 10 seeds were planted then irrigated with desired concentrations of salinity. The temperature of the greenhouse during the day was 27±2 and at night 19±2 ˚C, and the relative humidity was 65-75%. After the seedlings were fully established, four plants were kept in each pot and the rest were removed. The volume of irrigation water was 400 cc for each pot with the desired concentration of salinity. In the following, the desired traits were measured based on the mentioned protocols in specific stages. After measuring the desired traits, variance analysis of the data was done with SAS software version 9.1, comparison of average data was done using Duncan's multiple range test (P>0.05). Results and DiscussionSalinity stress had a significant effect on all the traits studied except the potassium concentration of the root. Salinity reduced the plant height, leaf area, greenness index, grain yield, dry weight shoot and root, but salinity caused increase in the amount of sodium in the root, stem and leaves. The highest and lowest grain yields, with 0.87 and 0.56 g plant-1 were observed in the control and 30 dS m-1 salinity treatments, respectively. The Titicaca cultivar with 25.7 cm, had the lowest plant height. The highest shoot dry weight, stem sodium concentration, Na+/K+ ratio in root and Na+/K+ ratio in stem were observed in the Giza 1 cultivar. The Q26 cultivar had highest height of plant (33.8 cm), leaf area (3865.8 cm2plant-1), root sodium (0.30 mg.g-1 dry weight) and potassium (0.16 mg.g-1 dry weight) concentration, while it had the lowest Na+/K+ ratio in leaf with 0.67 mg.g-1 dry weight. Traits such as leaf potassium concentration and grain yield were similar among the studied cultivars. Also, cultivar Q26 had the lowest Na+/K+ ratio in the leaves with 0.67 mg.g-1 dry weight. The leaf greenness index in the control and salinity of 15 dS.m-1 was the same among all studied cultivars, but in the salinity of 30 dS.m-1, the Titicaca cultivar had the lowest amount. Among the studied cultivars, Giza 1 cultivar had the lowest root dry weight, while it had the highest Na+/K+ ratio in root and stem (8.27 and 3.6 mg.g-1 dry weight, respectively) among all salinity treatments. The Titicaca cultivar had the highest stem potassium concentration of all salinity levels in studied cultivars. Conclusions The results obtained from this research showed that high salinity concentrations decreased the grain yield of quinoa. In general, the results showed that the cultivars examined in this research (Giza1, Titicaca and Q26) were different from each other in terms of traits related to salinity resistance. The results showed that the origin of cultivars probably plays a role in the resistance to salinity. Also, despite the difference in the concentration of elements potassium, sodium and Na+/K+ ratio in the stem, root and leaf organs, and no significant difference was observed in terms of grain yield among the studied cultivars. Therefore, it is suggested to consider their origin in the selection of cultivars for future research.

Research Paper - Biotic and Abiotic Stress

The effects of biochar on the growth and some physiological characteristics of Artemisia dracunculus L. under salinity stress

Maehdiyeh Safavi; Maedeh Mohammadzadeh; lamia vojodimehrabani

Volume 47, Issue 2 , August 2024, Pages 229-244

https://doi.org/10.22055/ppd.2024.47046.2173

Abstract

Introduction Artemisia dracunculus L. is a perennial fragrant plant which is commonly used as a flavoring vegetable in many countries. The plant is widely used in the food, pharmaceutical, ... Read More Introduction Artemisia dracunculus L. is a perennial fragrant plant which is commonly used as a flavoring vegetable in many countries. The plant is widely used in the food, pharmaceutical, cosmetic, and health industries. The medicinal value of tarragon is due to the presence of essential oil, phenolics and flavonoids, phenolic acids, coumarins, and alkaloids. In the last decade, due to climatic changes, salinity stress has become one of the most important biological problems, which causes a decrease in plant productivity. Salinity stress, by creating water and ionic imbalance, induces drought stress and increases the concentration of vacuolar sap. Moreover, the ionic toxicity and ionic competition in the cell membranes as a result of salt stress leads to programmed cell death. Therefore, it is important to find solutions to overcome or reduce the effects of salinity stress on plants. Biochar is an organic carbonic compound that can affect the physicochemical structure of the soil. Biochar, by increasing the absorption of nutrients, enhances the cation exchange capacity, and water holding capacity in the soil, improves the soil structure, and increases the plant access to the soil nutrients, and in this way helps to enhance the yield of the plant. Materials and Methods To investigate the effects of soil-based biochar (zero, 7, and 14% v) application and, NaCl salinity stress (zero, 75, and 150 mM) on the growth and some physiological traits of Artemisia dracunculus L.; a factorial experiment was conducted based on the completely randomized design with three replications during 2022 in Research Greenhouse of Azarbaijan Shahid Madani University. After adding biochar to the soil mixture, tarragon rhizomes were plantd in the pots. One month later, after complete stablishment of plants, salinity levels were imposed. The plants were maintained in the growing medium for 3 month. Later the plant parts were sampled for the traits measurement. Results and Discussion Plant height, aerial parts dry weight, chlorophyll a, hydrogen peroxide, malondialdehyde, proline, sodium, and potassium content were influenced by the interaction effects of experimental treatments. The treatments without salinity and 75 mM NaCl salinity stress + the application of 14% (v) biochar caused an increase in the plant height and aerial part dry weight of the plant. The highest content of chlorophyll a was obtained in the treatment without salinity stress + both levels of biochar and 75 mM NaCl salinity stress + application of 14% (v) of biochar. The salinity stress )150 mM( in the condition of not using biochar increased the content of hydrogen peroxide, malondialdehyde, and sodium content (35 mg g-1 DW) of the plant. The highest proline content was observed in 150 mM salinity stress with both levels of biochar application and non-application. The highest potassium content was obtained in the treatment without salinity stress with the application of 14% (v) of biochar, which showed a 71% increase compared to the control. The potassium-to-sodium ratio was affected by the main effect of biochar, and the use of 7 and 14% biochar increased the potassium-to-sodium ratio of the plant. The independent effects of salinity stress and biochar affected leaf relative water content, essential oil, chlorophyll b, and carotenoid content. Seven and 14% biochar treatments increased the chlorophyll b content compared to the control. The application of 14% biochar raised the relative water content of leaves (17% increase compared to the control), and carotenoids. By increasing the salinity stress to 150 mM, the leaf-relative water content decreased by 22% compared to the control, and the highest leaf-relative water content was observed in the control. Both 75 and 150 mM salinity stress treatments increased carotenoid content. The top essential oil content was observed in 14% (v) of biochar, which showed a 76% increase compared to the control. 75 mM salinity stress increased the essential oil content as well. 18 components were identified in Artemisia dracunculus essential oil.Estragole (84.3-90.8%) was the dominant component of the essential oil, and the highest content of this compound was obtained in 150 mM NaCl salinity stress + 14% biochar application.The second component in terms of abundance was d-limonene (1.05-3.02%), and the highest content of this compound was observed in the 75 mM salinity stress + 7% (v) of biochar application. Conclusion The overall results showed that 150 mM salinity stress hurts the growth and physiological characteristics of A. dracunculus, but the use of biochar at the rate of 14% improved the growth and physiological characteristics and even enhanced the dominant components content of essential oil under salt stress. .

Research Paper - Olericulture

Improving growth, yield and quality characteristics of greenhouse tomato by using high density fish pond water

Amin Baji; Edris Shabani; Naser Alemzadeh Ansari; Mohamad Albaji

Volume 47, Issue 2 , August 2024, Pages 245-258

https://doi.org/10.22055/ppd.2023.43551.2098

Abstract

IntroductionIran is positioned as the 11th largest producer of tomatoes globally, yielding in excess of 3 million tons. Therefore, providing enough water to produce this amount of product ... Read More IntroductionIran is positioned as the 11th largest producer of tomatoes globally, yielding in excess of 3 million tons. Therefore, providing enough water to produce this amount of product will be one of the challenges of the near future in the agricultural sector due to the drought problem in Iran. Reuse of fish waste in agriculture is one of the important dimensions of water resources planning. Recycling drainage water from aquaculture farms is one of the necessities because it is rich in substances that can be useful in agriculture. World population and food security is one of the most difficult challenges that most of the countries are facing, because the world population is increasing rapidly and will reach 9.6 billion people by 2050. In this situation, the food supply should increase by 70 to 100%. Considering these challenges, it is necessary to conduct applied research to make maximum use of effluents and wastewaters in the production of greenhouse products. Materials and methodsThe treatments of this experiment included 3 types of nutrient solutions (Resh nutrient solution, fish pond water and modified fish pond water) and 3 promising greenhouse tomato lines (AZ4, AZ5 and V4). The experimental design was factorial arranged in complete block design with 3 replications. At the end of the experiment, the plants were removed from the pot and the roots, leaves and stems were separated from each other. Their fresh and dry weight and the number of leaves were recorded separately for each treatment. To check yield indicators, ripe tomato fruits were harvested during the growth period, counted and weighed with a scale with an accuracy of 0.01 g. The firmness of the fruit tissue was measured by a firmness meter, and the pH and EC of the fruit extract were measured by a pH meter and an EC meter, respectively. The measurement of chlorophyll a, b and total chlorophyll was done using a spectrophotometer in mature leaves developed according to the method suggested by Arnon (1967).Result and DiscussionThe results of this experiment showed that V4 and AZ4 cultivars had the highest stem and leaf weight compared to AZ5 cultivar. Also, the results showed that the Resh solution and modified pond water had the highest root dry weight (58 and 56 g, respectively) compared to the fish pond water treatment (47 g). The findings of this study showed that the use of Resh nutrient solution and modified pool water compared to the treatment of fish pool water increased the number of leaves of tomato plants by 23.88% and 18.69%, respectively. It seems that irrigation with modified pool water and Resh solution increases the growth and development of the plant due to the increase in the level of nutrients. The highest amount of total chlorophyll was observed in the Resh solution and modified pool water with concentrations of 2.3 and 2.2 mg/g, respectively. The results of Silva et al (2021) showed that in irrigation with fish waste, greater availability of magnesium in plant tissue increases the content of chlorophyll b in leaves and increases plant chloroplast pigments. The highest total yield was observed in cultivar V4 and in the treatments of Resh nutrient solution and modified pool water. The results showed that modified pool water had the highest EC of tomato extract (1.9 dS/m). Also, the results of the interaction effect of cultivar and nutrient solution showed that the highest fruit firmness was observed in Resh solution and fish pond water in V4 cultivar. Also, the lowest fruit firmness was observed fish pond water in AZ5 cultivar. It seems that, in the present study, the reduction of calcium absorption in fish pond water caused the reduction of firmness of tomato fruit (Kaab omeir et al., 2020).ConclusionIt seems that according to the above results, it is possible to use pool water with a high density of fish after modification and changes in the amounts of its nutrients in greenhouse tomato cultivation. Among the tested cultivars, the promising line V4 can be recommended for cultivation in the greenhouse for the use of modified fish pond water.

Research Paper - Olericulture

Evaluation the morphological and phytochemical response of broccoli seedling to the application of sucrose, Bordeaux mixture and potassium silicate under sudden cold stress

Alireza Nickkhoo; Kamran Ghasemi; Vahid Akbarpour

Volume 47, Issue 2 , August 2024, Pages 259-273

https://doi.org/10.22055/ppd.2024.44617.2120

Abstract

IntroductionBroccoli is a one of the vegetables that has a very high nutritional value and it is cultivated in many countries all around the world. Due to the intensification of climate ... Read More IntroductionBroccoli is a one of the vegetables that has a very high nutritional value and it is cultivated in many countries all around the world. Due to the intensification of climate change, sudden drops in temperature during the winter in northern countries pose a serious threat to some vegetable species, including broccoli. In this study, an experiment was conducted to investigate the effect of sucrose, potassium silicate, and Bordeaux mixture on increasing the tolerance of broccoli seedlings to sudden cold stress. Materials and MethodsThe experiment was conducted in a completely randomized design with eight treatments, three replications, and three samples per each replication. The treatments included: control, sucrose1%, potassium silicate 0.2%, Bordeaux mixture 0.2%, sucrose + potassium silicate, sucrose + Bordeaux mixture, potassium silicate + Bordeaux mixture, and sucrose + potassium silicate + Bordeaux mixture. Results and DiscussionThe effect of the treatments on the growth of broccoli seedlings one week after exposure to low temperature stress, including stem height, leaf number, shoot dry weight, root fresh weight, and root dry weight, was not statistically significant. The highest concentration of chlorophyll b (1.647 mg/g fresh weight) was obtained in the Bordeaux mixture treatment which along with the combined treatment of sucrose + potassium silicate + Bordeaux mixture were the only treatments that showed a significant superiority compared to the control. The highest transpiration rate among the tested treatments was observed in the sucrose + Bordeaux mixture treatment, which did not show a significant difference compared to the three-component treatment of sucrose + potassium silicate+ Bordeaux mixture, but showed a significant superiority compared to the other treatments. The foliar application of Bordeaux mixture caused a higher stomatal conductance compared to the control after a temperature stress of -2 °C, but the other treatments did not show a significant difference compared to the control. In terms of the non-photochemical quenching (Y(NPQ)), the highest Y(NPQ), was observed in the control and potassium silicate treatments, which was significantly higher than all other treatments. Meanwhile, the lowest level of this index was observed in the potassium silicate+ Bordeaux mixture treatment, which did not show a significant difference compared to the sucrose + potassium silicate, sucrose + potassium, and silicate+ Bordeaux mixture treatments. The highest level of antioxidant activity was observed only in the sucrose treatment and the sucrose + potassium silicate and Bordeaux mixture treatments, which were superior to all other treatments without any significant difference among them. In terms of total phenolic content, only the sucrose+ Bordeaux mixture treatment showed a significant superiority compared to the control, and the other treatments did not show a significant difference from the control. In the trait of soluble sugar content, the sole potassium silicate and the three-component treatments were better than the control, and the other treatments did not show a significant difference compared to the control. The highest ion leakage was observed in the sucrose + Bordeaux mixture treatment, which was higher than the control and all other treatments. The lowest ion leakage was also observed in the sucrose + potassium silicate and potassium silicate+ Bordeaux mixture treatments, although the difference between them and the control and potassium silicate-only treatments was not significant. The highest level of proline was observed in the sucrose+potassium silicate treatment, which was significantly superior to all other treatments. ConclusionSucrose+potassium silicate treatment improved the defense system of the plant against sudden cold stress by increasing the amount of carotenoid and proline, and as a result of these activities, the antioxidant of the whole plant and higher chlorophyll also increased. Also, this treatment showed low ion leakage and low non-photochemical quenching, which can show higher sudden cold tolerance. Another favorable treatment was potassium silicate + bordeaux mixture which produced a higher assimilation rate, although this photosynthetic production did not affect the biomass, but since the ion leakage was low and caused the lowest Y(NPQ), it can be said that the plant in this treatment receive lower stress. Overall, considering all the evaluated traits, the top-performing treatment in this experiment was the potassium silicate+ Bordeaux mixture treatment, followed by the sucrose + potassium silicate treatment. .

Research Paper - Ornamental Plants

The effect of salinity stress and the application of silver nanoparticles on flowering and some physico-biochemical characteristics of French parsley (Tagetes patula L.)

Khatoun Behzad; Abdollah Ehtesham Nia; Mohamadreza Raji; Hasan Moumivand; Majid Alikhani-Koupaei

Volume 47, Issue 2 , August 2024, Pages 275-291

https://doi.org/10.22055/ppd.2024.45252.2130

Abstract

IntroductionSalinity stress leads to ion toxicity and osmotic stress. Salinity stress through the osmotic mechanism, due to the reduction of the osmotic potential of the soil solution, ... Read More IntroductionSalinity stress leads to ion toxicity and osmotic stress. Salinity stress through the osmotic mechanism, due to the reduction of the osmotic potential of the soil solution, causes disturbances in transpiration and photosynthesis. The mechanism of action of ionic toxicity is also related to ion absorption and changes in physiological processes caused by toxicity, deficiency or change in the balance of mineral elements. In the last decade, the tendency to use metal nanoparticle compounds in agriculture and horticultural sciences has become popular. Researchers believe that silver nanoparticles are absorbed faster by plants due to their small size and high solubility, therefore, by using these materials, optimal conditions for plant growth are created and stress conditions are prevented in the plant. Materials and MethodsThe experiment was conducted in the greenhouse of Horticultural Science Department, Faculty of Agriculture located in Khorramabad city, Lorestan province in 2021. The experiment was conducted as a factorial in the form of a completely randomized design with four replications. The first factor was included salinity treatment at four levels (0, 25, 50 and 100 mM NaCl, respectively equivalent to 0.067, 2.450, 5.440 and 9.520 dS m-1) and the second factor was foliar application of nanosilver at 4 levels (0, 10, 50 and 100 ppm). Salinity treatments were started gradually with the application of low concentration of salt after establishing the plants in the pot. Nano silver foliar spraying was applied weekly for 5 times until the flowering stage. Foliar spraying with silver nanoparticles was done in 3 stages of four leaves, full growth and flowering. Results and DiscussionIn this study, application of nanosilver increased the quantitative and qualitative characteristics of parsley, including the fresh weight of the flower (by 2.23%). Nanosilver in concentrations of 10 and 50 mg/liter increases the relative content of leaf water (7.70%), the content of total phenol (5.96%), the content of total flavonoids (34.91%) and the amount of potassium in leaves (4.055 %) under salinity stress conditions. Additionally, the lowest amount of sodium leaf (0.162 %), ion leakage (25.44 %) and malondialdehyde (21.56 %) was observed in this treatment. Researchers believe that silver nanoparticles are absorbed faster by plants due to their small size and high solubility, therefore, by using these materials, optimal conditions for plant growth are created and any stressful conditions are prevented in the plant. Silver nanoparticles with suitable size and remarkable chemical stability remain in constant shape and size in solutions. ConclusionBased on the results observed in this study, the treatment of silver nanoparticles in concentrations of 10 and 50 ppm in the conditions of salinity stress, relative water content of leaves, potassium content of leaves, fresh and dry weight of flowers and time of budding and flowering were increased, while ion leakage, malondialdehyde, proline, total phenol and flavonoid content, and sodium content of leaves were decreased. Therefore, it can be stated that the application of silver nanoparticles in the form of foliar spraying at levels of 10 and 50 ppm can reduce the negative effects caused by salinity stress and improve the ornamental characteristics of parsley in 25 and 50 mM of salinity stress. .

Research Paper - Ornamental Plants

Effect of paclobutrazol on the growth characteristics of two turfgrasses (Festuca aranudinaceae Scherb.) and (Poa pratensis L.)

Mostafa Fazeli; Mansour Matloobi; Faribourz Zare Nahandi

Volume 47, Issue 2 , August 2024, Pages 293-308

https://doi.org/10.22055/ppd.2024.44964.2124

Abstract

Introduction Paclobutrazol is a growth regulator used to control growth and reduce the frequency of mowing in all types of turfgrass plants. This material also affects the height and ... Read More Introduction Paclobutrazol is a growth regulator used to control growth and reduce the frequency of mowing in all types of turfgrass plants. This material also affects the height and quality of different types of turfgrass. Therefore, the purpose of this research is to compare the growth behavior of two types of turfgrass subjected to paclobutrazol treatment and also to evaluate the possibility of using paclobutrazol to reduce the growth of turfgrass in areas with the same climate of Tabriz. Materials and Methods To determine the effect of paclobutrazol on height, and visual properties of turfgrass such as density, clippings fresh weight, leaf chlorophyll index, length and width of leaf blade, two grass plants Poa pratensis and Festuca arundinacea were treated with paclobutrazol in different concentrations. Grass plants were tested with concentrations of zero (control), 15, 30 and 45 mg/L-1 paclotrazol as foliar spray in 4 replicates of each treatment. This research was carried out in as a split plot experiment in the form of a randomized complete block design, so that the type of grass as the main factor in 2 levels and paclobutrazol as a secondary factor were considered in all the evaluated traits in both plant species. Results and Discussion The results of this research showed that paclobutrazol significantly affects the height of P. pratensis and F. aranudinaceae turfgrass plants. This effect was in the form of a significant reduction in the height of plants and controlling their growth. By increasing the concentration of paclobutrazol from zero to 45 mg/L, the height of the plants decreased. In both mentioned types of turfgrass, the most effective concentration was 45 mg/L. By increasing the concentration of paclobutrazol, the density of P. pratensis and F. aranudinaceae turfgrass plants has increased. The increase in density after paclobutrazol treatment was more evident in F. aranudinaceae. In general, the fescue turfgrass plant has stronger foliage, deep and strong roots, and lower density. The only exception was the increase in the chlorophyll index of fescue leaves (10 days after treatment) and P. pratensis (20 days after treatment) and in both of them under the concentration of 30 mg/L of paclobutrazol. Following paclobutrazol treatment and increasing its concentration, the length and width of the leaf blade as well as the clippings fresh weight of turfgrass plants were decreased. The reduction in the length and width of the leaf blade was similar in both plants, and the most effective concentration of paclobutrazol was 30 mg/L. However, the optimal effect of paclobutrazol was observed up to 30 days after the treatment. In the fourth measurement (40 days after the treatment), the effect of paclobutrazol decreased and there was no significant difference in the length and width of the leaves of the treated plants and the control plants. Conclusion In general, with the treatment of different concentrations of paclobutrazol, the number of aerial branches produced in F. aranudinaceae was more than that of P. pratensis. Since paclobutrazol is a growth inhibitor and by preventing the synthesis of gibberellin hormone, it prevents plants from elongation, this substance can be used to control the growth of turfgrass plants. This growth control reduces the number of mowing times, reduces fertilizer consumption, increases the efficiency of water use, and ultimately saves the cost of maintaining turfgrass plants. Since paclobutrazol accumulates in the roots and eventually causes the formation of new branches, it can be concluded that the effect of paclobutrazol on the density of F. aranudinaceae is greater than that of P. pratensis. .

Research Paper - Tropical and Subtropical Fruits

Foliar application of silica and potassium sulphate on some characteristics of pomegranate fruit cv. ‘Malase-Saveh’

Farzad Abdollahi; Abdolkarim Zarei; Javad Erfani-Moghadam; Mahmood Rostaminia

Volume 47, Issue 2 , August 2024, Pages 309-321

https://doi.org/10.22055/ppd.2024.46385.2150

Abstract

Introduction Pomegranate (Punica granatum L.) is a fruit-bearing species with a long history of cultivation in the tropical and subtropical regions of the world. Pomegranate production ... Read More Introduction Pomegranate (Punica granatum L.) is a fruit-bearing species with a long history of cultivation in the tropical and subtropical regions of the world. Pomegranate production in Iran, as the main pomegranate producer in the world, is faced with different challenges. Fruit cracking is one of the serious disorders in pomegranate that cause significant reduction in the quality of fruit and subsequent economic damages to the pomegranate producers annually. Fruit cracking can be controlled to some extent by appropriate orchard management. Proper orchard fertilization is among the influential cases that can lead to the improvement in the physiological state of trees in favor of reducing the fruit cracking. Materials and methods In this study, the effects of silicon and potassium sulfate spraying were investigated on the fruit cracking and some quantitative and qualitative characteristics of pomegranate fruit. An experiment was conducted to evaluate the combined effects of four levels of silica (0, 100, 300, and 500 ppm) and three levels of potassium sulfate (0, 0.75%, and 1.5%) spraying on the fruit of pomegranate cv. ‘Malase-Saveh’, one of the most important pomegranate varieties of Iran. The treatments were applied three times during the growing season. The experiment was arranged in a factorial experiment based on the completely randomized block design in three replicates. Data analysis was performed using SAS statistical software and the means were compared using Duncan Multiple Range Test (DMRT) at 5% level of significance. Results and Discussion The results indicated that most of the qualitative and quantitative traits were influenced by foliar spraying of these substances. Also, the results indicated that foliar application of silica, potassium sulfate, and their interaction significantly affected the fruit cracking. According to the results, the lowest fruit cracking (2.64%) was obtained by spraying 500 ppm silica and 0.75% potassium sulfate, while the highest fruit cracking (27.87%) was recorded from control plants. The highest fruit weight (204 g) was recorded in the treatment of 1.5% potassium sulfate and the lowest fruit weight (144 g) was recorded from untreated plants. Most of the treatments had a positive effect on fruit and aril weight and increased this character compared to the control. Spraying with 500 ppm silica and 1.5% potassium sulfate resulted in the highest (39.69 g) 100 arils weight, while control plants had the lowest (29.14) 100 arils weight. Silica and potassium sulfate treatment also improve the total soluble solid and titratable acidity in the fruit juice of pomegranate. Conclusion The data obtained from this study could provide valuable insights into the effects of proper fertilization in reducing one of the main pomegranate disorders. Overall, the results indicated that combined spraying of silica (500 ppm) with potassium sulfate (1.5%) is more effective than their individual use and results in the higher fruit yield and quality, as well as a lower cracking disorder. These findings suggest that there are synergistic effects between these compounds. According to the results of this investigation simultaneous application of silica and potassium is suggested as a practical strategy in orchard management practices that could be beneficial for improving qualitative and quantitative attributes of pomegranate fruit.

The Most Suitable Method and Time of Ber Tree (Ziziphus spina-christi L.) Budding in Ahvaz

Aziz Torahi; Majid Alihori

Volume 34, Issue 2 , February 2012, , Pages 81-86

Abstract

Ber (Ziziphus spina-christi L.) is one of the tropical and subtropical fruit trees that grow in different countries in Europe, America, Africa, Australia, and Asia including Iran. Ber ... Read More

Effects of harvest time and packing method on fruit quality and Cold-Storage duration of "Gorban Maragheh" apricot cultivar

M. Zarrinbal; A. Dabbagh Mohammadinasab; R. Rasouli Pirouzian

Volume 36, Issue 1 , June 2013, , Pages 1-11

Abstract

Apricot because of its high respiration rate and rapid ripening process has short storage life and so should be marketed immediately after harvest. Harvesting of apricot in suitable ... Read More

Induction of Transgenic Hairy Roots in Medicinal Plant Poppy (Papaver Somniferum L.) by Agrobacterium Rhizogenes-Mediated Transformation

A Jalilian; A A; F N; S.Z H

Volume 39, Issue 4 , March 2017, , Pages 1-14

https://doi.org/10.22055/ppd.2017.12057

Abstract

Background and Objectives Opium poppy plant (Papaver somniferum L.) is one of the oldest known medicinal plants. Since the potential of medicinal components production in medicinal ... Read More Background and Objectives Opium poppy plant (Papaver somniferum L.) is one of the oldest known medicinal plants. Since the potential of medicinal components production in medicinal plants is very limited in natural conditions, plant tissue culture, as a new technology, has an important role in industrial production of secondary metabolites in medicinal plants. Among different tissue culture systems, hairy root is very stable in hormone-free culture conditions and these roots stably produce secondary metabolites over a long period due to their inherent genetic and biochemical stability. Hence, the objective of this study was to evaluate the effect of some different parameters on optimization of hairy production in P. somniferum. Materials and methods In the present research, for the optimization of hairy root in papaver, a factorial experiment was conducted based on a completely randomized design with 4 replications. The factors included different Agrobacterium rhizogenes strains (ATCC15834, A4 and GMI9534), medium (MS and ½ MS medium), two temperatures (17 and 25 °C) at co-cultivation period, and two different explants (excised shoot and hypocotyl). Different traits were evaluated including percentage of induced hairy roots, number of lateral branches/1cm, number of hairy root per explants and days after inoculation (DAI). Results Hairy roots were induced at the wound site of explants after weeks of culture. Analysis of the results showed that strain ATCC15834, ½ MS medium, temperature 25 °C and excised shoot explant were the best treatment combination for hairy roots induction in the poppy plant. Transformed hairy roots were confirmed by polymerase chain reaction (PCR) using rolB gene specific primers. Discussion All of the A. rhizogenes strains led to hairy root induction, but there were no hairy roots formed from control explants. Differences in virulence, morphology and growth rate can be partially explained by the variety of plasmids harbored by the A. rhizogenesis strains. In the present study, excised shoot explants were highly and significantly susceptible to infection by each strain of A. rhizogenes and hypocotyl explants showed low rate of hairy root induction.

Effect of Different Ploidy Levels on Pollen Grain Fertility, Seed Germination and Seedling Transplanting Ability of Eggplant

H. Kaveh; H. Neamati

Volume 41, Issue 2 , September 2018, , Pages 1-12

https://doi.org/10.22055/ppd.2018.18116.1350

Abstract

Abstract Background and Objectives Eggplant (Solanum melongena L.) is an economically important crop with a wide range of fruit shapes and colors. Breeding programs in eggplant focus ... Read More Abstract Background and Objectives Eggplant (Solanum melongena L.) is an economically important crop with a wide range of fruit shapes and colors. Breeding programs in eggplant focus mainly on fruit quality. Production of commercial triploid cultivars and emission of seeds in fruits may increase acceptability by consumer and increase fruit quality. Induced tetraploidy and cross between di and tetraploid parental line is a conventional method used in different fruits and vegetables like watermelon. The current study aim to find how may induced tetraploidy affect pollen grain quality, its fertility, seed and transplant vigor in different eggplant cultivars. Materials and Methods Aiming to investigate autotetraploidy in four qultivars of Solanum melongena L., Keshtzar, Yalda, Chahboland and Passargad on fertility, number of days till fruit-set, germination rate and percentage and successful transplanting percentage, a survey was done in a completely randomized design. Tetraploid plants were derived from seed maceration/shoot tip treatment (0.5, 1 and 2 percent of colchicine). To ensure ploidy level, chromosome counting of root tips and flow-cytometry was done during the experiment. To quantify germination percentage and rate, 15 seeds of each cultivar in each ploidy level were placed in petri-dishes in three replications. The seeds of each ploidy form were sown in seedling trays and after seedling period, plugs were transplanted in field for evaluation of characteristics in different ploidy levels. Growth and development rate of plant in seedling stage observed since seeds were cultivated. As soon as hypocotyl appeared on the surface, they were counted. Then seedling emergence and rate were calculated. To test viability of pollen grains, they were stained using acetocarmen. In order to find best parental lines, 18 plants from each cultivar and in each ploidy level were cultivated in the greenhouse condition in three replications. Then all plants were crossed competley (direct and reciprocal). Di and tetraploid plants were tested to find out which one would be better as which parent. Results Number of days till fruit-set, characteristics of seed and seedling and growth rate in seedling stage were significantly (P≤5%) influenced by changes on levels of poloidy. Pollen grain staining with acetocarmine for evaluation of fertility percentage in pollen grains showed that with an increase in ploidy level, fertility may significantly increase (P≤5%). In an effort to triploid plant production, none of the crosses between di and tetraploid plant could bear fruit. Discussion With the overall results, despite slower growth, can be tetraploid plant, due to improved germination and seedling emergence, survival and reproductive capabilities, higher transplanting success in this category of plants, induced increase in the number of chromosomal bundles can be considered as a good way to create genetic variation and prepare parental lines with desirable traits for use in the breeding programs.

The Effect of Planting Date on Phonological Stages and Quantity Traits of Four Winter Rapeseed Cultivars in Yasouj

M.H F; A Y; M M; H B; H F

Volume 35, Issue 2 , September 2012, , Pages 99-113

Abstract

In order to study the effect of planting date on phonological stages and quantity traits of four cultivars of winter rapeseed, an experiment was carried out in 2008-2009 at the research ... Read More

Research Paper - Agronomy

Evaluation of Wheat and Rapeseed Yield Gap Using Boundary Line Analysis (BLA) in Khoramshahr

hamid matourian; aydin khodaei joghan; Mohammad Reza Moradi Telavat; SeyedAtaollah Siadat; Benjamin Torabi

Articles in Press, Accepted Manuscript, Available Online from 02 December 2023

https://doi.org/10.22055/ppd.2023.43754.2101

Abstract

IntroductionFood security is one of the most important challenges facing humankind. Therefore improving crop yields are essential to meet the increasing pressure of global food demands. ... Read More IntroductionFood security is one of the most important challenges facing humankind. Therefore improving crop yields are essential to meet the increasing pressure of global food demands. The loss of high-quality lands, increasing fertilizer use, and its effect on the environment indicate that we need to develop new strategies to increase grain yields with less impact on the environment. One strategy that could help address this concern is by narrowing the yield gaps using improved management. Therefore, the present study was conducted in khoramshahr region for recognition of best management practices, percentage of the affected fields, estimation of wheat and rapeseed yield potential and gaps using boundary line analysis.Materials and MethodsTo quantify the production and estimation of wheat and rapeseed yield gap in Khoramshahr, Farm management information of 60 wheat fields and 57 rapeseed fields in the years 2018-2019 were collected. This information was collected through continuous farm monitoring during the growing season as along with face to face interviews with the farmers. Farms were selected by consulting with agricultural service centers expert in Khoramshahr districts. Based on the available information at the service centers, only farms, which is different in terms of acreage, cultural practices and harvesting operations were selected. In this study, by plotting the distribution of the yield obtained in each field as the dependent variable against the independent variables (crop management activities), using SAS software and an appropriate function was fitted on the upper edge of the data distribution.Results and Discussion.Using this boundary line analysis method, the average yield, attainable yield and yield gap of wheat were obtained as 3740, 5455 and 1715 kg per hectare respectively. The yield gap percentage in wheat was 31.5% and rapeseed was 48%, which indicates the high effectiveness of wheat and rapeseed in relation to the use of appropriate management methods. The analysis of the investigated data in wheat fields showed that in order to achieve the achievable yield, 258 kg per hectare of seeds, the use of Mehrgan variety, the planting date until October 24, the amount of 280 kg per hectare of nitrogen fertilizer, the consumption of at least 100 Phosphorus fertilizer per hectare was at least 6 kg with irrigation and consumption of at least 70 kg of potassium fertilizer. Also, according to the frontier line analysis, the average yield of rapeseed farmers is 1663 kg, they can achieve a yield of 3197 kg per hectare by improving crop management, and for this purpose, the following measures should be taken into account: 1) consuming a maximum of seven kilograms of seeds per hectare 2) Planting date up to 17 November 3) Use of at least 300 kg of nitrogen fertilizer 4) At least 42 kg of phosphorus fertilizer 5) Use of Hyola 50 variety.ConclusionIn this study by examining several important management factors in growing wheat and rapeseed, optimal requirements of each factor to achieve the highest yield was determined by boundary analysis. In addition, the percentage of farms that had poor management as well as wheat and rapeseed yield potential and gaps in Khoramshahr. Yield responses to management practices were evaluated and studied by means of borderline analysis. Best management practices could be devised using study findings to realize the highest yield potential.

View Article

Research Paper - Modeling

Simulating response of lentil cultivars to sowing date and initial soil moisture in Lorestan province

Mojtaba Koohro; Sajjad Rahimi-Moghaddam; khosro Azizi; Saeid Heidari; Seyed Reza Amiri

Articles in Press, Accepted Manuscript, Available Online from 17 April 2024

https://doi.org/10.22055/ppd.2024.45041.2127

Abstract

Abstract Introduction Lentil is recognized as one of important legumes due to its favourable characteristics. The lintile production, like to other crops has been influenced by three ... Read More Abstract Introduction Lentil is recognized as one of important legumes due to its favourable characteristics. The lintile production, like to other crops has been influenced by three factors: management, genetics, and environment. Improving crop production can be achieved by optimizing these factors. Thus, paying attention to the above-mentioned factors can reduce the severe climatic effects on crop production. Among the above-mentioned factors, management strategies e.g., optimal sowing date and using the optimal cultivar are considered to improve crop production. Initial soil moisture, which can affect crop germination, establishment and ultimately growth and yield, is another important strategy. Accordingly, the current research was conducted in order to simulate the effects of cultivar, sowing date, and initial soil moisture on lentil grian yield in different locations of Lorestan province. Materials and Methods The study locations were Aligudarz, Nurabad, KhorramAbad, and Kuhdasht. Simple Simulation Models-iCrop2 (SSM-iCrop2) was used to simulate the lentil growth and development. The data required to run model included climatic, soil, management, and crop data. Daily long-term climatic data including maximum and minimum temperature, rainfall, and radiation were collected from Iran Meteorological Organization The crop data e.g., the specific genetic coefficients of each cultivar were obtained form Amiri and Deihimfard (2018). The study treatments consisted of four sowing dates (21 January, 12 February, 4 March, and 30 April), two cultivars (early-maturity and late-maturity) and four initial soil moisture (32, 36, 42, and 58 mm). The model was run for 41 years (1980-2020). Initial soil water contents and sowing dates were obtained from a preliminary simulation experiment. Results and Discussion Averaged across all treatments, the highest grain yield was obtained at KhorramAbad (388 kg ha-1) due to higher rainfall during the growing season. In addition, the grain yield difference among the sowing dates ranged from kg ha-1 on 30 April to 364 kg ha-1 on 21 January. The reason for the higher grain yield on 21 January sowing date was the higher cumulative rainfall season (149.3 mm vs. 99.2 mm) and the lower mean temperature (22.9 °C vs. 23.9 °C) during the growing season compared to other sowing dates. Across locations, sowing dates, and cultivars, the highest grain yield (263 kg ha-1) was simulated under initial soil moisture of 58 mm. Also, on average across sowing dates, initial soil moisture contents, and locations, the early-maturity cultivar simulated more grain yield than late-maturity cultivar (405 kg ha-1 vs. 63 kg ha-1) due to the avoidance of drought stress at the end of the growing season. Considering different interactions, on average across locations, the highest grain yield was simulated by 704 kg ha-1 in the combination of early-maturity cultivar, early sowing date (21 January), and initial soil moisture of 58 mm. Conclusion In general, the results indicated that the lentil grain yield varied among the various study treatments (sowing date, cultivar, and initial soil moisture) as well as different locations of Lorestan province. Lentil growers can increase the lentil production in Lorestan province and study locations by using the interaction of early planting date (21 January)  early-maturity cultivar (Kimia)  higher initial soil moisture (58 mm). It should be noted that the current research was conducted under water-limited condition and it is suggested that researchers focus on other limitimg and reducing factors in the future studies.

View Article

Research Paper - Agronomy

Study of photosynthetic pigments, seed yield, and oil compositions of camelina (Camelina sativa L.) under the influence of urea foliar application and irrigation regimes in Tehran

Kimia Momeni-Shijani; Seyed Ali Mohammad Modarres-Sanavy; Ali Heidarzadeh; amir mohammad abedi

Articles in Press, Accepted Manuscript, Available Online from 30 June 2024

https://doi.org/10.22055/ppd.2024.46765.2161

Abstract

Introduction: Oilseeds are rich in fatty acids, hence they are of paramount importance. Fats and oils are recognized as primary sources of energy in human nutrition. Additionally, fat-soluble ... Read More Introduction: Oilseeds are rich in fatty acids, hence they are of paramount importance. Fats and oils are recognized as primary sources of energy in human nutrition. Additionally, fat-soluble vitamins, which play a crucial role in maintaining human health, are supplied through the consumption of oilseeds in the body. Therefore, studying and researching oilseeds and their importance in today's nutrition is crucial. Camelina is an oilseed product belonging to the Brassicaceae family, which can adapt well to various environments and produce suitable oil for biological purposes. Due to its appropriate composition of unsaturated fatty acids such as oleic acid (omega-9), linoleic acid (omega-6), alpha-linolenic acid (omega-3), and low levels of saturated fatty acids, it is considered one of the highest quality edible oils. Materials and Methods: This research aimed to investigate the performance and composition of camelina oil under the influence of urea foliar application and irrigation regimes in split plots within a randomized complete block design with three replications during the agricultural year of 2022 at the research farm of the Faculty of Agriculture, Tarbiat Modares University. In this study, the examined factors included different irrigation regimes at the flowering stage of the plant at four levels defined as the main factor. These levels included optimal irrigation (no stress), mild water deficit stress, moderate water deficit stress, and severe water deficit stress. Irrigation continued until the plant's available moisture in the root zone reached 20, 40, 60, and 80 percent, respectively, and then irrigation continued to the field capacity. The secondary factor included the application of nitrogen fertilizer from urea source as foliar spray at six levels (0% (distilled water spray), 1%, 2%, 3%, 4%, and no foliar spray (control)). Results and Discussion: Under optimal irrigation conditions, seed yield and oil content showed the highest values, with the optimal irrigation treatment exhibiting the best yield. In mild water deficit stress conditions, seed yield decreased by 12.83% compared to the control (optimal irrigation), while foliar application of urea at concentrations of 1%, 2%, 3%, and 4% increased seed yield by 18.23%, 27.95%, 16.30%, and 11.74%, respectively, compared to the control (no foliar spray). In mild water deficit stress conditions, the use of urea fertilizer foliar spray at a concentration of 3% resulted in a greater increase in grain yield and oil content compared to other concentrations. Oil yield decreased by 4.42% and 21.23% in mild and moderate water deficit stress conditions, respectively, compared to the control (optimal irrigation). Additionally, foliar application of urea at concentrations of 1%, 2%, and 3% increased oil yield by 23.85%, 35.37%, and 23.81%, respectively, compared to the control (no foliar spray). Under severe water deficit stress conditions, the treatment with 2% urea fertilizer concentration led to the highest amount of seed oil, chlorophyll a, and chlorophyll b. Regarding the anthocyanin content, under severe water deficit stress conditions, foliar application of urea fertilizer at a concentration of 1% resulted in a greater increase in anthocyanin content compared to other treatments. Conclusion: In optimal irrigation conditions, grain yield and oil content showed the highest values. In mild water deficit stress conditions, the use of foliar spraying of urea fertilizer with a concentration of 3% led to a greater increase in grain yield and oil content than other concentrations. In severe water deficit stress conditions, urea fertilizer treatment with 2% concentration resulted in the highest amount of oil content and chlorophyll a and b.

View Article

Research Paper - Breeding of Fruit Trees Crops

Effect of rootstock and magnetized water on the morphological, physiological, and biochemical characteristics of apple sapling (Malus domestica) under salinity stress

Zahra esmaillou; Mohammadreza Asghari; Fariborz Zaare-Nahandi; Ebrahim Sepehr

Articles in Press, Accepted Manuscript, Available Online from 30 June 2024

https://doi.org/10.22055/ppd.2024.46457.2154

Abstract

Salinity poses a significant challenge to plant growth and can lead to adverse physiological and metabolic alterations. The selection of tolerant rootstocks offers a promising solution ... Read More Salinity poses a significant challenge to plant growth and can lead to adverse physiological and metabolic alterations. The selection of tolerant rootstocks offers a promising solution to mitigate this issue. Magnetized water technology has emerged as an innovative approach to alleviate the negative impact of salinity on water quality. In this greenhouse study, we aimed to explore the synergistic effects of rootstock selection and magnetized water treatment under salinity stress conditions on the growth of apple saplings. By examining these combined factors, we seek to understand their potential in enhancing plant resilience to salinity-induced stress. This research contributes to the ongoing efforts to develop sustainable strategies for managing salinity stress in agricultural settings, with implications for improving crop productivity and resilience in saline environments. Materials and Methods The factorial experiment was conducted using a randomized complete block design with four replications from 2019 to 2020 at the University of Urmia, Iran. The factors examined included two rootstocks (M7 and MM106), three levels of magnetized water (0, 0.1, and 0.2 Tesla), and three levels of salinity stress (0, 40, and 80 mM). To evaluate the investigated factors, leaf thickness, leaf temperature, leaf area, internode length, rootstock diameter, branch growth, greenness index (SPAD), relative water content (RWC), total phenol, antioxidant capacity and phenylalanine ammonia-lyase (PAL) enzyme were measured. Statistical analysis was done with SAS software (version 9.4). GLM procedure was used for the analysis of variance. Means were compared with the least significant difference (LSD) test. Results The three-way interactions of rootstock × magnetized water × salinity stress significantly influenced total phenol and PAL enzyme activity. Additionally, the main effects of rootstock, magnetized water and salinity stress on leaf thickness, root diameter, RWC and, SPAD were significant. Increasing salinity levels reduced rootstock diameter, shoot growth, leaf water content, SPAD, and leaf area. However, salinity treatment increased leaf thickness, leaf temperature, phenolic compound concentration, antioxidant capacity, and PAL activity compared to control. The highest internode (17.58 cm) and rootstock diameter (2.18 mm) were obtained with 0.1 Tesla magnetized water treatment. Conversely, increasing salinity stress reduced internode length in both M7 and MM106 rootstocks, and the maximum internode length was produced in M7 under non-saline conditions (19.35 cm). Also, the highest rootstock diameter (19.83 mm) was observed in MM106 under non-saline conditions. Moreover, leaf RWC was higher in M7 (82.70%) compared to MM106. The highest PAL enzyme activity (62.77 nmol g-1F.W.-1) was recorded under 80 mM salinity, 1.0 Tesla magnetic water, and M7 rootstock. Conclusion The utilization of magnetized water resulted in enhancements across various parameters including rootstock diameter, shoot growth, leaf water content, surface area, phenolic compounds, and PAL enzyme activity, surpassing the control group. Combining magnetic water treatment with M7 rootstock demonstrated significant mitigation of salinity-induced effects on apple saplings. Thus, the joint application of M7 rootstock and magnetic water is advocated for both saline and non-saline environments. This research underscores the importance of employing sustainable approaches to combat salinity stress in apple orchards, offering insights into effective management strategies for enhancing crop resilience in challenging agricultural conditions.

View Article

Research Paper

Evaluation and comparison of the percentage and yield of seed oil in different populations of the Dragon's head (Lallemantia iberica Fisch. et Mey) in the northwest of the country

Jalil Shafagh-Kolvanagh; Adel Dabbagh Mohammadi-Nasab; Yaegoob Raee; Payvand Samimifar; Mina Amani

Articles in Press, Accepted Manuscript, Available Online from 30 June 2024

https://doi.org/10.22055/ppd.2024.46229.2148

Abstract

Introduction: Dragon's head, due to low water requirement or in other words, low water expectation, a short growth period of about 80-95 days can be useful for the climatic conditions ... Read More Introduction: Dragon's head, due to low water requirement or in other words, low water expectation, a short growth period of about 80-95 days can be useful for the climatic conditions of the Iran, especially Azerbaijan. According to the planting of several ecotypes with diverse growth and yield characteristics and the measurement of various quantitative and qualitative traits, as well as the use of statistical methods in data analysis, it is possible to identify and introduce the compatible and suitable ecotypes for the region and, if necessary, in the breeding programs. Therefore, the purpose of this research is to investigate the percentage and yield of the oil of 49 ecotypes of Dragon's head. Materials and methods: In order to evaluate the characteristics related to the percentage and yield of the oil of 49 ecotypes of the Dragon's head collected from different regions of the Iran, a research in the form of a randomized complete block design with 3 replications was carried out during the years 2015 and 2016 in the research farm of the Faculty of Agriculture of the University of Tabriz. The most important traits measured included the length of the fertile branch, seed yield per unit area and the number of seeds in the main and branch branches, as well as some qualitative traits such as oil percentage and oil yield. Data normality test was done using SPSS software and statistical analysis of data based on randomized complete block design and composite analysis using MSTAT-C and SPSS software. The comparison of the average data of the evaluated traits was done using Tukey's test at the probability level of 1%. Also, to group the ecotypes, cluster analysis was done by Ward's method, and the cut point of the resulting dendrogram was determined using the detection function analysis, and Excel software was used to draw the figures. Research findings: The obtained results showed that the ecotypes significant differences in most of the studied traits. In the regression analysis of oil yield, the highest regression coefficient (1.098) was observed in seed yield per unit area. Based on the average comparison results, ecotypes No. 37 (Alwar village of Bostanabad) with an average of 116.3 gr/m2, No. 23 (Tabriz 4) with an average of 107.7 gr/m2 and No. 24 (local mass of Kalvanagh 14) with an average of 101.7 gr/m2 had the highest grain yield per unit area. According to the results of the variance analysis table of ecotype effect on seed oil percentage, the yield of oil per surface unit was significant. So that ecotype No. 8 (indigenous population of Kalvanaq 7 city) with an average of 44.3 % had the highest percentage of oil in the seed among the 49 tested ecotypes, and ecotype No. 27 (native population of Param 1 Harris village) was in the next rank. While ecotype No. 37 (native population of Alwar village, Bostanabad) had the highest oil yield per unit area with an average of 44.4 gr. Conclusion: Based on the results of this research, ecotypes No. 37 (Alwar village of Bostanabad), 23 (Tabriz 4) and 24 (Kolvanagh 14) were recognized as the most suitable and compatible ecotypes for Tabriz city in terms of grain and oil yield traits.

View Article

Research Paper

Effect of Selenium, Silicon and Zeolite on Yield and Yield Components and Percentage of essential oil of Fennel (Foeniculum vulgare Miller.) in Khosrowshahr Region

Jalil Shafagh-Kolvanagh; Mohammad Bagher Tajkhalili; Ahmad Bybordi; Mina Amani

Articles in Press, Accepted Manuscript, Available Online from 30 June 2024

https://doi.org/10.22055/ppd.2024.44762.2122

Abstract

Abstract Introduction: Studies have shown that the use of some compounds whose importance is often neglected by researchers and farmers can have a significant effect on the growth and ... Read More Abstract Introduction: Studies have shown that the use of some compounds whose importance is often neglected by researchers and farmers can have a significant effect on the growth and yield of plants and increase the amount of essential oil production in medicinal plants. Therefore, this research was conducted with the aim of investigating the effects of Selenium and Silicon foliar application and zeolite soil application on the yield and components of seed yield and the percentage and yield essential oil of Fennel (Foeniculum vulgare Miller.). Materials and methods: This experiment was carried out in the form of a split split plot (twice chopped) based on a randomized complete block design with three replications at the Khosrowshahr Agricultural and Natural Resources Research Center in the 2019 crop year. The first factor includes foliar spraying of calcium (zero and 4 gr/L) and the second factor includes foliar spraying of selenium (zero and 4 gr/L) in the main and secondary plots, respectively, and the third factor includes the application of zeolite (zero, 5 and 10 tons/ha) were placed in sub-sub-plots. In the full ripening stage, 50 plants were harvested from one square meter of each plot and the dry matter of the whole plant, number of seeds per umbels, number of seeds per plant, 1000-seed weight, seed yield, percentage and essential oil yield were measured. Results and Discussion: The results of variance analysis of the data showed that the effect of selenium on the number of umbels per plant, the number of seeds per umbel and plant was significant. The number of seeds in umbels and bush were affected by silicon and zeolite, respectively. The main effects of these treatments on grain yield, total dry matter and essential oil yield were significant. The seed yield increased with the application of these treatments, which resulted in an increase in the yield of fennel essential oil per unit area. Based on the results of the average data comparison, the use of all three compounds of zeolite, selenium and silicon caused a significant increase in the yield of fennel essential oil and increased this attribute by 24, 23.1, and 22.5 percent, respectively. gave silicon and selenium increased the yield of essential oil by increasing the seed yield. In addition, zeolite had a positive effect on seed yield through the number of seeds, while silicon and selenium increased both characteristics of yield components, including 1000-seed weight and number of seeds. Conclusion: In this study, the increase of essential oil yield under the influence of zeolite application was related to the increase of essential oil percentage, while silicon and selenium increased the yield of fennel essential oil. The results of this study showed that the use of all three compounds of zeolite, selenium and silicon caused an acceptable increase in the essential oil product and in most cases, the effects of all three compounds had an effect on the studied traits separately, so it can be said that these three compounds were effective on the studied plant with different mechanisms.

View Article

Research Paper - Agronomy

Study of yield and yield components of camelina (Camelina sativa L.) under water deficit stress conditions with the application of zeolite and wood vinegar

Amirmohammad Abedi; Seyed Ali Mohammad Modarres-Sanavy; Ali Heidarzadeh

Articles in Press, Accepted Manuscript, Available Online from 26 August 2024

https://doi.org/10.22055/ppd.2024.46482.2155

Abstract

Introduction: The agricultural sector bears the responsibility of ensuring food security through domestic production and natural resource conservation. Oilseeds are among the essential ... Read More Introduction: The agricultural sector bears the responsibility of ensuring food security through domestic production and natural resource conservation. Oilseeds are among the essential food items that require a significant amount of water. Introducing Camelina plant as a suitable alternative with characteristics compatible with unfavorable environmental conditions and low requirements for water and nutrients can serve as an effective solution for diversifying cultivation and meeting the country's oil needs. Materials and Methods: This study was conducted to investigate the yield and yield components of Camelina under zeolite and wood vinegar application in water deficit stress conditions. The experiment was carried out in 2023 in a split-plot factorial design with three replications at the Agricultural Faculty Farm of Tarbiat Modares University. The factors examined included irrigation regimes at four levels: optimal irrigation, mild water stress, moderate water stress, and severe water stress, corresponding to 20, 40, 60, and 80 percent of available water capacity after depletion (absorption in the root zone or evaporation), followed by irrigation to field capacity. These regimes were studied in main plots, combined with two levels of zeolite application (no application and 8 tons per hectares) and four levels of wood vinegar application (0, 5000, 10000, 15000 ppm) in subplots in a factorial combination. Results and Discussion: According to the results, it can be concluded that the use of zeolite and foliar spraying of wood vinegar in optimal irrigation conditions can have significant improvements in all the measured traits. Also, in moderate and severe irrigation conditions, these effects become more significant. But it should be noted that in severe irrigation, no significant effects of zeolite were observed, while the use of wood vinegar with a concentration of 10,000 ppm can have significant improvements in some plant characteristics, such as grain yield and harvest index. Overall, these results show that the use of zeolite and wood vinegar can be used as effective methods in improving the performance of plants, especially in low water conditions. According to the results, it can be concluded that the use of zeolite and foliar spraying of wood vinegar in optimal irrigation conditions can have significant improvements in all the measured traits. Also, in moderate and severe irrigation conditions, these effects become more significant. But it should be noted that in severe irrigation, no significant effects of zeolite were observed, while the use of wood vinegar with a concentration of 10,000 ppm can have significant improvements in some plant characteristics, such as grain yield and harvest index. Overall, these results show that the use of zeolite and wood vinegar can be used as effective methods in improving the performance of plants, especially in low water conditions. According to the results, it can be concluded that the use of zeolite and foliar spraying of wood vinegar in optimal irrigation conditions can have significant improvements in all the measured traits. Also, in moderate and severe irrigation conditions, these effects become more significant. But it should be noted that in severe irrigation, no significant effects of zeolite were observed, while the use of wood vinegar with a concentration of 10,000 ppm can have significant improvements in some plant characteristics, such as grain yield and harvest index. Overall, these results show that the use of zeolite and wood vinegar can be used as effective methods in improving the performance of plants, especially in low water conditions. Conclusion: For increasing seed yield and biological yield, moderate water stress along with zeolite application is recommended as the most cost-effective treatment. In severe water stress conditions, the application of wood vinegar foliar application at 10000 ppm concentration is recommended to enhance seed yield and biological yield.

View Article

Number of Volumes	46
Number of Issues	55
Number of Articles	579
Number of Contributors	1,523
Article View	696,657
PDF Download	336,113
View Per Article	1203.21
PDF Download Per Article	580.51
Number of Submissions	1,196
Reject Rate	59
Acceptance Rate	30
Average Time to Accept (Days)	150
Number of Indexing Databases	4

Volume 47 (2024)

Volume 46 (2023)

Volume 45 (2022)

Volume 44 (2021)

Volume 43 (2020)

Volume 42 (2019)

Volume 41 (2018)

Volume 40 (2017)

Volume 39 (2016)

Volume 38 (2015)

Volume 37 (2014)

Volume 36 (2013)

Volume 35 (2012)

Volume 34 (2011)

Volume 33 (2010)

Volume 32 (2009)

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Indexing and Abstracting

Keywords Cloud