Plant Productions - Articles List

Impact of Jasmonic Acid on Radiation Use Efficiency and Dry Biomasses of Sugar Beet (Beta vulgaris L.) under Water Deficit Conditions

Hamideh Ghagari; Mahmoud Reza Tadayon

Volume 41, Issue 4 , March 2019, , Pages 111-124

https://doi.org/10.22055/ppd.2018.22847.1499

Abstract

Abstract Background and Objectives Drought stress is a major limitating factor on crop production and plant distribution worldwide. Reduction of RUE, water stress also affects ... Read More Abstract Background and Objectives Drought stress is a major limitating factor on crop production and plant distribution worldwide. Reduction of RUE, water stress also affects foliage expansion and eventually radiation capture. Water stress almost decreases fresh root weight. Sugar beet (Beta vulgaris L.) is an important commercial crop that supplies approximately 30% of the world’s sugar. Research has showed reduction in the leaf area and a smaller decrease in the taproot growth of sugar beet when subjected to drought stress. Phytohormones are part of signaling pathways or their presence may stimulate signaling reactions molecules that are responsible for plants to response stresses. Exogenously applied jasmonates elicit several different physiological responses to stress and therefore increase plant resistance. For instance, MeJA was reported to improve resistance against drought in rice. Materials and Methods This research was carried out in 2015 in the research field station of Shahrekord University, Shahrekord, Iran (50051/N, 32019/E and 2050 m a.s.l). A field experiment was conducted as split-plot arrangement in a randomized completely block design with three replications on sugar beet (Monogerm Castille seed). The main plot included three irrigation treatments 100% (control), 75% and 50% of water requirement and the sub plot included 3 levels of jasmonic acid applied sprayed with water (control), 5 and 10 µM jasmonic acid. Foliar spray was done at 6-8, 12-16 and 20-24 leaf stages. Plants were grown under full irrigation until the 16-20 leaf stage, when water stress was applied. Results The result showed that light absorption percent and extinction coefficient were significantly affected by irrigation level, jasmonic acid applications and their interactions. The interaction between drought level and jasmonic acid application showed the highest increase in light absorption percent (73.07) and extinction coefficient (0.58) were recorded in 100% of water requirement and 10 µM jasmonic acid application. Drought levels led to decrease of radiation use efficiency. Jasmonic acid increased radiation use efficiency. In terms of the trend of the leaf area index, dry matter accumulation of shoot and root had the highest in 100% of water requirement and application 10 µM jasmonic acid. The improvement of leaf characters of sugar beet by jasmonic acid of treatment may be due to the fact that jasmonate antagonistically regulates the expression of stress inducible proteins, associated with drought stress in rice. Discussion With the increase in leaf area index, dry matter accumulation increased. Jasmonic acid improved sugar beet growth under drought stress by inducing plants to increase organic osmoprotectants. JA spray could be adopted as a potential growth regulator or antioxidant to improve growth under water deficit stress on sugar beet.

Effects of Drought Stress on Enzymatic and Non- Enzymatic Antioxidants in Flag Leaf and Spikes of Tolerant and Sensitive Wheat Genotypes

P. Sharifi; N. Mohammadkhani

Volume 41, Issue 3 , December 2018, , Pages 37-50

https://doi.org/10.22055/ppd.2018.20256.1420

Abstract

Abstract Background and Objectives Drought stress is one of the main limiting factors in plant production in semiarid regions; this is due to its oxidative stress. Materials and Methods ... Read More

Studying the Effect of Mesosulfuron Methyl + iodosulfuron Methyl on Chlorophyll Fluorescence Parameters of Phalaris Minor

Z. Avarseji; E. Mohammadvand

Volume 41, Issue 3 , December 2018, , Pages 63-72

https://doi.org/10.22055/ppd.2018.21851.1468

Abstract

Abstract Background and Objectives Measuring of chlorophyll fluorescence is a nondestructive and sensitive way to give important information about photosynthesis apparatus. Fluorescence ... Read More Abstract Background and Objectives Measuring of chlorophyll fluorescence is a nondestructive and sensitive way to give important information about photosynthesis apparatus. Fluorescence spectrum is different from the absorbed one by chlorophyll and it has higher wave length so the fluorescence yield could be measured by exposing a leaf with a defined wave length of light and then quantifying the higher reflected wave. The purpose of this experiment was to make comparison among chlorophyll fluorescence important parameters for early prediction of destructive effects of mesosulfuron methyl + iodosulfuron methyl before revealing the symptoms of Phalaris minor. Materials and Methods A greenhouse experiment with five replications and six treatment based on completely randomized design was conducted to evaluate the chlorophyll fluorescence parameters of Phalaris minor sprayed by mesosulfuron methyl + iodosulfuron methyl up to seven days after spraying.Herbicide doses were 18, 12, 8, 5.3 and 3.5 g a. i./ha with an untreated treatment as control. Herbicide was applied at three leaf stage of Phalaris minor with MATABI elegance plus sprayer equipped by tee-jet 8001 nozzle at 300 kpa pressure. Fluorescence measurements were conducted by Handy PEA fluorimeter that flashes a wave length of 650 nm at 300 μ mol/m2.s intensity during 10 seconds on dark adapted leaf one day after spraying at 10 a.m. every day until seven days after spraying. Results The results indicated that Fv/Fm and Area parameters showed slow response to mesosulfuron methyl + iodosulfuron methyl application whereas Fvj and PI showed a fast reaction. Approximately from the first day after spraying the two mentioned parameters drastic reduction happened which was more intense but with bigger standard errors in PI compared to Fvj. with an increase in mesosulfuron methyl + iodosulfuron methyl dose both PI and Fvj parameters were decreased. Discussion It could be concluded that these two parameters show special sensitivity to the mesosulfuron methyl + iodosulfuron methyl application and before the symptoms of the herbicide appears, they give a picture of physiological destructive effects of the herbicide.Whereas the Fvj parameters during all seven days after spraying shows a steady reduction with low standard errors, PI index shows reduction with higher standard errors which make the Fvj parameters more reliable. The two Fv/Fm and Area which were repeatedly reported as a sensitive factor to the stresses at this experiment were not appropriate indices. The common dose response methods of herbicide can be replaced by chlorophyll fluorescence measurements and it can offer fast, accurate, and an important information about herbicide efficiency very fast and accurate.

Estimates of Variance Components and Heritability of Grain Yield and Yield Components in Confectionary Sunflower Landraces in Different Levels of Irrigation

E. Gholinezhad; R. Darvishzadeh

Volume 41, Issue 2 , September 2018, , Pages 29-40

https://doi.org/10.22055/ppd.2017.19226.1383

Abstract

Abstract Background and Objectives Drought stress is a limiting factor for sunflower. Various reports have mentioned the effect of water stress and limited irrigation on sunflower for ... Read More Abstract Background and Objectives Drought stress is a limiting factor for sunflower. Various reports have mentioned the effect of water stress and limited irrigation on sunflower for many respects, including phonological traits, morphology, agronomic and physiological. Sunflower is a crop that can withstand a variety of environmental conditions, particularly drought and due to the developed root system. It has high efficiency in absorbing water from the soil. Sunflower is one of the most important oil crops and due to its high content of unsaturated fatty acids and a lack of cholesterol, the oil benefits from a desirable quality. The aim of this study is to investigate the genetic diversity and the heritability of agro-morphological traits in confectionary sunflower under different levels of drought stress. Materials and Methods 56 local populations were studied in three separate experiments in rectangular lattice design (7×8) with two replications at Agricultural Research Center of West-Azerbaijan province, Urmia, Iran in 2012. Water treatments were well-watered, moderate and severe water stress conditions so that irrigation was applied with 50%, 70% and 90% depletion of available water, respectively. Various agronomic and morphological traits were calculated based on measuring traits in sunflower. Productivity effort as a physiological trait was measured by dividing the total dry weight of reproductive organs (head) to the total dry weight of plant. Results The results showed that in all three different water treatment conditions, heritability of head diameter, stem diameter, plant height, grain and biological yield was more than other traits. In well-watered conditions, moderate heritability varied between 0.52% for number of seeds per head to 80.61% for plant height. In moderate drought stress condition, the maximum and minimum heritability belonged to head diameter (76.21%) and chlorophyll index (26.45%), respectively. In severe drought stress condition, the most and the least heritability was observed for stem diameter (83.64%) and number of seeds per head (0 %), respectively. Among yield components, the heritability of 1000-grain weight at three water treatment conditions was higher compared to number of seeds per head, so for increasing grain yield, selection via 1000-grain will be more efficient. Discussion For the traits of grain yield, head diameter, stem diameter, biomass yield, chlorophyll index, dry weight of leaf, head and head with grain, the heritability in severe drought stress was higher than optimum conditions and this showed that the phenotypic variance is a large proportion of the genetic variance of more favorable traits. Due to the fixed component in the numerator and the denominator of genetic variance, environmental variance decreased in drought stress conditions in comparison with optimum irrigation conditions.

The Effect of Salinity and Fruit Ripening Stage on Some Quantitative and Quantitative Characteristics of Tomato in Hydroponics

R. Azarmi; N. Chaparzadeh

Volume 41, Issue 2 , September 2018, , Pages 91-102

https://doi.org/10.22055/ppd.2018.20715.1432

Abstract

Abstract Background and Objectives Tomato is one of the most important vegetable in Iran, not only because of its economics importance, but also for the nutritional value of its fruit, ... Read More Abstract Background and Objectives Tomato is one of the most important vegetable in Iran, not only because of its economics importance, but also for the nutritional value of its fruit, mainly due to the fact that they are an excellent source of natural colors and antioxidant compounds. Water quality and fruit maturity stage has a significant effect on tomato fruit quality. In the present research, we studied the response of tomato grown at different salinity levels, as well as the changes that take place during different maturity stages, in order to improve the management and harvesting of tomato and obtain fruit of a higher nutritional value. Materials and Methods In this study, to evaluate the effect ofsalinity and fruit ripening stage on physical, biochemical properties and shelf life of tomato fruits in hydroponics system, an experiment was carried out as factorial based on randomized complete block design with three replications at Moghan College of Agriculture and Natural Resources, during 2015. Fruits from plants grown under three saline treatments (2, 4 and 8 dS m-1) were harvested at three ripening states (mature green, purple and red colors). The nutrient solution was prepared based on full strength of Hoagland's solution containing: 5.6 mM Ca (NO3)2, 4 mM KNO3, 1 mM KH2PO4. Characteristics such as fruit fresh and dry weight, total soluble solid, firmness, flavor index, titratable acidity, soluble protein, ascorbate peroxidase activity and shelf life were measured. Results The results showed that total soluble solids, juice electrical conductivity and dry matter percentage of fruits significantly increased with increasing salinity in the nutrient solution and progressed the ripening stage, but fruit water content decreased by 9%. The highest weight (147.7 g) and volume of fruits (153 cm3) were obtained in plants grown under 2 dS m-1 salinity and fruits harvested at the purple stage. Titratable acidity increased with increasing of salinity in the nutrient solution, but its content decreased at the red color stage. Firm fruit with greater shelf life was observed under 2 dS m-1 salinity and at the mature green stage. Soluble protein content in fruit was increased by increasing salinity levels in the nutrient solution, especially at the ripening stage. The application of 4 dS m-1 salinity at mature green stage increased ascorbate peroxidase activity up to 62.5% compared to 8 dS m-1 salinity and red color fruits. Discussion These results suggest that the improvement in fruit quality induced by the salinity is achieved by some biochemical changes and the reduction of fruit water content. Increasing of salinity in the nutrient solution can be useful for improving fruit quality, especially, when fruit is harvested at the red stage. However, with increasing salinity in the nutrient solution up to 4 dS m-1 and fruit harvest in the red color stage fruits with better quality and more suitable weight can be produced.

Identification of resistant Avena ludoviciana Dur Accessions to ACCase Inhibitor Herbicides in Gonbad-E Kavus Wheat Fields and Mapping Their Distribution

S. Tatari; J. Gherekhloo; A. Siahmarguee; H. Kazemi

Volume 41, Issue 2 , September 2018, , Pages 103-116

https://doi.org/10.22055/ppd.2017.21015.1439

Abstract

Abstract Background and Objectives Wheat is the most important crop in Iran and every year about 6.5 million ha of arable lands in the country is cultivated by this strategic crop. ... Read More Abstract Background and Objectives Wheat is the most important crop in Iran and every year about 6.5 million ha of arable lands in the country is cultivated by this strategic crop. Weeds cause 23 to 30% reduction in yield of wheat annually. Winter wild oat is the most serious grass weed of wheat fields of Iran. Chemical method is the common way to weed control in wheat fields. ACCase inhibitors such as clodinafop-propargyl, diclofop-methyl and Fenoxaprop-P ethyl + Mefen pair di ethyl are widely used for control of grasses in this regard. Continuous application of herbicides with the same mode of action has resulted in developing herbicide resistant biotypes of weeds such as Avena ludoviciana. The objectives of the current study were: 1) to screen the collected accession of A. ludoviciana suspected to resistance to FOP herbicides, 2) to determine the resistance factor of resistant biotypes and 3) mapping distribution of resistant biotypes. Materials and Methods In order to survey Avena ludoviciana resistance to clodinafop-propargy, diclofop-methyl and Fenoxaprop-P ethyl+ Mefen pair di ethyl herbicides in wheat fields of Gonbad-e Kavus, several experiments were conducted in 2014 at Gorgan University of Agricultural Sciences and Natural Resources. (115 populations). The seed bioassay in Petri dish and pot experiment was conducted to determine resistance to acetyl coenzyme Acaboxylase inhibitors (ACCase), respectively. The seed bioassay experiment consisted of screening the suspected populations with discriminating concentration and concentration-response bioassay for resistant populations. Results In 48, 27 and 21 populations of A. ludoviciana were resistant to clodinafop-propargyl, diclofop-methyl and Fenoxaprop-P ethyl + Mefen pair di ethyl herbicides. Resistance accessions indicated varying degrees of resistance to tested herbicides. Based on EC50, the lowest and highest resistance to Clodinafop-propargyl herbicide was shown in Accessions of 74 and 6 with resistance factors of 1.99 and 31.42, respectively. Also for Diclofop- methyl herbicide, EC50 values from 2.88 for accession of 103 (with 1.34 resistanc factor) to 16.02 for accession of 91 (with 7.45 resistance factor) were different. In addition, EC50 estimatedfor Fenoxaprop-P ethyl + Mefen pair di ethyl herbicide was different from 0.124 to 0.86 for 20 and 6 accessions, respectively. Checking the distribution map of resistance accessions showed these accessions had uniform distribution in this city. Discussion Based on these observations, the existence of cross-resistance to herbicides was proved in some of the collected accessions. The results of this study can be used to correct programs designed to manage weeds herbicide resistance and prevent of the development of the plants in other areas.

Assessing the Morphological, Phonological and Physiological Diversity of Some Center and South Iranian Onion (Allium cepa L.) Genotypes as Regards Bolting Resistance

S. M. Zarrin; A. Masoumiasl

Volume 41, Issue 2 , September 2018, , Pages 117-131

https://doi.org/10.22055/ppd.2018.18873.1369

Abstract

Abstract Background and Objectives After the potato and tomato, onion production is in the third place in world, but planting it in the fall season is faced with the problem of bolting. ... Read More Abstract Background and Objectives After the potato and tomato, onion production is in the third place in world, but planting it in the fall season is faced with the problem of bolting. Although flower production is one of the main stages of seed production, flowering branches formation by consuming foods stored in the bulb reduces the quality and quantity of products. Critical size of plants for stimulating the production of flowering branches depends on genotype (Brewster, 1985). Temperature requirement for stimulating flower production varies between 5 and 12 degree Centigrade (Khokhar et al., 2007; Wiebe, 1990; Brewster, 1982). Thus, studying how this phenomenon, effective environmental conditions and its inducing factors for identifying bolting resistant genotypes is considered important. Materials and Methods The seeds of six Iranian landraces genotypes of onion including Lorestan, Qom, Tehran, Kerman, Hormozgan and Sistan (received from Iranian Gene Bank, Karaj), 10 indigenous genotypes collected from different regions of the center and south of Iran, as well as two foreign commercial cultivars were planted in pots in the greenhouse condition. After reaching the eight leaf stage, plants were transferred to the cold room. The average temperature of cold room was 8 °C and photoperiod was 11 hours brightness to simulate winter condition. To evaluate cold requirement for bolting, two different treatment times (45 and 70 days) were considered. After that treatment, pots were transferred to the greenhouse. Some morphological, phonological and physiological traits were measured. Results According to results of analysis of variance, differences of all traits between all studied genotypes were significant showing high variability in genotypes. Also, the effect of genotype and treatment for plant height, flowering percentage, total leaf soluble solids and total leaf soluble protein was significant. In this study, Kerman genotype was identified as the most resistance genotype to bolting in both treatments. Then Ghale Reiysi, Golden and Badrood genotypes, with the small flowering percentage showed the highest resistance to bolting. Badrood genotype had the highest sensitivity to bolting. Discussion Kazemi Shahandashti et al. (2011) suggested that cold treatment inhibits cell division so the temperature decrease leads to stoping the growth and changing the synthesis of proteins. However, in some plants during the cold treatment, adaptability to cold is normal and higher height in some genotypes can be attributed to cold adaptability of them. These results generally reflect the diversity between genotypes in terms of flower production and indicate that in line with other studies (Darabi, 2010), the flower production reduced weight, length, diameter and volume of bulb. In general, increase in total soluble solids can be considered as a physiological index for resistance to bolting.

Evaluation of Sodium Accumulation in Leaves of Wheat (Triticum Aestivum L.) Cultivars Differing in Salt Tolerance

V. Atlassi Pak

Volume 41, Issue 1 , June 2018, , Pages 43-56

https://doi.org/10.22055/ppd.2017.19760.1405

Abstract

Abstract Background and Objectives Two main mechanisms for salt tolerance in plants are low rate of salt transport to shoots and tolerance of high leaf salt concentrations by sequestration ... Read More Abstract Background and Objectives Two main mechanisms for salt tolerance in plants are low rate of salt transport to shoots and tolerance of high leaf salt concentrations by sequestration of Na+ within cells vacuoles. Recently research for genetic variation in Na+ accumulation within bread wheat has revealed large variation in leaf Na+ concentration. The control of Na+ accumulation in leaf is an important physiological process conferring salt tolerance to wheat. Many studies have shown that low sodium concentration in leaves correlate with salt tolerance. Sodium concentration in leaves may be influenced by sodium uptake by roots and transport from root to shoot. Materials and Methods In order to understand the salt tolerance mechanisms and the pattern of Na+ accumulation, 3 bread wheat cultivars differing in salt tolerance (Kavir, Mahdavi and Jajan), were evaluated through two factorial experiments based on completely randomized design in three replications. Experiment 1 used 3 cultivars (Kavir, Mahdavi and Jajan) with four salt treatments (0, 50, 100 and 150 mM NaCl) and experiment 2 used three cultivars (Kavir, Mahdavi and Jajan) with two salt treatments (0 and 150 mM NaCl). Results Leaf Na+ concentration of genotypes was increased in response to increasing salinity after 14 days but Na+ concentration was greater in sensitive genotype (Tajan) than tolerant genotypes (Kavir and Mahdavi). There were no significant differences between genotypes in RGR and shoot: root ratio. Results showed that the differences between genotypes in Na+ transport were responsible for differences in shoot Na+ concentrations. Na+ concentration in the root of all genotypes was the same but salt tolerant genotypes maintained higher K+: Na+ ratio in shoot. Shoot biomass was significantly reduced at 150 mM NaCl, whereas this reduction was almost the same for all genotypes. Kavir had the highest ability to tolerate high leaf tissue concentrations of Na+ and leaf Na+ concentrations were much lower in Mahdavi than two other cultivars. Discussion It seems that the major effect of salinity on shoot biomass was due to the osmotic effect of salt, not due to Na+-specific effects within the plant. Differences in Na+ transport rates from roots to shoots may cause different patterns of sodium accumulation through time. The comparison of genotypes suggests that at least there are two main mechanisms for salt tolerance in hexaploid wheat. One is a lower rate of Na+ accumulation in shoot and the other is tolerance of tissue to high concentrations of Na+.

Effect of Different Priming on Seed Germination Indices and Enzyme of Sorghum (Sorghum bicolor L.) SOR834 Genotype under Cadmium Chloride and Nitrate Toxicity

A. Rezai; H. Balouchi; M. Movahhedi Dehnavi; I. Adhami

Volume 41, Issue 1 , June 2018, , Pages 69-82

https://doi.org/10.22055/ppd.2018.13551

Abstract

Abstract Background and Objectives The impact of toxicity of heavy metals such as cadmium in living organisms is a major global concern. Plant kingdom also is not exempted from ... Read More Abstract Background and Objectives The impact of toxicity of heavy metals such as cadmium in living organisms is a major global concern. Plant kingdom also is not exempted from the adverse effects to exposure of heavy metals. This study was conducted in order to investigate the effect of different priming on seed germination indices of sorghum under Cadmium chloride and nitrate stress condition in laboratory. Materials and Methods The germination experiment was carried out as factorial based on a completely randomized design with four replications. The first factor was heavy metal treatments including 7 levels of cadmium chloride and nitrate, each in four levels (0, 200, 400 and 600 mM) and the second factor included 9 levels: gibberellic acid priming at concentrations of 400 and 800 mg/l, salicylic acid in two levels 0.3 and 0.6 mM, potassium nitrate with concentrations of 1 and 2% and concentrations of -3 and -6 bar of PEG and non-priming. Results The results of the germination experiment showed that the highest and lowest seed germination rates and percentage were obtained in 200 mM of cadmium nitrate and 600 mM of cadmium nitrate and chloride treatment, respectively, while 0.3 and 0.6 mM of salicylic acid application increased the germination rate. The highest and lowest length and weight vigor index were observed in 0 mM cadmium and 600 mM of cadmium chloride respectively, that 800 mg/l of gibberellic acid application leads to increasing the vigor index. Catalase activity in seed sorghum was increased by increasing of cadmium concentrations but decreased by using different priming. Discussion In relation to the slow germination under stress cadmium cell membrane, probably one of the important points is that the severely damaged cells leak out and vigor will be reduced. Priming with the reconstruction of damaged cells, reduces barriers to the growth of the fetus, increases the quality and quantity of protein synthesis, and increases tolerance to environmental stresses. Cadmium also reacts to sulfhydryl groups in the structure of enzymes and proteins. Plant water relations and gas exchange pores have a negative effect on processes of respiration and photosynthesis and increase production of reactive oxygen species in plant cells causes. Active oxygen species due to the desire for high electron affinity, and the basic biomolecules such as lipids, cells, proteins and nucleic acids can cause damage.

Comparison of Direct Seeding and Transplanting Systems in Maize (Zea Mays L.) Under The Usual and Early Planting Dates

Zh. Zaraei; H. Heidari; I. Nosratti; M. Khoramivafa

Volume 41, Issue 1 , June 2018, , Pages 97-108

https://doi.org/10.22055/ppd.2018.13553

Abstract

Abstract Background and Objectives The use of transplanting is a safe method for adequate crop establishment. Its benefits include increasing yield, reducing the growing season, improving ... Read More Abstract Background and Objectives The use of transplanting is a safe method for adequate crop establishment. Its benefits include increasing yield, reducing the growing season, improving weed control, increasing water use efficiency, improving seedling establishment and increasing crop growth rate. Transplanting increases crop yield compared with direct seeding, this compensates for more cost of transplanting. Transplanting also increases maize yield compared with direct seeding through increasing radiation use efficiency and harvest index. The experiment was aimed to assess direct seeding and transplanting system under the usual time and early planting date for achieving maximum maize seed yield and dry matter. Materials and Methods The experiment was conducted at Research Greenhouse and Field, Campus of Agriculture and Natural Resources, Razi University during two years (2015 and 2016). In the first year, factors included three planting methods (seeding, 4-week transplanting and 6-week transplanting) and two sowing dates (early sowing, common date sowing). In the second year, treatments included 6- week transplanting at early sowing (superior treatment in the first year) and seeding (control). Studied traits included plant height, leaf number, fresh weight, dry weight, stomatal conductance, SPAD, chlorophyll, leaf area, leaf relative water content and yield traits such as ear weight, ear length and diameter, seed number per ear row, row number per ear, 100-seed weight and seed yield. Data were analyzed by SAS software. Means were compared using LSD test. Results The first year results showed that early sowing increased plant height, SPAD index and specific leaf weight compared to usual sowing date. 6-week transplanting at early sowing had the highest dry matter production and leaf to stem ratio. The second year results showed that transplanting increased the leaf number, chlorophyll content, fresh and dry weight, leaf area, ear length, ear diameter, seed number per ear row, row number per ear, ear weight, seed yield, 100-seed weight and tassel weight compared to direct seeding. Discussion Yield increase in transplanting was probably due to high leaf area and plant height that plants greatly used environmental conditions such as light and water. So seed number per ear row, row number per ear and ear length were high. In conclusion, 6-week transplanting at early sowing (29 March) is suggested to achieve the highest seed yield in Kermanshah. Maize transplant ages except the ages studied in the experiment are recommended for the next experiments.

Modeling the Effect of Plant Density on Leaf Production and Senescence of Wheat in Terminal Stage Water Holding Conditions

S.A. Razavi; H. Hamidi; Gh. Azizi; R. Asghari

Volume 41, Issue 1 , June 2018, , Pages 117-129

https://doi.org/10.22055/ppd.2016.12428

Abstract

Abstract Background and Objectives Wheat (Triticum aestivum L.) is one of the world's major cereal crops. Approximately, one sixth of the total arable land is cultivated with wheat. ... Read More Abstract Background and Objectives Wheat (Triticum aestivum L.) is one of the world's major cereal crops. Approximately, one sixth of the total arable land is cultivated with wheat. Plant density is an important management factor on crop yield. A major component in a crop growth model is leaf area development which has a major influence on photosynthesis and transpiration. Leaves senesce because of the natural biological process of ageing, but the effect of water deficit can markedly reduce leaf longevity. The aim of this research was to model the effect of plant density on the production and aging leaves of two wheat cultivars (Gascojen and Pishtaz) under irrigation cut off conditions at the end of growth period. Materials and Methods In order to model of leaf production and senescence in wheat, the experiment was conducted as a factorial based on randomized complete block design with four replications. The experiment was carried out at research farm of Saleh abad, Torbatjam, Iran in 2011. Treatments of this experiment were plant densities (50, 100, 200, 300, 400 and 500 plant in m2) and cultivars (Gaskojen and Pishtaz). In this experiment, irrigation was removed in stem elongation and seed development stages. Results Phyllochron in wheat approximately was 102 GDD and showed ending after receiving 900 GDD. Plant density had no effect on leaf appearance and phyllochron. Leaf senescence in the main stem started when the main stem had about 5 leaves and proceeded at a rate of 0.7 per unit increase in GDD. Leaf production per plant versus main stem leaf number occurred in two phases; phase 1. Production increased when plant leaf number occurred with a slower and density-independent rate: phase 2. Production increased with a higher and density-dependent rate of leaf. A close relationship was found between the fraction of senesced leaves per plant and the same fraction on the main stem. Leaf lifetime average decreased with increasing density. Gaskojen was paramount to pishtaz variety in number and lifetime of leaf. Discussion The results showed that leaf production and senescence of wheat in different plant densities on terminal stage water holding conditions could be quantified using different equations

Effect of zeolite on root dry matter and yield parameters of wheat in polluted soil by chemical weapons

A. Azogh; S.K.i Marashi; T. Babaeinejad

Volume 40, Issue 4 , March 2018, , Pages 21-30

https://doi.org/10.22055/ppd.2018.13444

Abstract

Abstract Background and Objectives Nowadays, regarding the adverse effect of war and use of military weapons in the environment and also its limitations against cereal cultivation and ... Read More Abstract Background and Objectives Nowadays, regarding the adverse effect of war and use of military weapons in the environment and also its limitations against cereal cultivation and population growth, the use of lands affected by military weapons in order to produce foods for human is a critical necessity. One of the most effective factors on wheat yield management is the application of zeolite as a source of manure and monitoring heavy metal concentrations affected by this mineral. The best option is to use zeolites as inorganic fertilizers and also for monitoring polluted by the mineral elements. So, studying the effect of zeolite on yield characteristics of wheat in polluted soil with chemical weapons seems to be necessary. Materials and Methods This experiment was carried out in a completely randomized factorial design with three replications where the treatments were polluted and non-polluted soil samples and four amounts of zeolite (0, 0.5, 1.5 and 2.5 % w/w). Results The results showed that the effect of zeolite on root dry matter was significant in polluted and non-polluted soils. The most amount of applied zeolite led to increasing dry matter to 11.11 g/pot in polluted soil and 6.93 g/pot in non-polluted soil. Also, the effect of zeolite on 1000-grain weight in polluted and non-polluted soils was significant. The maximum 1000-grain weight was observed in 2.5 % zeolite in polluted soil and the minimum was observed in non-used zeolite treatment in non-polluted soil. Effect of zeolite treatment on number of grains per spikelet and number of spikelet per spike was not significant in non-polluted soil. Results of this experiment showed that the effect of zoelite on grain yield in polluted and non-polluted soil was significant. The maximum grain yield was observed in 2.5% zeolite treatment with 63.2 g/pot and the minimum was obtained in non-used zeolite treatment in non-polluted soil with 8.8 g/pot. Discussion In general, the zeolite has a significant effect on agronomic traits and yield of wheat. That was due to favorable physical and chemical properties, such as porosity, air permeability, cation exchange capacity, enhancing the long-term availability of nutrients and trapping heavy metals of bombs and weapons and reducing the negative impact of these elements in the soil, which lead to plant health.

Evaluating the Wheat (Triticum aestivum) Yield Loss Caused by Wild Oat (Avena fatua) Interference at Nitrogen Different Levels

j. pourreza

Volume 40, Issue 3 , December 2017, , Pages 41-52

https://doi.org/10.22055/ppd.2017.18933.1372

Abstract

Abstract Background and Objectives Wild oat was described as a vigorously growing weed with a capability to attain greater height, and establish and develop extensive leaf area and ... Read More Abstract Background and Objectives Wild oat was described as a vigorously growing weed with a capability to attain greater height, and establish and develop extensive leaf area and horizontal branches when moisture and nutrients are not limiting. Fertilization is an important agronomic strategy used extensively to increase crop yield. Although, the effect of fertilizers is extensively investigated in wheat, there is little information to assess the effect of fertilizer application on wheat yield loss due to wild oat interference. The objective of this study was to investigate the wheat yield loss caused by wild oat interference at nitrogen different levels. Materials and methods In order to evaluate the wheat yield loss caused by wild oat interference at different nitrogen levels, a field experiment was conducted at a farm in Ramhormoz city (latitude 31.16°N, longitude 49.36°E and 151 m asl), south-west of Iran in 2011-2012. The experiment was designed as a randomized complete block with a split plot arrangement with nitrogen fertilizer (N0: unfertilized control, N1: the use of 150 N Kg ha-1 before wheat seeding and N2: the use of 50 N Kg ha-1 before wheat seeding + 100 N Kg ha-1 at late tillering stage of wheat) as the main plot and wild oat density (D0: weed- free control, D1: 25, D2: 50, D3: 75 and D4: 100 plants m-2) as the subplot with three replications. Results A hyperbolic function was used to describe yield loss-density relationship. Increasing wild oat density had asymptotic-type effect on wheat yield loss. Initial slope (i) of the rectangular hyperbola model was a significantly greater when nitrogen fertilizer was applied. Moreover, for the rectangular hyperbola model, there was significant effect of nitrogen application on estimated maximum wheat yield loss (A). Application of 150 N Kg ha‑1 (N treatment) \before crop seeding resulted in a greater competitive ability of wild oat than other treatments. Discussion The results of this study suggest that the application of nitrogen fertilizer increases wild oat competitions when wheat fields infest with wild oat. Although the wheat yield loss was increased by N application, a such reduction was more recorded at N application than multistage-applied N. Greater knowledge of the effect of N on weeds and crop grown in competitive mixtures may allow a better understanding of why differences occurred among previous studies and aid development of fertilization strategies to reduce weed competition with crops.

Evaluating the Effect of Dry Residues Plant Hairy Vetch (Vicia vilosa Roth) And Plant Probiotics on Reducing the Infection of Branched Broomrape (Orobanche ramosa) In Tomato (Solanum lycopersicum Mill)

I. Nosratti; s. amiri; Gh. Mohammadi; D. Kahrizi; R. Sharifi

Volume 40, Issue 3 , December 2017, , Pages 65-76

https://doi.org/10.22055/ppd.2017.19792.1406

Abstract

Abstract Background and Objectives Tomato (Solanum lycopersicum Mill) is one the most important economic crop in the world and Iran. Broomrape is the main constrain of tomato ... Read More Abstract Background and Objectives Tomato (Solanum lycopersicum Mill) is one the most important economic crop in the world and Iran. Broomrape is the main constrain of tomato production. Some Orobanche species such as O.cumana or O. crenata are specialist in parasites of a small group of genera or species, while others have a much broader spectrum of hosts as is the case of O. ramosa. The available control methods have not proven to be as effective, economical and applicable as desired; thus, the only way to cope with the weedy root parasites is through an integrated approach, employing a variety of measures like resistant cultivars, plant probiotics and allelopathic plants in a concerted manner. Materials and methods Hence the aim this study was to determining the susceptibility of various cultivars of tomato to infection by O. ramosa and effect of allelopathic hairy vetch and plant probiotics on reducing the O. ramosa invasion. Greenhouse experiment was conducted in the greenhouse of Campus of Agriculture and Natural Resources, Razi University, Kermanshah, Iran in 2016. Treatments were different tomato cultivars including Karoon, Aras, Super strain-B and Sivand, allelopathic hairy vetch cluster, bacteria isolates, including INR7, P2, and E11. The soil of each pot was contaminated with 20 mg seed of O. ramosa. At the termination of the experiment, the number and weight of tomato fruits, dry weight of roots and aerials parts of tomato plants were recorded. Results Our results showed that although the Sivand was the most susceptible cultivar to O. ramosa infection, Karoon cultivar had the highest to levace to branched broomrape. Results of present study revealed that broomrape biomass was positively correlated to decreased tomato biomass. The presence of allelopathic plant hairy vetch increased tomato weight in presence of branched broomrape. The use of probiotic P2 increased the number and weight of tomato in the presence of O. ramosa, while it had no effect on infection of O. ramosa. However, only INR7 probiotic had some inhibitory effect on branched broomrape infection. Discussion Totally hairy vetch had a significant effect on reducing of O. ramosa infection (up to 100% control). Based on these results, it could be concluded that plant probiotics only increase tomato yield without any dirrectly effect to broomrape residues of hairy vetch probably by releasing allelochemical redused orobanche germination infection

Assessment Effect of Cutting Time and Soil Salinity on Quality and Quantity Forage Yield of Five Alfalfa (Medicago Sativa L.) Varieties under Ahvaz Condition

Z. Nekoyanfar; Sh. Lack; Gh.R. Abadouz

Volume 40, Issue 3 , December 2017, , Pages 113-127

https://doi.org/10.22055/ppd.2017.15260.1239

Abstract

Abstract Background and Objectives The cutting schedule imposes strong effects on yield and forage quality of alfalfa varieties. In Khuzestan province (south west of Iran), there are ... Read More Abstract Background and Objectives The cutting schedule imposes strong effects on yield and forage quality of alfalfa varieties. In Khuzestan province (south west of Iran), there are many influential factors on alfalfa cutting time such as temperature, sunlight duration, height of water table and amounts of salts in soil. The aim of this research was to evaluate forage production in continuous cuttings of alfalfa varieties in saline soils of Ahvaz conditions. Materials and Methods In order to study the effect of cutting time on quantitative and qualitative yield of alfalfa varieties an experiment was carried out as split plots in time, based on randomized complete blocks design (RCBD) with four replications in saline soil (Electrical conductivity=7.5 ds.m-1) at the research farm of Khuzestan Agricultural and Natural Resources Research Center in 2011 and 2012 crop seasons. The main plot included varieties (Mesasirca, Baghdadi, Nikshahri and Bami) and the sub plot included three cutting times (23 Aug., 1 Oct. and 20 Dec.). These cutting times characterized, summer cut, first autumn cut and second autumn cut. Nine traits including Fresh Forage yield, Dry Forage yield, Leaf stem Ratio, Crude protein, Crude fiber, Na concentration in plant, Ca concentration in plant, Na/Ca were determined. Concentrations of Na and Ca in plant were assessed by using flame photometer. Results The results of ANOVA showed that genotypes had a significant effect on all of traits, except Leaf Stem ratio, Ca concentration in plan, Na /Ca. The highest dry forage yield (4.93 t.ha-1) and fresh forage yield (15.15 t.ha-1) belonged to Baghdadi in the second autumn cut. The lowest Crude Fiber percentage was owned by Bami in the second autumn cut (21.32%) and Mesasirca in the second autumn cut (21.35%) which did not have a significant difference with each other. The highest amount of Na/Ca trait belonged to Baghdadi in the first autumn cut and the lowest Na/Ca belonged to Bami in summer cut. Baghdadi variety at the second cutting treatment has the highest (0.95%) Na concentration and Nickshahri at summer cutting has the lowest amount of Na (0.44%). Mesasersa (45.9 cm) and Baghdadi (45 cm) varieties had the highest plant height; also, Nickshahri (41.1 cm) and Bami (43.1 cm) had the lowest plant height. Discussions Considering results of this research, it is suggested that among varieties, Mesasirca and Baghdadi were the best genotypes and the second autumn cut has suitable conditions for producing of alfalfa high forage quantity and quality.

Effect of Seed Deterioration on Physiological and Biochemical Traits of Oil Flax (Linum usitatissimum L. Norman var.) Seed

H. Balouchi; R. Ostadian Bidgoly

Volume 40, Issue 2 , September 2017, , Pages 37-52

https://doi.org/10.22055/ppd.2017.13116

Abstract

Background and Objectives Seed deterioration is a natural phenomenon that occurs in all seeds and leads to gradual decline of seed viability during storage. However, the rate of seeds ... Read More Background and Objectives Seed deterioration is a natural phenomenon that occurs in all seeds and leads to gradual decline of seed viability during storage. However, the rate of seeds age depends upon their physiological status, genetic constitution and storage conditions. The lipid peroxidation through the production of free radical plays an important role in the loss of seed viability during seed storage. Material and Methods In order to investigate the effect of deterioration on germination indices and enzymes activity of the flax oil seed, a factorial experiment was conducted based on a Completely Randomized Design with four replications in the seed laboratory of Yasouj University in 2015. The factors included 4 levels of temperature (15, 25, 35 and 45oC) and moisture content (5, 9, 13 and 17%). With relation intended seed moisture, Hampton and Teckrony (1995) was calculated. After determining the moisture content of the seeds in envelopes of aluminum foil was placed, then the amount of water the need added and to ensure that the packaging and moisture exchange with the outside world for 24 hours at 15 °C were identical to the seed moisture and then for 6 months in storage conditions at temperatures of 15, 25, 35 and 45oC were kept. Results Analysis of variance showed that the single effects including temperature and seed moisture content experimental treatments for traits including germination percentage, germination rate, seedling vigor index (weight), activity enzymes antioxidant catalase, superoxide dismutase and ascorbate peroxidase, soluble proteins, electrical conductivity and oil percentage were significant (P≤0.01). Also, the interaction temperature and seed moisture content of all treatments except for enzyme, activity of superoxide dismutase and ascorbate peroxidase were significant (P≤0.01) but were significant (P≤0.05) for the activity of superoxide dismutase and ascorbate peroxidase. The results showed that with increasing temperature and moisture content, all the physiological and biochemical traits, except for electrical conductivity, decreased. The decrease in germination was also associated with a decrease in the activity of antioxidant catalase, superoxide dismutase and ascorbate peroxidase and as a result the antioxidant system was not sufficient to protect seeds against free radical damage. With the increase in reactive oxygen species, lipids peroxidation increased, probably due to the destruction of cell membranes, increased electrical conductivity seed the negative correlation between the electrical conductivity and the activity of the enzymes antioxidant indicator of the issue. Discussions Thus, oil flax seed deterioration was closely related to decrease in the activities of free radical detoxifying enzymes and increased lipid peroxidation. In general, the best flax seed storage condition is at 15°C and 5 percent moisture content.

Effect of plant growth promoting rhizobacteria on ecophysiological characteristics of two wheat cultivars under reinfed condition

M.H. Ansari; D. Hashemabadi; M. Yadegari

Volume 40, Issue 2 , September 2017, , Pages 75-88

https://doi.org/10.22055/ppd.2017.13121

Abstract

To evaluate the effect of PGPRs on ecophysiological characteristics of two wheat cultivars a factorial experiment with three replications was carried out under rainfed conditions in ... Read More

Reduction of the impact of dust on quantitative and qualitative characteristics of white seedless grape variety by washing with d-octil

M. Behrouzi; H. Nouri; S. Bazgeer; M.A. Nejatian; D. Akhzari

Volume 40, Issue 2 , September 2017, , Pages 113-125

https://doi.org/10.22055/ppd.2017.13124

Abstract

Extended AbstractBackground and ObjectivesAtmospheric dust is one of the pollutants that is considered the biggest environmental problems in different parts of the world. Dust can affect, ... Read More Extended AbstractBackground and ObjectivesAtmospheric dust is one of the pollutants that is considered the biggest environmental problems in different parts of the world. Dust can affect, either directly or indirectly, both plants and crops. The direct impact is on critical activities such as plant photosynthesis, evapotranspiration, stomata conductance, pigments, leaf temperature and breathing. The indirect effect may be influenced on reduction of the fruit quality and yield. This study aims at investigating the adverse effects of dust on grape vineyard in Malayer, Hamedan Province, Iran.Materials and methodsThe Experiment was conducted in randomized completely block design for evaluation of the effects of dust on White Seedless Grape (Vitis vinifera L.) in the Grape Research Institute, Malayer, on 27 vines during 2014-2015 year. the first treatment was dust (9 plants) that soil samples were collected from Khuzestan province and after preparation was applied on the plant in four growth stages using mechanical devices; the second treatment, solution treatment that dusts were washed with water and di octyl; the third one was control (9 plants) treatment. Chlorophyll a and b, carotenoids, vegetative traits such as length of cane, length of leaf, leaf area, length of peduncle, internodes and reproductive traits such as fruit set, number of berry and number of bunch, length of bunch, number of berries in bunch, weight of berry and brix of berry were measured. ResultsThe results revealed that leaf pigments reduction was caused due to deposition of dust on leaf surface and differences between treatments was significant at the 5% probablity level. The vegetative traits viz. length of peduncle, internodes and leaf area were small in dust treatment and the difference between treatments was significant. Length of cane in the second stage was significant and longest canes were in the solution treatment. Fruit set, number of berries and number of bunch were reduced in dust treatment and a significant difference was observed between treatments. In addition, control and solution treatments were in one class. Moreover, sugar in a single grape was decreased up to 7 % in dust treatment as compared to other ones. DiscussionDust treatment had more effect on b chlorophyll in the first, the third and the fourth growth stages of grape as compared to a chlorophyll and Carotenoid. In addition, the difference among means was significant at 5 % level. The previous studies showed that the leaf dust accumulation decreased pigment content of plant )Kumar Rai and panda, 2014(. Leghari et al., 2013 confirmed that roadside plant could be damaged by dust and had shorter length of cane. The rate of fruit set in control, dust and solution treatments were 36%, 21% and 33%, respectively. Moreover, the percentage of brix in control, dust and solution treatments, were 20%, 7% and 15%, respectively. The researches revealed that dust could reduce photosynthesis and consequently the amount of brix in grapes (Chaurasia et al., 2013) which were in agreement with our study.

Effect of Thiobacillus and Nitrocara Biological Fertilizers and Foliar Application of Zinc and Iron on Some Qualitative Characteristic and Remobilization of Rapeseed (Brassica napus L.)

R. Jashni; E. Fateh; Amir Aynehband

Volume 40, Issue 1 , June 2017, , Pages 1-14

https://doi.org/10.22055/ppd.2017.12067

Abstract

Background and Objectives Oil crops could be considered as a valuable resource for providing the plant oil for cooking. Canola is one of the main oil crops the third oil crop after ... Read More Background and Objectives Oil crops could be considered as a valuable resource for providing the plant oil for cooking. Canola is one of the main oil crops the third oil crop after soybean and oil palm. The macro and micro nutrients have an important role in plant nutrition. The biological fertilizer could be effective in sustaining agriculture program. Material remobilization is an important process in transporting the nutrition from leaf and stem to grains. The nitrogen fertilizer increases wheat grain yield, Nitrogen and phosphorus uptake, grain protein, zinc and iron. Application of nitrogen fertilizer improves the canola biological yield and stem dry weight at flowering stage. The main goal of this research was the comparison of the micro and macronutrients and biological fertilizer on some qualitative characteristics and remobilization of Rapeseed (Brassica napus L.) Material and Methods In order to evaluate the effect of biological fertilizers and micronutrients on some qualititive traits and remobilization of rapeseed (Brassica napus (L.) var. Hyola 401), an experiment was conducted in the Research Station of Shahid Chamran University of Ahvaz, Iran in 2012-13. The experimental design was factorial based on randomized complete blocks design with three replications. The treatments were microelements in six levels (control, zinc sulfate (2 and 4 cc.lit-1), iron chelate (2 and 4 cc.lit-1) and combined zinc and iron fertilizers (2 cc.lit-1)) and the second factor was application of biofertilizers in 3 levels (seed inoculation with Thiobacillus with Sulfur Bentonite, Nitrocara + Thiobacillus Sulfur Bentonite and control). The canola (cv. Hyola401) was seeded on 13 Nov. 2013 and harvested on 21 Apr. 2014. Each plot size was 7.2 m2 consisting of 5 rows of canola plants. Foliar application of zinc sulphate and iron was done at 2 %4 /1000 concentration in stem elongation and flowering stages. Results Due to the interaction of biological fertilizer and micronutrient elements, the highest plant individual yield (10/62 g/m2) and the lowest remobilization efficiency(13.85%) were achieved from Nitrocara + Thiobacillus bacteria with combined zinc and iron (2cc.lit-1). The highest oil percent (48.47%) was also revealed at Thiobacillus bacteria with combined zinc and iron (2cc.lit-1), While the lowest oil percent (31%) was obtained at control treatment. Discussions Finally, the results of this study revealed that the canola seeds inoculated with bio-fertilizers and with foliar application of micro-nutrients reduced consumption of chemical fertilizers such as nitrogen fertilizers can be useful in improving the quantitative and qualitative characteristics of oil varieties of canola. Also, the highest individual plant yield was obtained by application of Thiobacillus + Nitrocara and Zinc + iron application. The results suggested that the microelements not onlt increased the grain zinc and iron content (36-41%), but also improved economical yield and grain oil contents.

Effects of Chemical and Organic Fertilizers on Some of Growth and Quality Indices of Tobacco (Nicotiana tabacum L.)

Z. Reisi; Mahmoud Reza Tadayon; S. Fallah

Volume 40, Issue 1 , June 2017, , Pages 15-28

https://doi.org/10.22055/ppd.2016.12451

Abstract

Background and Objectives The yield and quality of tobaco plants depends upon several factors, such as nutritions and good cultivation practice which plays a significant role in leave ... Read More Background and Objectives The yield and quality of tobaco plants depends upon several factors, such as nutritions and good cultivation practice which plays a significant role in leave pruduction and the qualitative characteristics such as nicotin content. The main purpose of fertilization is to consider quantity and quality in tobacco production. The objective of this study was to evaluate the effect of chemical and organic fertilizers on some of growth and quality indices of tobacco in field conditions. Material and Methods In order to study the effects of organic and chemical fertilizers on physiological, growth indices and quality of tobacco (Burley Cv.) an experiment was counducted at Shahrekord University in 2013 as a randomized complete block design with three replications.Treatments included compost based on the tobacco demand, vermicompost based on the tobacco demands, chemical fertilizer based on the tobacco demands, 50 percent compost + 50 percent chemical fertilizer, 50 percent vermicompost + 50 percent chemical fertilizer and control. Sowing in nursery was done in March 2013 and transplanted to field in May 2013. After plowing and disking and leveling by rotary, tobacco seedling was transplanted in the main field. In the current study the space between rows was 80 cm and between plants on rows was 50 cm. The area of every plot was 5×4 m2. Traits of leaf area index (LAI), net assimilation rate (NAR), crop growth rate (CGR), cutters dry weight, nicotine content and ash leaves were evaluated. The data were analyzed by using version 9.1 SAS. Least Significant Difference test was used to compare the means at 1% of significance. Also, the figures were drawn by Excel 2010 software. Results The results indicated that the organic and chemical fertilizers increased leaf area index (LAI), net assimilation rate (NAR), crop growth rate (CGR) and cutters dry weight. Among the treatments, chemical fertilizer had higher values of LAI, CGR and NAR. Maximum cutters dry weight (2833 kg ha-1) were obtained from chemical fertilizer (three fold increased compared to control treatment). After chemical fertilizer treatment, maximum values of LAI, CGR, NAR and cutters dry weight were obtained from the compost treatment. Vermicompost treatment had the highest nicotine content and the lowest ash leaves. The results of this study indicated chemical fertilizer and then compost treatments had the greatest effect on growth parameters and cutters dry weight, however, the qualitative characteristics of plants treated with vermicompost were better than other treatments. Discussions The difference in the growth indices and cutters dry weight between organic and chemical fertilizer treatments could be due to differences in the amount of mineral nitrogen available for plant. This increase in the chemical fertilizer treatments can be due to the positive effect of nitrogen on the dry matter changes and increasing the plant's leaf area. Thus, for better quality, vermicompost and for more dry matter production, chemical fertilizer or compost are recommended.

Planting Date Effect on Yield and Yield Component of Three Wheat Cultivars in Competitive With Wild Oat

M. Asadnezhad; M. Farzaneh; M. Meskarbashee

Volume 40, Issue 1 , June 2017, , Pages 55-68

https://doi.org/10.22055/ppd.2016.12431

Abstract

Background and Objectives Wheat cultivars that have suppression potential of weeds besides high yield can be a weed management method in sustainable agriculture. Materials and Methods ... Read More Background and Objectives Wheat cultivars that have suppression potential of weeds besides high yield can be a weed management method in sustainable agriculture. Materials and Methods In order to study the competition ability of some wheat cultivar with wild oats in three planting dates, a field experiment as factorial in complete randomize blocks with three replications was carried out at the Agricultural Research Station of Shahid Chamran University in 2013-2014. In this experiment, the factors included planting dates (16th November, 1st December and 16th December), wheat cultivars (Star, Chamran and Virinak) and competition with wild oats (with wild oat, without these weeds). Results The result showed, in the competition status, Star cultivar had a higher grain yield than other cultivars in the first planting date (16th November) whereas, it had no significance different with Star and Chamran in the second planting date (1st December). When the cultivars were planted as monoculture, the highest grain yield belong to Star in the first planting date followed by the second planting data. In this condition, Virinak and Chamran in the first planting date had the lowest grain yields. Effect of the planting date on grain yield was the same trend as grain/spike; however, the high correlation with grain/spike (81%) and with thousand grains weight (59%) confirmed it. Three cultivars obtained the highest of competition index in 1st December. Although the competition and planting date resulted in decrease of grain yield, according to this investigation, the best planting date was determined 16th November and 1st December for Star cultivar. When the planting was delayed (16th December), virinak was a better choice. Discussions According to the different growth, competitive and morphological characteristics of wheat cultivars, their responses varied in different planting dates in competition against wild oats. The grain yield of Chamran, Star and Virinak cultivars decreased 27, 25 and 23 respectively by competition with wild oats. In this respect, the dry matter of planted wild oats on 1st December than the former and latter planting dates was further damaged by every three wheat cultivars (Star, Chamran and Virinak) besides higher grain yield of wheat cultivars whereas the climatic conditions of this year with previous years differed, suggesting wheat planting with short delay as an agronomy method was assayed in the different years with regard to temperature and hydrothermal effect on wild oats germination and growth in comparison with wheat.

Effects of Different Concentrations of Cytokinin and Auxin Hormones on Yield and Yield Components of Grain Maize (Zea mays L.) in Salinity Conditions

D. Davani; M. Nabipour; H. Roshanfekr Dezfouli

Volume 40, Issue 1 , June 2017, , Pages 69-80

https://doi.org/10.22055/ppd.2016.12433

Abstract

Background and Objectives Maize (Zea mays L.) belongs to the family of Poaceae and it is the third important cereal crop of the World after wheat and rice. Salinity is one of the major ... Read More Background and Objectives Maize (Zea mays L.) belongs to the family of Poaceae and it is the third important cereal crop of the World after wheat and rice. Salinity is one of the major environmental factors limiting plant growth and productivity. Maize is sensitive to salinity. Ba is one of the cytokinins known to significantly improve the growth of crop plants grown under salinity. IBA is also known to play a significant role in plant tolerance to salt stress. However, little information appears to be available on the relationship between salinity tolerance and auxin or cytokinins levels in plants. In this respect, the objective of this study was to study the effects of sprying of cytokinin and auxin hormones on yield and yield components of grain maize in saline conditions. Materials and Methods To study the effects of cytokinin (0, 75 and 100 mg.l-1) and auxin (0, 15, 20 mg.l-1) hormones on yield and its components of grain maize (Zea mays L.) under saline conditions, an experiment was conducted during 2013 in the research station of Bushehr Agricultural and Natural Resources Research Center in a factorial design based on randomized complete design with three replications. Cytokinin (Benzyl Adenine, Merck) and Auxin (Indole-3-Butiric Acid, Merck) were sprayed on the entire plant in the evening. Data was analyzed using the SAS (Ver.9.1) and significance of the differences between the means was conducted using LSD test. Results Results of Analysis of Variance showed that the highest grain yield was obtained by application of cytokinin and auxin with concentrations of 100 and 20 mg.l-1, respectively. The characteristics of plant height, stem diameter, ear length, row number per Ear and biological yield increased by sprying 100 mg.l-1 cytokine. In the treatment of without spraying auxin, the highest kernel number per row was obtained by spraying cytokinin at 75 mg.l-1 while in the treatment spraying auxin at 15 and 20 mg.l-1 the highest kernel number per row was obtained by sprying 100 mg.l-1 cytokinin. In three levels of cytokinin, application of auxin increased 1000 kernel weight. The highest harvest index was obtained by application of auxin at 20 mg.l-1. Discussions It has been found that both auxin and cytokinin may have a role in mediating cell division in the endosperm during the grain-filling stage. Therefore, these hormones might regulate the grain capacity (sink size) for the accumulation of carbohydrates. It was found that IAA actively participated in the mobilization and accumulation of carbohydrates in seeds. Auxin and cytokinins hormones are also thought to be involved in regulating sink strength either by mediating the division and enlargement of endosperm cells or by controlling the import of assimilates to the sink. Results of this study demonstrated that sprying cytokinin at 100 mg.l-1 and auxin at 20 mg.l-1 reduced the effects of salinity on yield and increased the grain yield.

Identification of Restoring Fertility and Maintainer Rice Varieties Using SSR Marker

GH. Kiani

Volume 40, Issue 1 , June 2017, , Pages 81-86

https://doi.org/10.22055/ppd.2016.12363

Abstract

Background and Objectives In classical plant breeding, restorers are identified by the cross test, of existing varieties with cytoplasmic male sterilty (CMS) lines and evaluating F1 ... Read More Background and Objectives In classical plant breeding, restorers are identified by the cross test, of existing varieties with cytoplasmic male sterilty (CMS) lines and evaluating F1 progenies in terms of fertility of pollen and spikelete. Lines showing more than 80 percent fertility of pollen and spikelete are considered as restorer lines. This study aimed at applying marker assisted selection (MAS) using linked SSR markers to restoring fertility (Rf) genes for identification of restorer and maintainer lines in hybrid seed production in rice. Materials and Methods In this study, 15 rice varieties wer planted at the research farm of Sari University of Agricultural Sciences and Natural Resources and marker assisted selection (MAS) was used for identification of two Rf genes located on chromosomes 1 and 10 of rice using SSR markers RM171, RM258 and RM3148. The PCR reaction was performed at 94 °C for 5 min; then for 35 cycles of 94 °C for 1 min; 55°C for 1 min; 72 °C for 2 min followed by 72 °C for 5 min. PCR products were resolved by electrophoresis in agarose gel stained with ethidium bromide and then photographed. Results Results of molecular analyses using microsatellite markers RM171, RM258 and RM3148 linked with Rf genes showed that rice varieties namely Hashemi and Deylamani had both Rf genes in their genomes and were considered as putative restorers and were suggested to be test crossed with male sterile lines to assess their F1 generations. Rice varieties namely Shiroudi, Tabesh, Fajr and Shafagh were identified as maintainers. Thus backcross breeding method is suitable for transferring sterile cytoplasm to them for development of new CMS lines. Discussions Identifying restorer lines by means of molecular marker technology is more cost effective and reliable than phenotypic assays especially in hybrid rice production. Restorer and maintainer lines identified in this study could be used for promotion of hybrid rice technology in the country.

Estimating of Leaf Area in Safflower Using Vegetative Characteristics

b T; A S; H S

Volume 39, Issue 4 , March 2017, , Pages 115-123

https://doi.org/10.22055/ppd.2016.12426

Abstract

Background and Objectives Accurate measurements of leaf area are important for agronomic and physiological studies. Leaf area can be calculated in two ways: direct and indirect. Direct ... Read More Background and Objectives Accurate measurements of leaf area are important for agronomic and physiological studies. Leaf area can be calculated in two ways: direct and indirect. Direct methods for determining leaf area are a destructive method and need a planimeter to measure the total leaf area attached to shoots which are all time-consuming and tedious approaches. All direct methods are similar in that they are difficult, extremely labor-intensive, require many replicates to account for spatial variability in the canopy, and are therefore costly in terms of time and money and also destructive. In the indirect methods, leaf area was estimated through some crop vegetative characteristics which are less costly and time-consuming. Therefore, the objective of the present study is to examine different relationships between leaf area and some vegetative characteristics in safflower and to select the best characteristic for estimating leaf area. Materials and Methods The field experiment was conducted with four safflower cultivars (411, Sina, Esfahan and Sofeh) in three planting dates (4April, 25 April and 16 May 2012) as arrangement factorial in randomized complete blocks design. During the growing season, every 5 or 10 days, the leaf area was measured by the planimeter (T Devices, Cambridge, UK). At the same time, leaf dry weight (LDW), stem dry weight (SDW), vegetative dry weight (VDW), node number on main stem (MSNN) and leaf number on main stem (MSLN) were measured. The relationships between leaf area and these vegetative characteristics were examined by the regression. Consequently, the best characteristic for estimating leaf area was selected by the high R2, r and low RMSD. Results In this study, regression models were developed for estimating leaf area (LA) from measurements of main stem leaf number (MSLN), and main stem node number (MSNN), leaf dry weight (LDW), stem dry weight (LDW) and vegetative dry weight (VDW). On the basis of RMSD and coefficient correlation (r) between predicted and observed leaf area, LDW was found to be the best independent characteristic for determining the leaf area by the linear model. The values of RMSD varied from 39.9 to 61.4 and the values of r were higher than 0.96. Once there was no significant difference between model coefficients across cultivars we pooled all data and obtained a generalized linear model for estimating LA in all cultivars (LA=10.6+102.2LDW) with RMSD=52 and r=0.96. Discussions Overall, this study suggests that in the absence of planimeter device, it may be appropriate to estimate leaf area using the relationship between LA and LDW. Also, because of the close relationship between LDW and LA than other relationships, this relationship can be used to estimate leaf area in simulation models.

Genetic Analysis of Grain Yield, Grain Yield Components and some Phonological Traits of Triticale Genotypes.

a Naderi

Volume 39, Issue 3 , December 2016, , Pages 1-14

https://doi.org/10.22055/ppd.2016.12060

Abstract

Background and Objectives Triticale is a crop species resulting from a plant breeder's cross between wheat (Triticum) and rye (Secale). Plant breeders originally wanted to include the ... Read More Background and Objectives Triticale is a crop species resulting from a plant breeder's cross between wheat (Triticum) and rye (Secale). Plant breeders originally wanted to include the combination of grain quality, productivity, and disease resistance of wheat with the vigor and hardness of rye. Triticale is mainly introduced as a crop which is more adapted under low-potential condition than the wheat and other small cereals. Triticale could be used as a feed grain. As a feed grain, triticale is already well established and of high economic importance. The aim of a triticale breeding program is mainly focused on the improvement of quantitative traits, such as grain yield, nutritional quality and plant height, as well as traits which are more difficult to improve, such as earlier maturity and improved test weight. In order to study the relationship between grain yield and its related traits and to select high yielding lines of triticale, this research was carried-out in a low-potential condition. Material and Methods This research was conducted in Ahvaz Agricultural Research station during 2013-2014 cropping season, with 36 lines, using α-lattice design with two replications. Fertilizers were used based on soil test results. Each line was planted in six 6-meter rows with 0.2 meter spacing in Nov.8 and irrigation was done immediately. Days from germination to heading, physiological maturity and ripening stages, and grain yield and its components were determined. Genetic variation coefficient was calculated based on GC={[(Vg-Ve)/r]/M}×100, equation in which GC, Vg, Ve, r and M are genetic variation coefficient, phenotype variance, variance of error, replication and mean trait, respectively. Data were analyzed using MSTATC software. Results Results indicated that genotypes were significantly different for all traits. Ranges of days from germination to ear emergence and physiological maturity were 89-103 and 129-141 respectively. T he highest grain yield (4790 Kg.ha-1) and grain crop growth rate (14.1 g.m-2.day-1) was belonged to line No.29. The highest genetic variation coefficients were obtained from days from germination to ear emergence (43.6%) and biological yield (36.4%). Range of mean grain yield was 1898-4652 Kg/ha and lines No,:5, 8, 15, 17, 20, 22, 23, 26 and 29 with grain yields 4494, 3748, 3820, 3777, 3757, 3717, 4007, 3780 and 4651 Kg.ha-1 respectively, were selected for advanced trails. Discussions Regarding high similarity among grain yields with both grain growth rate (95%) and biological yield (86%) in cluster analysis and high genetic variation of the mentioned traits, the lines with both high biological yielding and grain growth rate were evaluated as the optimum genetic sources for breeding programs of triticale. Lines with both traits have capability to accumulate high amount of dry matter and to allocate a large proportion of this dry matter to grains.

Volume 46 (2023)

Volume 45 (2022)

Volume 44 (2021)

Volume 43 (2020)

Volume 42 (2019)

Volume 41 (2018)

Volume 40 (2017)

Volume 39 (2016)

Volume 38 (2015)

Volume 37 (2014)

Volume 36 (2013)

Volume 35 (2012)

Volume 34 (2011)

Volume 33 (2010)

Volume 32 (2009)

Main Subjects = A: Agronomy

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract

Abstract