Plant Productions

The Effects of Biological and Chemical Nitrogen Fertilizers and Iron Micronutrient on Forge Quality and Yield of Maize (Zea mays L.)

Hoda Mohammadi; Gholamreza Heidari; Yousef Sohrabi

Volume 43, Issue 2 , September 2020, , Pages 185-198

https://doi.org/10.22055/ppd.2019.27736.1678

Abstract

Abstract Background and ObjectivesImproving forage yield and quality is a major concern for the producer. Sustainable crop production requires careful management of all nutrient ... Read More Abstract Background and ObjectivesImproving forage yield and quality is a major concern for the producer. Sustainable crop production requires careful management of all nutrient sources in agroecosystems. Biological fertilizers, including Azospirilum, Azotobacter, Bacillus and Pseudomonas bacteria, can increase plant growth and yield through biological nitrogen fixation and increased solubility of macro elements such as phosphorus. Iron is the most important micro element for crops. Iron is required to perform many plant metabolism and growth activities. The experiment was conducted to investigate the effects of biological fertilizers combined with chemical fertilizers and iron micro element on yield and quality of maize (MV 500 cultivar) forage. Materials and MethodsThe experiment was conducted as a split plot based on randomized complete block design with three replications. The main plots consisted of different levels of urea fertilizer: Nitrokara biofertilizer, 150 kgha-1 urea + Nitrokara biofertilizer (Azorhizobium caulinodans), Super Nitro Plus biofertilizer (Azospirillum, Bacillus subtilis, Pseudomonas fluorescens), Super Nitro Plus biofertilizer + 150 kgha-1 urea without nitrogen fertilizer 450 kgha-1 urea, Nitrokara biofertilizer +300 kgha-1 urea, and Super Nitro Plus biofertilizer + 300 kgha-1 urea. The subplots consisted of two iron levels, including 10 kgha-1 iron chelate (Fe EDTA) and without iron application. The measured traits were crude protein, neutral detergent fiber, acid detergent fiber, ash, leaf to shoot ratio, ear to plant ratio and forage yield. Data were analyzed using MSTATC software. ResultsAnalysis of variance showed that the interaction effects of nitrogen fertilizer sources and iron levels were significant on crude protein, neutral detergent fiber, acid detergent fiber, ash, ear/plant ratio and forage yield. The highest crude protein and ash of maize forage were obtained from supernitroplus + 300 kgha-1 urea and iron application. Control treatment (without nitrogen and iron fertilizers) produced the most ADF and NDF values. The highest dry forage yield belonged to Super Nitro Plus + 300 kgha-1 urea with iron fertilizer and the lowest value obtained from control treatment without N and iron fertilizers. DiscussionThe results of this study showed that the combined application of supernitroplus biofertilizer and urea fertilizer along with iron micro element increased maize forage quality and yield compared to the sole application of urea chemical fertilizer. Microorganisms constituting biofertilizers are very benefitial to the plant. They have the ability to enhance plant growth through increasing nutrient availability and uptake with minimal contribution to the environmental pollution, unlike the use of pure mineral fertilizers. The integration of biofertilizers and moderate mineral N fertilizer application accompanied with iron micro element is highly recommended in the production of maize forage.

Effects of Chemical and Organic Fertilizers on Some of Growth and Quality Indices of Tobacco (Nicotiana tabacum L.)

Z. Reisi; Mahmoud Reza Tadayon; S. Fallah

Volume 40, Issue 1 , June 2017, , Pages 15-28

https://doi.org/10.22055/ppd.2016.12451

Abstract

Background and Objectives The yield and quality of tobaco plants depends upon several factors, such as nutritions and good cultivation practice which plays a significant role in leave ... Read More Background and Objectives The yield and quality of tobaco plants depends upon several factors, such as nutritions and good cultivation practice which plays a significant role in leave pruduction and the qualitative characteristics such as nicotin content. The main purpose of fertilization is to consider quantity and quality in tobacco production. The objective of this study was to evaluate the effect of chemical and organic fertilizers on some of growth and quality indices of tobacco in field conditions. Material and Methods In order to study the effects of organic and chemical fertilizers on physiological, growth indices and quality of tobacco (Burley Cv.) an experiment was counducted at Shahrekord University in 2013 as a randomized complete block design with three replications.Treatments included compost based on the tobacco demand, vermicompost based on the tobacco demands, chemical fertilizer based on the tobacco demands, 50 percent compost + 50 percent chemical fertilizer, 50 percent vermicompost + 50 percent chemical fertilizer and control. Sowing in nursery was done in March 2013 and transplanted to field in May 2013. After plowing and disking and leveling by rotary, tobacco seedling was transplanted in the main field. In the current study the space between rows was 80 cm and between plants on rows was 50 cm. The area of every plot was 5×4 m2. Traits of leaf area index (LAI), net assimilation rate (NAR), crop growth rate (CGR), cutters dry weight, nicotine content and ash leaves were evaluated. The data were analyzed by using version 9.1 SAS. Least Significant Difference test was used to compare the means at 1% of significance. Also, the figures were drawn by Excel 2010 software. Results The results indicated that the organic and chemical fertilizers increased leaf area index (LAI), net assimilation rate (NAR), crop growth rate (CGR) and cutters dry weight. Among the treatments, chemical fertilizer had higher values of LAI, CGR and NAR. Maximum cutters dry weight (2833 kg ha-1) were obtained from chemical fertilizer (three fold increased compared to control treatment). After chemical fertilizer treatment, maximum values of LAI, CGR, NAR and cutters dry weight were obtained from the compost treatment. Vermicompost treatment had the highest nicotine content and the lowest ash leaves. The results of this study indicated chemical fertilizer and then compost treatments had the greatest effect on growth parameters and cutters dry weight, however, the qualitative characteristics of plants treated with vermicompost were better than other treatments. Discussions The difference in the growth indices and cutters dry weight between organic and chemical fertilizer treatments could be due to differences in the amount of mineral nitrogen available for plant. This increase in the chemical fertilizer treatments can be due to the positive effect of nitrogen on the dry matter changes and increasing the plant's leaf area. Thus, for better quality, vermicompost and for more dry matter production, chemical fertilizer or compost are recommended.

Investigating the Effects of Plant Density, Seed Inoculation with Bacteria and Different Nitrogen Fertilizing Methods on Yield, Yield Components and Essential Oil of Fennel (Foeniculum vulgare Mill.)

M. Delfieh; Seyed Ali Mohammad Modarres-Sanavy; R. Farhoudi

Volume 40, Issue 1 , June 2017, , Pages 111-121

https://doi.org/10.22055/ppd.2016.12436

Abstract

Background and Objectives Fennel is one the most important medicinal and aromatic plants which is widely used in food, medicine and cosmetic industries worldwide. This study was carried ... Read More Background and Objectives Fennel is one the most important medicinal and aromatic plants which is widely used in food, medicine and cosmetic industries worldwide. This study was carried out in order to investigate the effects of different nitrogen nutritional systems including chemical, organic and biologic ones at different plant densities on yield, yield components and seed essential oil content and yield of fennel in south western Iran climatic conditions. Materials and Methods To do this research, a field experiment was carried out in 2013-2014 agricultural season at Islamic Azad University of Shoushtar agricultural college in split plot design with 18 treatments in 4 replications based on completely randomized blocks design. Different nitrogen system treatments consisting of N1: Uniformly spreading urea fertilizer in the plot, half at planting time and other at stem elongation, N2: Uniformly spreading half of urea fertilizer in the plot at planting time and spraying the other half at stem elongation on fennel foliage, N3: cow manure, N4: Inoculation of fennel seeds with Azotobacter and Azospirillum, N5: Applying half of required nitrogen fertilizer from cow manure and other half from urea, N6: Applying half of required nitrogen fertilizer from cow manure + inoculation of fennel seeds with Azotobacter and Azospirillum were applied to the main plots. Three fennel densities consisting of FD1: 60 plant/m2, FD2: 80 plant/m2 and FD3: 100 plant/m2 were applied to subplots. Results Based on the results, utilization of the first integrated treatment which consisted of cow manure and urea as chemical fertilizer at 50:50 percent, along with using 100 plant per m2 as a proper crop density achieved production of 94.575 g/m2 seed yield containing 3.375 percent of essential oil. Other findings showed that Azotobacter+ Azospirillum had no positive effect on plant seed yield and essential oil. Discussions The findings of our study showed that replacing 50 percent of required nitrogen with cow manure in fennel could lead to a favorable quantitative and qualitative seed production as well as the treatments which use 100 percent of nitrogen as chemical fertilizers. It seems that nitrogen application with manure probably through increasing organic matter mineralization and mineral absorption, improved the effectiveness of manure. Therefore application of such a combination not only could lead to a desirable fennel quantity and quality, but also is more consistent with environment. Other findings of the present study showed that seed inoculation with bio-fertilizers (Azotobacter + Azospirillum) had no positive effects on plant seed yield and essential oil. For such a result, it could be said that climate and soil conditions and also plant species and varieties are important in bio-fertilizers usefulness and also in determining suitable bacteria species for application.

Effect of Soil Fertilizing Methods on Some Forage Quality and Yield Characterestics of Globe Artichoke (Cynara scolymus L.) Under Greenhouse Conditions

E F; A R; H K; R A

Volume 35, Issue 1 , June 2012, , Pages 71-90

Abstract

To study the effect of organic and chemical fertilizers on forage yield, quality and growth characteristics in globe artichoke (Cynara scolymus L.) a glasshouse experiment was conducted ... Read More

Articles in Press

Current Issue

Volume 47 (2024)

Volume 46 (2023)

Volume 45 (2022)

Volume 44 (2021)

Volume 43 (2020)

Volume 42 (2019)

Volume 41 (2018)

Volume 40 (2017)

Volume 39 (2016)

Volume 38 (2015)

Volume 37 (2014)

Volume 36 (2013)

Volume 35 (2012)

Volume 34 (2011)

Volume 33 (2010)

Volume 32 (2009)

Keywords = Chemical fertilizer

The Effects of Biological and Chemical Nitrogen Fertilizers and Iron Micronutrient on Forge Quality and Yield of Maize (Zea mays L.)

Abstract

Effects of Chemical and Organic Fertilizers on Some of Growth and Quality Indices of Tobacco (Nicotiana tabacum L.)

Abstract

Investigating the Effects of Plant Density, Seed Inoculation with Bacteria and Different Nitrogen Fertilizing Methods on Yield, Yield Components and Essential Oil of Fennel (Foeniculum vulgare Mill.)

Abstract

Effect of Soil Fertilizing Methods on Some Forage Quality and Yield Characterestics of Globe Artichoke (Cynara scolymus L.) Under Greenhouse Conditions

Abstract