Plant Productions

Investigating the physicochemical changes of Golden Delicious apple fruit (Malus domestica cv. Golden Delicious) with the application of chitosan and nanochitosan before harvesting and calcium chloride immersion after harvesting

Fatemeh Eyni Tari; Abdollah Ehtesham Nia; Hassan mumivand; Mohamadreza Raji

Articles in Press, Accepted Manuscript, Available Online from 28 September 2024

https://doi.org/10.22055/ppd.2024.47136.2177

Abstract

Introduction Today, healthy lifestyle has faced a high demand at the global level and this demand has increased the need to preserve or better store fresh food items such as fruits ... Read More Introduction Today, healthy lifestyle has faced a high demand at the global level and this demand has increased the need to preserve or better store fresh food items such as fruits because of their abundant amounts of vitamins and minerals. On the other hand, the increase in post-harvest waste has made it necessary to develop the use of natural compounds compatible with nature and humans, in order to produce products free of harmful substances and with high nutritional value, along with reducing waste. Materials and Methods For this purpose, the present experiment is a factorial in the form of a completely randomized design, in 4 replications and includes the first factor of foliar treatments before and after harvesting, including control treatments (spraying with distilled water), chitosan (50 mg/lit) and Nano chitosan (50 and 100 mg/lit) and immersion of the harvested fruits with calcium chloride solution in the post-harvest phase (0 and 2 %) and the second factor of storage time (at 0, 60, 90 and 120 days) ) was carried out on fruits of Golden delicious apple grafted on MM 111 (Malling Merton 111). The foliar spraying before harvesting was done in an 18-year-old apple orchard, located in the Abestan region of Khorramabad city, and the immersion phase was carried out in the laboratory after harvesting at Lorestan University. After initial washing, the fruits were first washed with distilled water, dried and then immersed in calcium chloride solution at room temperature for 8 minutes. Then, in the vicinity of the cool air flow, in order to ensure the removal of excess surface moisture, it was kept in plastic fruit boxes and in the refrigerator at a temperature of 4 ° and a relative humidity of 80-90% until the time of measuring the parameters. In this study, physiological and biochemical characteristics such as weight loss, acidity, titratable acids, soluble solids, ripening index, vitamin C and malondialdehyde were investigated. Results and Discussion The results of the research showed that the treatments used affected the investigated characteristics of apple fruit. The treated fruits had less weight loss than the control treatment. Examining the biochemical characteristics also showed the positive effect of all the treatments on the desired parameters, so that the most titratable acids, vitamin C and the least amount of acidity and malondialdehyde were obtained in the combined treatments of nano chitosan and calcium chloride. Also, the treatments used reduced the soluble solids and fruit ripening index. Coatings such as chitosan create a barrier with selective permeability against oxygen and carbon dioxide gases and create an altered atmosphere by placing carbon dioxide at a higher level and reducing oxygen around the fruit, which process increases respiration rate and ethylene production. reduce the aging process. Conclusion Based on the general results, it can be stated that the application of 100 mg/lit chitosan nanoparticle treatments in the pre-harvest stage along with the immersion of the fruits in the post-harvest stage in a 2% calcium chloride solution, in most features It showed better results than other treatment levels.

View Article

The effect of salinity stress and the application of silver nanoparticles on flowering and some physico-biochemical characteristics of French parsley (Tagetes patula L.)

Khatoun Behzad; Abdollah Ehtesham Nia; Mohamadreza Raji; Hasan Moumivand; Majid Alikhani-Koupaei

Volume 47, Issue 2 , August 2024, , Pages 275-291

https://doi.org/10.22055/ppd.2024.45252.2130

Abstract

IntroductionSalinity stress leads to ion toxicity and osmotic stress. Salinity stress through the osmotic mechanism, due to the reduction of the osmotic potential of the soil solution, ... Read More IntroductionSalinity stress leads to ion toxicity and osmotic stress. Salinity stress through the osmotic mechanism, due to the reduction of the osmotic potential of the soil solution, causes disturbances in transpiration and photosynthesis. The mechanism of action of ionic toxicity is also related to ion absorption and changes in physiological processes caused by toxicity, deficiency or change in the balance of mineral elements. In the last decade, the tendency to use metal nanoparticle compounds in agriculture and horticultural sciences has become popular. Researchers believe that silver nanoparticles are absorbed faster by plants due to their small size and high solubility, therefore, by using these materials, optimal conditions for plant growth are created and stress conditions are prevented in the plant.Materials and MethodsThe experiment was conducted in the greenhouse of Horticultural Science Department, Faculty of Agriculture located in Khorramabad city, Lorestan province in 2021. The experiment was conducted as a factorial in the form of a completely randomized design with four replications. The first factor was included salinity treatment at four levels (0, 25, 50 and 100 mM NaCl, respectively equivalent to 0.067, 2.450, 5.440 and 9.520 dS m-1) and the second factor was foliar application of nanosilver at 4 levels (0, 10, 50 and 100 ppm). Salinity treatments were started gradually with the application of low concentration of salt after establishing the plants in the pot. Nano silver foliar spraying was applied weekly for 5 times until the flowering stage. Foliar spraying with silver nanoparticles was done in 3 stages of four leaves, full growth and flowering.Results and DiscussionIn this study, application of nanosilver increased the quantitative and qualitative characteristics of parsley, including the fresh weight of the flower (by 2.23%). Nanosilver in concentrations of 10 and 50 mg/liter increases the relative content of leaf water (7.70%), the content of total phenol (5.96%), the content of total flavonoids (34.91%) and the amount of potassium in leaves (4.055 %) under salinity stress conditions. Additionally, the lowest amount of sodium leaf (0.162 %), ion leakage (25.44 %) and malondialdehyde (21.56 %) was observed in this treatment. Researchers believe that silver nanoparticles are absorbed faster by plants due to their small size and high solubility, therefore, by using these materials, optimal conditions for plant growth are created and any stressful conditions are prevented in the plant. Silver nanoparticles with suitable size and remarkable chemical stability remain in constant shape and size in solutions.ConclusionBased on the results observed in this study, the treatment of silver nanoparticles in concentrations of 10 and 50 ppm in the conditions of salinity stress, relative water content of leaves, potassium content of leaves, fresh and dry weight of flowers and time of budding and flowering were increased, while ion leakage, malondialdehyde, proline, total phenol and flavonoid content, and sodium content of leaves were decreased. Therefore, it can be stated that the application of silver nanoparticles in the form of foliar spraying at levels of 10 and 50 ppm can reduce the negative effects caused by salinity stress and improve the ornamental characteristics of parsley in 25 and 50 mM of salinity stress..

Investigating the effects of post-harvest application of nanocellulose/carvacrol composite coating on the physico-biochemical characteristics of physalis fruit

Leila Feryidouni; Abdollah Ehtesham Nia; Hassan Moumivand; Mohamadreza Raji

Volume 46, Issue 4 , March 2024, , Pages 569-582

https://doi.org/10.22055/ppd.2023.42926.2078

Abstract

Introduction Food safety is one of the important issues related to fresh fruits and vegetables. Most natural compounds are degradable and can be a safe compound for human health and ... Read More Introduction Food safety is one of the important issues related to fresh fruits and vegetables. Most natural compounds are degradable and can be a safe compound for human health and the environment and an alternative to synthetic compounds. Research has shown that the combination of bioactive substances such as essential oils, plant extracts and nanocomposites increases the active effect of the coating as fruit packaging and reduces the rate of fruit deterioration. Materials and Methods In this research, physalis fruits were obtained from Khorramabad research greenhouse. Nanocellulose and pure carvacrol (extracted from Satureja khuzistanica Jamza ( were prepared from Nanovin Nano Polymer Company and GC/MS analysis from Khorramabad Pharmaceutical Company, respectively. Also, the combination of nanocellulose with carvacrol was prepared in the laboratory. The experiment was conducted as a factorial experiment with two factors in a completely randomized design with 4 replications. The first factor of material type in specific concentrations at nine levels (control, Car 0.3%, Car 0.6%, CNF 0.5%, CNF 1.5%, Car 0.3 + CNF 0.5%, Car 0.3 + CNF 1.5%, Car 0.6 + CNF 0.5 %, Car 0.6+CNF 1.5% and the second storage time factor was investigated at four levels (0, 45, 90 and 135 days). First, the fruits of Physalis were washed with distilled water, and then the extra leaves and damaged fruits were removed. The fruits were placed in the prepared solution for 2-3 minutes and after applying the treatment, the fruits were placed in a refrigerator with a temperature of 4 °and 90% RH. Results and Discussion The results showed that the fruits treated with nanocellulose and carvacrol had less weight loss and higher tissue firmness. Byochemiucal analysis also showed the positive effect of the treatments on parameters, so that the highest TA and vitamin C and the lowest amount of pH were obtained in the combined treatments of nanocellulose and nanocellulose/carvacrol. Also, the treatments used reduced the TSS and fruit TSS/TA ratio of the fruits, and the combined treatments had the lowest amount. The nanocellulose coating prevents water loss and reduces the metabolic and respiration processes. Also, nanocellulose/carvacrol composite coatings lead to an increase in the pH of cytochrome oxidase by reducing internal oxygen, and this enzyme increases the rate of ascorbic acid decomposition. By coating on the fruit during the post-harvest period, the aging process of the fruit is reduced the production and effect of ethylene, reducing respiration and preserving the cell wall, which ultimately leads to better preservation of TSS. Therefore, any reduction in metabolic activities causes a reduction in fruit ethylene biosynthesis and action. Conclusion In general, the results of the research showed that the investigated characteristics of physalis fruit were influenced by the treatments. As treated samples, weight loss was less, pH, soluble solids and taste index were lower, tissue firmness, titratable acids and vitamin C were higher. According to the general results, it can be stated that the application of nanocellulose/carvacrol composite treatments, especially the Car 0.6+CNF 1.5% treatment, showed more favorable results than the application of each one alone in most features. .

Articles in Press

Current Issue

Volume 47 (2024)

Volume 46 (2023)

Volume 45 (2022)

Volume 44 (2021)

Volume 43 (2020)

Volume 42 (2019)

Volume 41 (2018)

Volume 40 (2017)

Volume 39 (2016)

Volume 38 (2015)

Volume 37 (2014)

Volume 36 (2013)

Volume 35 (2012)

Volume 34 (2011)

Volume 33 (2010)

Volume 32 (2009)

Author = Mohamadreza Raji

Investigating the physicochemical changes of Golden Delicious apple fruit (Malus domestica cv. Golden Delicious) with the application of chitosan and nanochitosan before harvesting and calcium chloride immersion after harvesting

Abstract

The effect of salinity stress and the application of silver nanoparticles on flowering and some physico-biochemical characteristics of French parsley (Tagetes patula L.)

Abstract

Investigating the effects of post-harvest application of nanocellulose/carvacrol composite coating on the physico-biochemical characteristics of physalis fruit

Abstract